SANE (Scanner server) - Any chance for WL-500g?

Printable View

Show 40 post(s) from this thread on one page

24-03-2008, 22:10
karlson911

I additionaly search sane sources for 'round' and found this in 'hpljm1005.c' file

PHP Code:

/* * List of pointers to devices - will be dynamically allocated depending * on the number of devices found. */ static SANE_Device **devlist = NULL; static void update_img_size (struct device_s *dev) { int dx, dy; /* Only update the width when not scanning, * otherwise the scanner give us the correct width */ if (dev->status == STATUS_SCANNING) { dev->height = -1; return; } dx = dev->optionw[X2_OFFSET] - dev->optionw[X1_OFFSET]; dy = dev->optionw[Y2_OFFSET] - dev->optionw[Y1_OFFSET]; switch (dev->optionw[RES_OFFSET]) { case 75: dev->width = round ((dx / ((double) MAX_X_S)) * 640); dev->height = round ((dy / ((double) MAX_Y_S)) * 880); break; case 100: dev->width = round ((dx / ((double) MAX_X_S)) * 848); dev->height = round ((dy / ((double) MAX_Y_S)) * 1180); break; case 150: dev->width = round ((dx / ((double) MAX_X_S)) * 1264); dev->height = round ((dy / ((double) MAX_Y_S)) * 1775); break; case 200: dev->width = round ((dx / ((double) MAX_X_S)) * 1696); dev->height = round ((dy / ((double) MAX_Y_S)) * 2351); break; case 300: dev->width = round ((dx / ((double) MAX_X_S)) * 2528); dev->height = round ((dy / ((double) MAX_Y_S)) * 3510); break; case 600: dev->width = round ((dx / ((double) MAX_X_S)) * 5088); dev->height = round ((dy / ((double) MAX_Y_S)) * 7020); break; case 1200: dev->width = round ((dx / ((double) MAX_X_S)) * 10208); dev->height = round ((dy / ((double) MAX_Y_S)) * 14025); break; } DBG(2,"New image size: %dx%d\n",dev->width, dev->height); }

May be i lack some type of program from repo to solve this trouble?
anybody knows?
thnx
25-03-2008, 08:52
oleo

Try

PHP Code:

LD_TRACE_LOADED_OBJECTS=1 scanimage -T

and post output here.
25-03-2008, 19:42
karlson911

Thats my output of 'LD_TRACE_LOADED_OBJECTS=1 scanimage -T' command

PHP Code:

libsane.so.1 => /opt/lib/libsane.so.1 (0x2aaaa000) libdl.so.0 => /opt/lib/libdl.so.0 (0x2aad7000) libusb-0.1.so.4 => /opt/lib/libusb-0.1.so.4 (0x2ab01000) libpthread.so.0 => /opt/lib/libpthread.so.0 (0x2ab19000) libm.so.0 => /opt/lib/libm.so.0 (0x2ab3c000) libjpeg.so.62 => /opt/lib/libjpeg.so.62 (0x2ab5b000) libtiff.so.3 => /opt/lib/libtiff.so.3 (0x2ab90000) libgcc_s.so.1 => /opt/lib/libgcc_s.so.1 (0x2abfd000) libc.so.0 => /opt/lib/libc.so.0 (0x2ac1c000) libz.so => /opt/lib/libz.so (0x2acd1000) ld-uClibc.so.0 => /opt/lib/ld-uClibc.so.0 (0x2aac0000)
07-04-2008, 18:05
karlson911

I still can't bring to work Sane with my HP LJ 1120 MFP

I think i should rewrite 'hpljm1005.c' without 'round' function, and then recompile sane.

Maybe error 'scanimage: can't resolve symbol 'round' appears because of bad or old system librarys (uclibs, glibc or something else) but all my movements to resolve this didn't lead to success.
03-09-2008, 03:40
carinfo

Hello all,

Sorry to dig up this old thread but it seemed the most appropriate one for my questions...........
I have an ASUS WL520GU & Epson Stylus CX3100 printer-scanner
Stock Asus firmware does not detect my Epson.
BTW, all linux distros detect CX3100 & I can use both printer +scanner with no problem at all.
I flashed the firmware to ddwrt.v.24_mini_generic & followed their wiki to add usb base drivers, printer, & scanner. In the end I managed to get printer working (but there is no info on the web UI about my printer). The info on the wiki about scanner is practically nothing (I only picked "ipkg -force-depends install kmod-usb-scanner) but still I managed to do "insmod /jffs/lib/modules/2.4.30/scanner.o" and "dmesg | grep usb" showed some info about scanner.
Google leads me to this thread & "ipkg -force-depends install xinetd" is a success but ipkg can not find sane-backends.

