Ïðîøèâêà Îëåãà íà ðîóòåðå DIR-320

boroda_78 Îãðîìíîå ñïàñèáî!!! :rolleyes: Ïîñëå äîáàâëåíèÿ ýòîé ñòðîêè âñ¸ çàðàáîòàëî ñ ïåðâîãî ðàçà! :) óæå õîòåë ïðîäàâàòü ýòîò ìîäåì. :D.
Ìó÷èëñÿ òî ñ íåäåëþ, õîòÿ èçó÷àë linux ýòî åäèíñòâåííûé ïëþñ. :D
Òàê ÷òî Âû ñïàñëè ìåíÿ îò íåïðåäâèäåííûõ ðàñõîäîâ ïî çàìåíå ìîäåìà è çàáëóæäåíèé ÷òî âî âñ¸ì âèíîâàò DIR320. :eek:
Ñòðàííî íî áåç ýòî ñòðîêè "ipcp-accept-remotå" ó ìåíÿ ñîåäèíÿëñÿ îáû÷íûé ñîòîâûé áåç ïðîáëåì, ñ ýòèìå æå ñêðèïòàìè.
È åù¸ îäíî - ëîã âñ¸ ðàâíî ñ ýòîé æå ñòðîêîé "Jan 1 07:00:21 pppd[97]: Could not determine remote IP address: defaulting to 10.64.64.64" íî ñîåäèíåíèå íå ðâ¸òñÿ.
Ìîæåò ìíå êòî íèáóäü îòâåòèò ïî÷åìó ñîòîâûé ñ òîé æå ñèìêîé ñîåäèíÿåòñÿ ïî PAP à ìîäåì ïî CHAP è remote IP â ïåðâîì ñëó÷àå âñåãäà 10.6.6.6 à ÷åðåç ìîäåì 10.64.64.64 è ïðè ïîäêëþ÷åíèè ÷åðåç ñîòîâûé íåò ñòðîêè c "determine remote IP address..."

Ïðîñüáà äàòü ññûëêó íà ïîñëåäíþþ ïðîøèâêó ñî âñòðîåííîé MPCS äëÿ WL500gpV2 (êàæåòñÿ 229) è ãäå ñêà÷àòü ïîñëåäíþþ MPCS, ÷òîáû çàëèòü â ïðîøèâêó. Ïîäñêàæèòå ãäå â WEB-èíòåðôåéñå îòêëþ÷àåòñÿ WiFi. Çàðàíåå ñïàñèáî.

Quote:

---

Originally Posted by tim26

... Ïîäñêàæèòå ãäå â WEB-èíòåðôåéñå îòêëþ÷àåòñÿ WiFi. Çàðàíåå ñïàñèáî.

---

Wireless -> Advanced -> Enable Radio? Yes/No

Quote:

---

Originally Posted by Komandir

Òàê æå íàäî èñïðàâèòü ñêðèïòû event.sh (÷òî áû íå ìíîæèëñÿ udhcpc) è udhcpc.script (÷òî áû íå ïîâòîðÿëèñü ñòðîêè nameserver ... è ÷òî áû ïðè íåîáõîäèìîñòè ñèíõðîíèçèðîâàëñÿ dyndns)

---

Òàæå ñàìàÿ áåäà, òîëüêî ïðî /cd äîäóìàëñÿ ñàì òàê êàê ñòàâèë ðàíåå îòäåëüíî ïðîøèâêó è madwimax (c õàáîì è ôëåøêîé).
Ðåøèë ïîïðîáîâàòü áåç ôëåøà, è ïîëó÷èë ïðèìåðíî òå æå ñèìïòîìû - ïðè ñòàðòå èíåò åñòü, èï ìîäåì ïîëó÷àåò, íî ÷åðåç ñåê 30 îòâàëèâàåòñÿ. Ïðè ýòîì top ïîêàçûâàåò ÷òî çàïóùåíà êó÷à ïðîöåññîâ udhcpc, â ëîãàõ ñïàì nameserver. Êàê c ýòèì áîðîòüñÿ ñâîèìè ñèëàìè?
Çàðàíåå ñïàñèáî.

