[HowTo] Install and configure Oleg's firmware

Printable View

Show 40 post(s) from this thread on one page

01-01-2009, 16:49
lapcat

Works fine, thank you. Again. :D

One question: What's the password for Samba? When i try to open http://192.168.1.1:901/ i get

Quote:

401 Bad Authorization
username or password incorrect

although i used the password set for the router interface.

LE: Everything works, if only the user wasn't a n00b. :D
04-01-2009, 15:24
quazar

Can get transmission to work --> Permission denied

Dear Wengi,
Many thanks for your great HowTo! I've managed to format the HDD.

Unfortunately, I can get Transmission working on my setup (WL-500W with Oleg 1.9.2.7-10 and an USB memory card or USB-HDD).

I get the following error when starting S90transmission-daemon:

Code:

/opt/etc/init.d/S90transmission-daemon: /opt/etc/init.d/S90transmission-daemon: 36: /tmp/harddisk/transmission/config: Permission denied

transmission-daemon is not started according to ps axf.

When starting transmission with "$transmission-daemon", or

Code:

$transmission-daemon -g /tmp/harddisk/transmission/config

the program starts, but I get the following error when I try to enter 192.168.1.1:9091

Code:

401: Unauthorized Unauthorized IP Address. Either disable the IP address whitelist or add your address to it. If you're editing settings.json, see the 'rpc-whitelist' and 'rpc-whitelist-enabled' entries. If you're still using ACLs, use a whitelist instead. See the transmission-daemon manpage for details.

I've tried changing the rpc-whitelist, in the settings.json, but without success.

I have followed your HowTo, but cannot figure out what Permission is denied?!?

edit: "chmod a +rwx" the settings file and download directory also did not help
04-01-2009, 22:34
lapcat

Check your instalation again, you probably missed something.

Is there a limit to the number of torrents that Transmission can hadle?
05-01-2009, 14:40
skylin3d

I have the same problem, it says like this:

Code:

/opt/etc/init.d/S90transmission-daemon: /opt/etc/init.d/S90transmission-daemon: 36: /tmp/harddisk/transmission/config: Permission denied [admin@asus root]$ ps axf BusyBox v1.1.3 (2008.04.25-08:17+0000) multi-call binary Usage: ps
07-01-2009, 09:28
wengi

Hi,

please check the permissions of /tmp/harddisk/transmission/config
Should be something like

Code:

[admin@blechbuechse root]$ ls -la /tmp/harddisk/transmission total 16 drwxrwx--- 4 admin root 4096 Dec 13 22:47 . drwxr-xr-x 5 admin root 4096 Dec 14 00:24 .. drwxrwx--- 5 admin root 4096 Dec 21 18:18 config drwxrwx--- 3 admin root 4096 Dec 14 13:21 download [admin@blechbuechse root]$

Make sure you have read/write permission.

If not, execute:

Code:

chmod -R 770 /tmp/harddisk/transmission/

wengi
07-01-2009, 15:01
skylin3d

Hello, I still have the same problem, chmod didn't help.

mine looks like this:

Code:

[admin@asus root]$ ls -la /tmp/harddisk/transmission drwxrwx--- 1 admin root 0 Jan 5 15:27 . drwxr-xr-x 1 admin root 0 Jan 5 15:19 .. drwxrwx--- 1 admin root 0 Jan 5 15:27 config drwxrwx--- 1 admin root 0 Jan 5 15:27 download
07-01-2009, 16:54
wengi

Hi,

please post result of

Code:

ls -la /tmp/harddisk/transmission/config

wengi
07-01-2009, 18:05
skylin3d

It says:

Code:

[admin@asus root]$ ls -la /tmp/harddisk/transmission/config drwxrwx--- 1 admin root 0 Jan 5 15:27 . drwxrwx--- 1 admin root 0 Jan 5 15:27 .. drwxrwx--- 1 admin root 0 Jan 5 15:27 blocklists -rwxrwx--- 1 admin root 474 Jan 5 15:28 settings.json [admin@asus root]$
09-01-2009, 11:29
wengi

Hi,

strange... Same permissions here. Working fine.
Please post content of

Code:

cat /opt/etc/init.d/S90transmission-daemon

What happens if you start it manually?

Code:

/opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config

wengi
09-01-2009, 17:10
skylin3d

Hello, here are the results:

Code:

[admin@asus root]$ cat /opt/etc/init.d/S90transmission-daemon #!/bin/sh # # Startup script for transmission-daemon case $1 in start) # update blocklist echo "updating blocklist, ~4MB" cd /tmp/harddisk/transmission/config/blocklists wget -q http://www.bluetack.co.uk/config/level1.gz if test -f level1.gz; then rm level1 gunzip level1.gz chmod go+r level1 fi # start transmission echo "starting transmission" /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config ;; stop) if [ -n "`pidof transmission-daemon`" ]; then kill -9 `pidof transmission-daemon` fi ;; restart) $0 stop $0 start ;; *) echo "usage: $0 (start|stop|restart)" exit 1 esac [admin@asus root]$

and:

Code:

[admin@asus root]$ /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config /opt/bin/transmission-daemon: illegal option -- g usage: transmission-daemon [-dfh] [-p file] [-s file] Transmission 0.82 (r) http://transmission.m0k.org/ A free, lightweight BitTorrent client with a simple, intuitive interface -d --debug Print data send and received, implies -f -f --foreground Run in the foreground and log to stderr -h --help Display this message and exit -p --pidfile <path> Save the process id in a file at <path> -s --socket <path> Place the socket file at <path> To add torrents or set options, use the transmission-remote program. [admin@asus root]$
10-01-2009, 16:16
wengi

Hi,

first: Do an update of your system:

Code:

ipkg update ipkg upgrade

You are using a REAL old version of transmission.
New versions are 1.4x.

If the above does not update transmission do the following:

Code:

ipkg remove transmission ipkg install transmission

second:
Make sure that this is ONE line in S90transmission-daemon

Code:

/opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config

I think you have this code in two lines.

wengi
11-01-2009, 02:54
drevnerussky

More downloading information?

hi,

I have used the older version of transmission before, the older interface has more information(files, download speed record...). Where can i find these information in the new version?

thanks

ps. sorry for my English.
11-01-2009, 09:56
wengi

Hi,

all these informations can be found in the webinterface (clutch).
simply give it a try.

wengi
11-01-2009, 22:36
swordfish77

Transmission: Start-up script error..

Hello everyone! I try to setup transmission,at the end i copy syntax for start-up script and when i try to save and exit with :wq ,the vi editor reports me this: write error: No such file or directory. Can help me someone? Thank u.:confused:
12-01-2009, 08:46
al37919

2swordfish77
I guess you have to create file first with touch

Show 40 post(s) from this thread on one page