Then I flashed to Oleg firmware wl520gu-1.9.2.7-10.trx. Web UI detect my printer & I can use it (wired or wireless) with no problem at all.

My questions are:
- is the procedure indicated on page 2 of this thread still valid & can be applied to the firmware version that I am currently using??
- is there still any space left in my 4MB router? oleg fw = 3.6MB with usb storage, printer, camera,etc... vs ddwrt_mini= 2.8MB with no USB at all

Of course, it would be best if somebody can write up a new detail howto.
But still some leads and clues are highly appreciated as well

Thank you
04-09-2008, 00:02
oleo

Sane backends are available for oleg and dd'wrt firmware through Nslu2 Optware feeds. It should work if your scanner is supported. With additional USB key for software, maybe.
05-09-2008, 19:38
PanDor

Greetings. Has read, but has not understood, how to me to connect the scanner to Asus wl-500gp? Help. Stick with a nose.
23-10-2008, 21:07
dccharacter

it doesn't mount

Hi all, thanks for the thread. Trying to follow, but the scanner simply would not mount.

Code:

Oct 23 23:58:34 kernel: usb.c: registered new driver usbscanner Oct 23 23:58:34 kernel: scanner.c: 0.4.16:USB Scanner Driver Oct 23 23:58:34 kernel: scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product - 924:4265

What I'm missing here is a row that says "mounted to scanner0".

sane-find-scanner sees the MFD (Xerox 3119), but scanimage -L wouldn't work.

Possible reasons:
1. I put my username in the xinetd config, but ommited group (simply don't know how to find out what it should be)
2. Xerox 3119 is not supported by Sane (however I saw people working with it in Ubuntu)

If you know what's the problem, thanks in advance for helping me here. Best.
30-11-2008, 22:48
Aristotel

Hi everyone!
Could somebody give me correct /opt/etc/xinetd.d/saned file for samsung 4200 ?
Right now I have this one

Code:

service saned { port = 6566 socket_type = stream server = /opt/sbin/saned protocol = tcp user = root group = root wait = no disable = no }

But it's incorrect, because of errors

Code:

Nov 30 10:32:42 xinetd[296]: Bad socket type: stream^M [file=/opt/etc/xinetd.d/saned] [line=4] Nov 30 10:32:42 xinetd[296]: Error parsing attribute socket_type - DISABLING SERVICE [file=/opt/etc/xinetd.d/saned] [line=4] Nov 30 10:32:42 xinetd[296]: Server /opt/sbin/saned^M is not executable [file=/opt/etc/xinetd.d/saned] [line=5] Nov 30 10:32:42 xinetd[296]: Error parsing attribute server - DISABLING SERVICE [file=/opt/etc/xinetd.d/saned] [line=5] Nov 30 10:32:42 xinetd[296]: Protocol tcp^M not in /etc/protocols [file=/opt/etc/xinetd.d/saned] [line=6] Nov 30 10:32:42 xinetd[296]: Error parsing attribute protocol - DISABLING SERVICE [file=/opt/etc/xinetd.d/saned] [line=6] Nov 30 10:32:42 xinetd[296]: Unknown user: root^M [file=/opt/etc/xinetd.d/saned] [line=7] Nov 30 10:32:42 xinetd[296]: Error parsing attribute user - DISABLING SERVICE [file=/opt/etc/xinetd.d/saned] [line=7] Nov 30 10:32:42 xinetd[296]: Unknown group: root^M [file=/opt/etc/xinetd.d/saned] [line=8] Nov 30 10:32:42 xinetd[296]: Error parsing attribute group - DISABLING SERVICE [file=/opt/etc/xinetd.d/saned] [line=8] Nov 30 10:32:42 xinetd[296]: Bad value for wait: no^M [file=/opt/etc/xinetd.d/saned] [line=9] Nov 30 10:32:42 xinetd[296]: Error parsing attribute wait - DISABLING SERVICE [file=/opt/etc/xinetd.d/saned] [line=9] Nov 30 10:32:42 xinetd[296]: Bad value: no^M [file=/opt/etc/xinetd.d/saned] [line=10] Nov 30 10:32:42 xinetd[296]: Error parsing attribute disable - DISABLING SERVICE [file=/opt/etc/xinetd.d/saned] [line=10] Nov 30 10:32:42 xinetd[296]: 296 {init_services} no services. Exiting...