Quote:

---

Originally Posted by Maestro

Òàæå ñàìàÿ áåäà, òîëüêî ïðî /cd äîäóìàëñÿ ñàì òàê êàê ñòàâèë ðàíåå îòäåëüíî ïðîøèâêó è madwimax (c õàáîì è ôëåøêîé).
Ðåøèë ïîïðîáîâàòü áåç ôëåøà, è ïîëó÷èë ïðèìåðíî òå æå ñèìïòîìû - ïðè ñòàðòå èíåò åñòü, èï ìîäåì ïîëó÷àåò, íî ÷åðåç ñåê 30 îòâàëèâàåòñÿ. Ïðè ýòîì top ïîêàçûâàåò ÷òî çàïóùåíà êó÷à ïðîöåññîâ udhcpc, â ëîãàõ ñïàì nameserver. Êàê c ýòèì áîðîòüñÿ ñâîèìè ñèëàìè?
Çàðàíåå ñïàñèáî.

---

íàäî èñïðàâèòü â event.sh

Code:

---

#!/bin/sh
case "$1" in
if-create)
        iptables -I FORWARD -o "$2" -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
        ;;
if-up)
        udhcpc -b -p /var/run/udhcpc."$2".pid -i "$2" -s /opt/etc/udhcpc/udhcpc.script
        iptables -t nat -A POSTROUTING -o "$2" ! -s $(ifconfig "$2" | sed -n 's/^.*inet addr:\([0-9]*\.[0-9]*\.[0-9]*\.[0-9]*\)  .*$/\1/p') -j MASQUERADE
        ;;
if-down)
        iptables -t nat -D POSTROUTING -o "$2" ! -s $(ifconfig "$2" | sed -n 's/^.*inet addr:\([0-9]*\.[0-9]*\.[0-9]*\.[0-9]*\)  .*$/\1/p') -j MASQUERADE
        kill -TERM `cat /var/run/udhcpc."$2".pid`
        ;;
if-release)
        iptables -D FORWARD -o "$2" -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
        ;;
*)
        echo "Usage: $0 { if-create | if-up | if-down | if-release }" >&2
        exit 3
        ;;
esac

---

äîáàâèòü â udhcpc.script

Code:

---

#!/bin/sh

RESOLV_CONF=/tmp/resolv.conf

case "$1" in
        bound|renew)
        ifconfig $interface up
        ifconfig $interface $ip netmask $subnet
        route add default gw $router
                for ii in $dns; do
                if [ -z "`cat $RESOLV_CONF | grep $ii`" ]; then
                echo nameserver $ii >> $RESOLV_CONF
                fi
                done
# trigger dnsmasq restart
        kill -s SIGHUP `pidof dnsmasq`
        ;;
        deconfig)
        ifconfig $interface 0.0.0.0
        #ifconfig $interface down
        echo deleting $RESOLV_CONF
        echo -n > $RESOLV_CONF
        kill -s SIGHUP `pidof dnsmasq`
        ;;
        esac

---

äîáàâèòü â post-boot èëè post-mount

Code:

---

#!/bin/sh
mount /tmp/local/opt /opt
insmod tun.o
(while true; do /opt/sbin/madwimax -qof ; sleep 10; done )&
(while true; do ping www.yota.ru >> /dev/null; done )&

---

Komandir ñïàñèáî çà ïîìîùü, âñå çàðàáîòàëî :) Âîïðîñ âîçíèê òîëüêî íàñ÷åò ñòðîêè ïèíãà yota.ru - ñâèñòîê èìååò îáûêíîâåíèå îòâàëèâàòüñÿ ïî òàéìàóòó åñëè êàíàë íå íàãðóæåí?

hijaq, áëàãîäàðþ çà àäàïòàöèþ ïðîøèâêè :) Ñ þñá õàáîì çàíèìàëî ñëèøêîì ìíîãî ìåñòà íà ñòåíå.

Quote:

---

Originally Posted by Maestro

Âîïðîñ âîçíèê òîëüêî íàñ÷åò ñòðîêè ïèíãà yota.ru - ñâèñòîê èìååò îáûêíîâåíèå îòâàëèâàòüñÿ ïî òàéìàóòó åñëè êàíàë íå íàãðóæåí?