I understand, that i have incorrect values, but i don't have true parameters :(:(
Advise me somebody!!
01-12-2008, 15:22
Aristotel

Can anyone help? =(
01-12-2008, 15:45
wiz

try changing user = root to change to admin. That is if you logon to the box as admin.
01-12-2008, 18:34
Aristotel

I tried it, but nothing. =( it was a error too =(
08-02-2009, 00:10
tstlwk

Quote:

Originally Posted by Aristotel

Hi everyone!
Could somebody give me correct /opt/etc/xinetd.d/saned file for samsung 4200 ?
Right now I have this one

(snip....)

But it's incorrect, because of errors

Code:

Nov 30 10:32:42 xinetd[296]: Bad socket type: stream^M [file=/opt/etc/xinetd.d/saned] [line=4]

I understand, that i have incorrect values, but i don't have true parameters :(:(
Advise me somebody!!

To quote a post from earlier in this thread:

Quote:

Originally Posted by oleo

It is obvious that you have DOS CR/LF problem. Erase config and type if from scratch using vi.

All the ^M characters you see in the log are linefeed characters. They are probably in the config file because you edited it on a windows/dos (mac?) machine.
Make sure there are no more line feed characters in the file, for instance by starting over using vi.
http://www.brandonhutchinson.com/DOS...haracters.html
19-02-2009, 00:30
hooke

sane & canon i-sensys mf4010

hi all!
I have a WL500gP with Oleg's firmware v.1.9.2.7-10
Canon i-SENSYS MF4010 is connected to the router. Printing is no problem,but scanning...
On the sane-project.org it is said that the device may be supported but is untested.
sane-find-scanner says that it's found USB scanner:

PHP Code:

found USB scanner (vendor=0x04a9 [Canon Inc.], product=0x26b4 [MF4010]) at libusb:003:002

but scanimage -L says that

PHP Code:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

Has anybody managed to scan with this device using SANE?
Could anybody please say if there is some working backend for this device?

Thanks.
19-02-2009, 08:44
hooke

Further investigations

pixma backend is of 0.14.3 version:

PHP Code:

$ SANE_DEBUG_PIXMA=21 scanimage -L [sanei_debug] Setting debug level of dll to 0. [sanei_debug] Setting debug level of pixma to 21. [pixma] pixma version 0.14.3 [pixma] pixma_find_scanners() found 0 devices

I have installed sane-backends_1.0.19+cvs20080315-3_mipsel.ipk

But there is pixma v.0.15 in CVS already! I've googled in linux.debian.bugs.dist, that

Quote:

"several new ImageCLASS
MFPs are now supported by the pixma backend in CVS (v. 0.15.0).
Plus, the new pixma backend also supports BJNP network scanning for
several PIXMA MFPs, which would probably be welcomed by PIXMA
owners."

I'm not very familiar with compiling... Could somebody do this good job and recompile sane-backends 1.0.19 including latest CVS?
It would be greatly appreciated by many users of new Canon devices...
11-03-2009, 23:03
corwin_x

Hello all,

I'd like to ask anyone for help. I have an Epson DX4400 printer/scanner combo. I did everythink as described in the walkthrough, but I'm getting some strange error messages:

Result of sane-find-scanner

Quote:

found USB scanner (vendor=0x04b8 [Language Error], product=0x083f [Language Error]) at libusb:001:002

scanimage -L says nothing found.

Any ideas?

EDIT: While I was googling around a bit, I found that I'm most likely missing the epkowa backend... Is there a chance of somebody compiling it for Oleg's firmware for WL500g Premium?
15-03-2009, 15:43
carterb

Hi,

I've got the following problem.

I set up the sane-server on my WL500gP. Now I try to connect a Canon MP830 to the server.

scanimage -L

Code:

[admin@ASUS_WL500GP root]$ scanimage -L device `pixma:04A91713' is a CANON Canon PIXMA MP830 multi-function peripheral

and

Code:

found USB scanner (vendor=0x04a9 [Canon], product=0x1713 [MP830]) at libusb:003:005

look good in my opinion.

The sane-service is also started:

Code:

Service configuration: saned id = saned flags = IPv4 socket_type = stream Protocol (name,number) = (tcp,6) port = 6566 wait = no user = 0 group = 0 Groups = no PER_SOURCE = -1 Bind = All addresses. Server = /opt/sbin/saned Server argv = saned Only from: localhost(HOST) 10.0.0.0/255.0.0.0(NET)172.16.0.0 255.240.0.0(NET) 192.168.0.0/255 .255.0.0(NET) No access: No blocked sites Logging to syslog. Facility = authpriv, level = info Log_on_success flags = HOST PID Log_on_failure flags = HOST 09/3/15@16:40:51: DEBUG: 1206 {cnf_start_services} Started service: saned

Now if I try to scan an image out of XSane, I get the error-message

Code:

ERROR DURING READ: Error during device I/O

Any idea what could be the reason for that?

Thanks
Oliver
19-04-2009, 11:05
powertrain

Hello,

i have problems with a wl500gx Oleg 1.9.2.7-10
i have install sane but i downt get my HP AIO 5610 to run
i Have ead in the thread that it gives a hplip in the reository but how can
i install it ?

dit some one have run a working installation with a hp aio scanner ?

thanks Powertrain
03-05-2009, 17:32
ram32

Code:

[admin@WL-001FC642402C modules]$ ipkg install sane-backends Nothing to be done An error ocurred, return value: 4. Collected errors: Cannot find package sane-backends. Check the spelling or perhaps run 'ipkg update' [admin@WL-001FC642402C modules]$ cat /opt/etc/ipkg.conf #Uncomment the following line for native packages feed (if any) #src/gz native http://ipkg.nslu2-linux.org/feeds/optware/oleg/native/stable #src/gz optware http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable src unslung http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable dest /opt/ / #option verbose-wget

What's wrong?
13-09-2009, 09:44
carterb

Hi everybody,

for all of you, who have problems by setting up a sane scanne-server on your Asus-Router:
I compiled the actual stable version of the sane-server on my router and it works fine. The ipkg-package is not up to date, many scanners are not supported and you also need a newer version of router-firmware.
I wrote a little HowTo on how to setup the scanner-server with the XSane Frontend in the german Forum. If there are many users interested in a english translation, I can translat it an post it in the Tutorials section.
If you are able to read it in german language look here.

Edit: Here is the english translation of the Sane-Server How-To :)

Regards
Oliver
24-09-2009, 15:10
chem-vgasu

Hi all,
While getting scanner to work, I can't execute xinetd binary file from USB flash:

Code:

/opt/etc/init.d/S10xinetd: line 14: /opt/sbin/xinetd: not found $ /opt/sbin/xinetd -d -sh: /opt/sbin/xinetd: not found $ ls -l /opt/sbin/xinetd -rwxr-xr-x 1 admin root 195092 Jul 11 2008 /opt/sbin/xinetd

Package inetd is not found.
I tried both VFAT and ext3 journaling system (by mke2fs -j).
24-09-2009, 16:26
carterb

Hi,

tell us some more about your issue.

What system are you using, wich firmware?
How did you install the sane-scanner-server? Self-compiled or ipkg?
Did you try it after my tutorial?
If yes, please ask in the according thread, this thread is not well supported.

Bye
Oliver
24-09-2009, 22:54
chem-vgasu

Hi,
I'm using Oleg firmware 1.9.2.7 on DLink DIR-320. sane-backends and xinetd are installed by ipkg.
I'll try your tutorial later (I've seen it before), but the strange is I can't execute any executable file from my USB flash even when it is ext3 formatted. Of course, it's a bit off-topic here.
Maybe I'll try another USB flash disk.
25-09-2009, 09:52
carterb

Hi,

is your Disk mounted correctly?
Any other software working with xinetd.

Please post the output of:

Code:

df

and:

Code:

free

and move to folder /opt/

Code:

cd /opt

and do a

Code:

ls -all

Please post all the outputs. I'm not that familiar with your hardware.
Didi you setup your Router after wengis tutorial?