---

Íå çíàþ ïî êàêîìó ïðèíöèïó ñâèñòîê îòâàëèâàåòñÿ, íî 100 % ïåðèîäè÷åñêè îòâàëèâàåòñÿ. Îñîáåííî êîãäà çàêàí÷èâàåòñÿ àðåíäà IP.

Íå ìîãó çàñòàâèòü ðàáîòàòü ìîäåì òåë Íîêèà-e51
äåëàë êàê íàïèñàíî çäåñü: http://red-forum.com/showthread.php?t=6780

ïîñëå çàïóñêà:
[admin@(none) root]$ insmod usbserial vendor=0x0421 product=0x0042 maxSize=4096
[admin@(none) root]$ pppd call dialup
Script /usr/sbin/chat -s -S -V -t 60 -f /tmp/ppp/dialup.chat 2>/tmp/chat.log fin
ished (pid 189), status = 0x3
Connect script failed

ïðèíóäèòåëüíî ïðåðâàë ÷åðåç 5 ìèíóò
tcsetattr: Interrupted system call (line 1032)
Terminating on signal 2
[admin@(none) root]$

ìîé ëîã:
Jan 1 00:00:04 kernel: usb.c: registered new driver usblp
Jan 1 00:00:04 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 00:00:06 kernel: usb.c: registered new driver audio
Jan 1 00:00:06 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 00:00:06 kernel: hub.c: new USB device 00:03.0-1, assigned address 2
Jan 1 00:00:06 kernel: usb.c: USB device 2 (vend/prod 0x421/0x42) is not claimed by any active driver.
Jan 1 00:00:06 kernel: Linux video capture interface: v1.00
Jan 1 00:00:06 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 00:00:06 kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:06 kernel: usb.c: registered new driver usb-storage
Jan 1 00:00:06 kernel: USB Mass Storage support registered.
Jan 1 00:00:06 kernel: vlan2: Setting MAC address to 00 90 4c c0 00 00.
Jan 1 00:00:06 kernel: VLAN (vlan2): Underlying device (eth0) has same MAC, not checking promiscious mode.
Jan 1 00:00:07 dnsmasq[67]: read /etc/hosts - 2 addresses
Jan 1 00:00:07 dhcp client: deconfig: lease is lost
Jan 1 00:01:14 login[134]: root login on 'pts/0'
Jan 1 00:01:37 login[141]: root login on 'pts/1'
Jan 1 00:03:58 kernel: usb.c: registered new driver serial
Jan 1 00:03:58 kernel: usbserial.c: USB Serial support registered for Generic
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: Generic converter detected
Jan 1 00:03:58 kernel: usbserial.c: Generic device with no bulk out, not allowed.
Jan 1 00:03:58 kernel: usbserial.c: USB Serial Driver core v1.4
Jan 1 00:04:41 pppd[188]: pppd 2.4.5 started by admin, uid 0
Jan 1 00:05:43 pppd[188]: Connect script failed
Jan 1 00:24:50 pppd[188]: tcsetattr: Interrupted system call (line 1032)
Jan 1 00:24:53 pppd[188]: Terminating on signal 2
Jan 1 00:24:53 pppd[188]: Exit.

×òî íè òàê äåëàë? î÷åíü õî÷åòñÿ íà äà÷ó øàðó ñäåëàòü.

Quote:

---

Originally Posted by Dimcho

andr128 Ïîðò êàêîé â dialup ïðîïèñàë? Ïîïðîáóé ñìåíèòü "0" íà "1".
Íå ïîìîæåò, âûêëàäûâàé òàì íà ñàéòå ñêðèïò dialup, òåáå òàì ïîìîãóò áûñòðåå :D


Ìîæåò ìíå êòî íèáóäü îáúÿñèòü êàê ýòî âûïîëíÿåòñÿ (àëãîðèòì)
Ïîòîìó óñëîâèå íå âûïîëíÿåòñÿ, à ñèíòàêñèñà ÿ íå ïîíèìàþ

Code:

---

$S='POP'
....
ping -c 3 -s 0 ya.ru | grep "100% packet loss">$S
echo $S
if [ -s $S ]; then
....