Quote:

Of course, it's a bit off-topic here

No problem, the whole thread is out of date ;)
13-01-2010, 04:41
dan_da_mick

can't edit /etc/services

I'm trying to follow alex_g's suggestions from 23-08-2005 -

6) add the following line to /etc/services:
saned 6566/tcp # SANE network scanner daemon

but I can't seem to edit my /etc/services file. It seems the filesystem is read-only, and I can't figure out how to make it rw. I'm running dd-wrt on an ASUS WL-520GU.

root@asus_router:/# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
/dev/mtdblock/4 on /jffs type jffs2 (rw)
/dev/discs/disc0/part1 on /opt type ext3 (rw)

I've tried lots of variations of the "mount" command to change it to rw, including

mount -no rw /

and other similar iterations. Every time I go back and check the status, the root fs is still (ro). Does anyone know how to change this?
18-01-2010, 11:08
carterb

Hi,

take a look at this How-To.

http://wl500g.info/showthread.php?p=160036#post160036

Regards
Oliver
30-07-2012, 09:50
bseos

Quote:

Originally Posted by carterb

Now if I try to scan an image out of XSane, I get the error-message

Code:

ERROR DURING READ: Error during device I/O

Did you ever discover what the problem was? I have the same issue with my canon mx310

here is my saned -d5 log:

Quote:

Tomato v1.28.9007 MIPSR2_RAF K26 USB VPN-NOCAT
root@E3000:/tmp/home/root# saned -d5
[saned] main: starting debug mode (level 5)
[saned] read_config: searching for config file
[saned] read_config: done reading config
[saned] saned (AF-indep+IPv6) from sane-backends 1.0.22 starting up
[saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo)
[saned] do_bindings: [0] socket () using IPv6
[saned] do_bindings: [0] setsockopt ()
[saned] do_bindings: [0] bind () to port 6566
[saned] do_bindings: [0] listen ()
[saned] do_bindings: [1] socket () using IPv4
[saned] do_bindings: [1] setsockopt ()
[saned] do_bindings: [1] bind () to port 6566
[saned] do_bindings: [1] bind failed: Address already in use
[saned] run_standalone: waiting for control connection

[saned] handle_connection: processing client connection
[saned] check_host: detected an IPv4-mapped address
[saned] check_host: access by remote host: ::ffff:192.168.1.62
[saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
[saned] check_host: local hostname: E3000
[saned] check_host: local hostname(s) (from DNS): c0a8:101:d841:b97f::
[saned] check_host: local hostname(s) (from DNS): c0a8:101:d841:b97f::
[saned] check_host: local hostname(s) (from DNS): c0a8:101:d841:b97f::
[saned] check_host: local hostname(s) (from DNS): E3000
[saned] check_host: local hostname(s) (from DNS): E3000
[saned] check_host: local hostname(s) (from DNS): E3000
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv
[saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory)
[saned] check_host: opening config file: saned.conf
[saned] check_host: config file line: `# saned.conf'
[saned] check_host: config file line: `# Configuration for the saned daemon'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `## Daemon options'
[saned] check_host: config file line: `# Port range for the data connection. Choose a range inside [1024 - 65535].'
[saned] check_host: config file line: `# Avoid specifying too large a range, for performance reasons.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# ONLY use this if your saned server is sitting behind a firewall. If your'
[saned] check_host: config file line: `# firewall is a Linux machine, we strongly recommend using the'
[saned] check_host: config file line: `# Netfilter nf_conntrack_sane connection tracking module instead.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# data_portrange = 10000 - 10100'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `## Access list'
[saned] check_host: config file line: `# A list of host names, IP addresses or IP subnets (CIDR notation) that'
[saned] check_host: config file line: `# are permitted to use local SANE devices. IPv6 addresses must be enclosed'
[saned] check_host: config file line: `# in brackets, and should always be specified in their compressed form.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# The hostname matching is not case-sensitive.'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `#scan-client.somedomain.firm'
[saned] check_host: config file line: `#192.168.0.1'
[saned] check_host: config file line: `#192.168.0.1/29'
[saned] check_host: config file line: `#[2001:7a8:185e::42:12]'
[saned] check_host: config file line: `#[2001:7a8:185e::42:12]/64'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and'
[saned] check_host: config file line: `# /etc/services must also be properly configured to start'
[saned] check_host: config file line: `# the saned daemon as documented in saned(8), services(4)'
[saned] check_host: config file line: `# and inetd.conf(4) (or xinetd.conf(5)).'
[saned] check_host: config file line: `192.168.1.0/24'
[saned] check_host: subnet with base IP = 192.168.1.0, CIDR netmask = 24
[saned] check_host: access granted from IP address 192.168.1.62 (in subnet 192.168.1.0/24)
[saned] init: access granted
[saned] init: access granted to Bob@::ffff:192.168.1.62
[saned] process_request: waiting for request
[saned] process_request: got request 1
[saned] process_request: waiting for request
[saned] process_request: got request 2
[saned] process_request: access to resource `pixma' granted
[saned] process_request: sane_open returned: Success
[saned] process_request: waiting for request
[saned] process_request: got request 4
[saned] process_request: waiting for request
[saned] process_request: got request 5
...
[saned] process_request: waiting for request
[saned] process_request: got request 5
[saned] process_request: waiting for request
[saned] process_request: got request 7
[saned] start_scan: trying to bind data port 0
[saned] start_scan: using port 29841 for data
[saned] process_request: waiting for data connection
[saned] process_request: access to data port from ::ffff:192.168.1.62
[saned] do_scan: start
[saned] do_scan: processing RPC request on fd 4
[saned] process_request: waiting for request
[saned] process_request: got request 6
[saned] do_scan: trying to read 8188 bytes from scanner
[saned] do_scan: read 0 bytes from scanner
[saned] do_scan: status = `Error during device I/O'
[saned] do_scan: statuscode `Error during device I/O' was added to buffer
[saned] do_scan: select_fd was closed --> EOF
[saned] do_scan: trying to write 9 bytes to client
[saned] do_scan: wrote 9 bytes to client
[saned] do_scan: done, status=End of file reached
[saned] process_request: waiting for request
[saned] process_request: got request 8
[saned] process_request: waiting for request
[saned] process_request: got request 5
[saned] process_request: waiting for request
...
[saned] process_request: waiting for request
[saned] process_request: got request 6
[saned] process_request: waiting for request