---

èëè òêíèòå íîñîì ãäå ïî÷èòàòü ïî ñèíòàêñèñó, êîìàíäàì è îïåðàòîðàì !/bin/sh. Âñ¸ îáëàçèë ïóòíîãî íè÷åãî íå íàø¸ë.
Çàðàíåå áëàãîäàðåí :rolleyes:

---

 òåìå äëÿ íîâè÷êîâ è ëåíèâûõ âñ¸ åñòü !!!

ñêàæèòå, åñòü ëè ïîääåðæêà ÍÒÔÑ íà çàïèñü?
Âêðàòöå - åñòü D'Link DIR-320 è USB HDD 500 Gb õî÷åòñÿ íà âèíò ëèòü òîðåíòû è ïî-ñåòêè (samba) ñìîòðåòü ôîòêè, ñîõðàíèâ ñîâìåñòèìîñòü ñ Windows.

Quote:

---

Originally Posted by ser9ey

ñêàæèòå, åñòü ëè ïîääåðæêà ÍÒÔÑ íà çàïèñü?
Âêðàòöå - åñòü D'Link DIR-320 è USB HDD 500 Gb õî÷åòñÿ íà âèíò ëèòü òîðåíòû è ïî-ñåòêè (samba) ñìîòðåòü ôîòêè, ñîõðàíèâ ñîâìåñòèìîñòü ñ Windows.

---

Âñòðîåííîé â ïðîøèâêó ïîääåðæêè íåò. Åñëè åñòü æåëàíèå áûòü àëüôà-òåñòåðîì, ìîæíî ïîñòàâèòü ïðîøèâêó 1.9.2.7-d îò lly è ìîäóëü ntfs-3g, êîòîðûé îí æå âûêëàäûâàë äëÿ òåñòèðîâàíèÿ. Åñòåñòâåííî, ñîõðàííîñòü äàííûõ ïðè ýòîì íèêòî íå ãàðàíòèðóåò ;)

Âñåì êòî áóäåò ñòàâèòü SSH (èç ìàíóàëà) ïîñëå ïðîøèâêè è óñòàíîâêè äðàéâåðîâ ìîäåìà, áûòü êðàéíå îñòîðîæíûìè ñî ñòðîêàìè

Code:

---

echo "#!/bin/sh" >> /usr/local/sbin/post-boot
cp /usr/local/sbin/post-boot /usr/local/sbin/post-firewall
cp /usr/local/sbin/post-boot /usr/local/sbin/post-mount
cp /usr/local/sbin/post-boot /usr/local/sbin/pre-shutdown

---

Òàê êàê áåçäóìíîå âáèâàíèå îíûõ, âåäåò ê ãèáåëè èíåòà ïîñëå ïåðåçàãðóçêè.

Ìîæíî ïîéòè äðóãèì ïóò¸ì è â windows äîáàâèòü ïîääåðæêó ext2\3, äëÿ ýòîãî åñòü ñïåöèàëüíûé äðàéâåð.

Ñàìûé ëó÷øèé äðàéâåð - http://ext2fsd.sourceforge.net. Íî àêòèâíî èñïîëüçîâàòü ext3 ïîä âèíäîé íà çàïèñü íå ðåêîìåíäóåòñÿ, ò.ê. çàïèñü æóðíàëà íå ïîääåðæèâàåòñÿ. Åñëè íóæåí äîñòóï òîëüêî ÷òî ÷òåíèÿ - îòëè÷íûé âàðèàíò.
Åñòåñòâåííî, ñòàáèëüíàÿ ðàáîòà äðàéâåðà òîæå íå ãàðàíòèðóåòñÿ. Ó ìåíÿ ïàðó ðàç áûëè âûëåòû â ñèíèé ýêðàí ;)

Äîáàâèë â øàïêó òåìû ññûëêó íà ïðîøèâêó ñî âñòðîåííîé mpcs è ïîääåðæêîé USB ìîäåìîâ è òåëåôîíîâ.