I should also state that i am using a usb hub to connect my printer and usb pendrive to the same usb port on my router (linksys e4200)
http://i.imgur.com/4L4k3.png

and here is my dmesg log when error occurs:

Quote:

Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000
ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
usblp: USB Printer Device Class driver
usb 1-1: new high speed USB device using ehci_hcd and address 2
vlan1: add 33:33:00:00:00:01 mcast address to master interface
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
vlan1: dev_set_allmulti(master, 1)
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
vlan1: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan1 entered promiscuous mode
usb 1-1.1: new high speed USB device using ehci_hcd and address 3
device eth1 entered promiscuous mode
usb 1-1.1: configuration #1 chosen from 1 choice
usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1728
usblp1: USB Bidirectional printer dev 3 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1728
usb 1-1.2: new high speed USB device using ehci_hcd and address 4
Registered led device: 1-1.1
usb 1-1.2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
Registered led device: 1-1.2
device eth2 entered promiscuous mode
br0: port 3(eth2) entering forwarding state
br0: port 2(eth1) entering forwarding state
br0: port 1(vlan1) entering forwarding state
vlan2: Setting MAC address to c0 c1 c0 1d d5 7c.
vlan2: add 33:33:00:00:00:01 mcast address to master interface
vlan2: add 01:00:5e:00:00:01 mcast address to master interface
scsi 0:0:0:0: Direct-Access SanDisk Cruzer Fit 1.26 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 15633408 512-byte hardware sectors (8004 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
TCP vegas registered
usb 1-1.1: usbfs: interface 1 claimed by usblp while 'saned' sets config #1
usb 1-1.1: usbfs: interface 1 claimed by usblp while 'saned' sets config #1
usb 1-1.1: usbfs: interface 1 claimed by usblp while 'saned' sets config #1
31-08-2012, 10:41
Zigster

Brother Scanner/Printer DCP-7055

I think I've got the same problem with the above Printer/Scanner.

I finally got my device (WL500GP V2) updated so this is what I get, when starting SANE standalone saned -d28 in the syslog:

Quote:

Aug 31 11:36:05 kernel: usb 1-1.2: usbfs: interface 0 claimed by usblp while 'saned' sets config #1

seems, that the wl500gp sticks to see the brother dcp 7055 as a printer only and while sane is trying to use it as a scanner, the kernel rejects that ...!

It would be great to know, how to solve that (BTW: scanimage -L doesn't list the scanner!)

Regards

Zigster

Show 40 post(s) from this thread on one page