Íóæíà ïîìîùü ñ Asus WL-700gE

÷òî çíà÷èò â ëîãå äîôèãà ñòðî÷åê:

Code:

---

May 14 00:51:37 -- MARK --

---

âêóðèë ñàì. êíèæêè ïî÷èòàë..

îäíàêî íà ïðàâàõ àïà:

ïëþíóë íà âñå è îáíîâèë ôèðìâàðü - îò kfurge 1.0.7.8_2.nas. ðåçåòíóë ðîóòåð, âáèë âñå ïî àíàëîãèè, ñ îäíîé ëèøü ðàçíèöåé ÷òî êðîìå ñòðîêè
Authentication Server: vpn.blablabla.net
äîáàâèë òàêîå æå â:
Host Name: vpn.blablabla.net

äëÿ ðàáîòîñïîñîáíîñòè èíåòà è ëîêàëêè ïðè óñëîâèè ÷òî öåïëÿåòñÿ êîìï áåç ðîóòåðà, ïðîâàéäåð ñîâåòóåò ïðîïèñàòü ðîóòû:

Quote:

---

route -p add 80.73.0.0 mask 255.255.240.0 10.6.19.õ
route -p add 10.0.0.0 mask 255.0.0.0 10.6.19.õ
route -p add 194.44.186.0 mask 255.255.255.0 10.6.19.õ
route -p add 194.143.148.0 mask 255.255.254.0 10.6.19.õ
route -p add 91.193.172.0 mask 255.255.252.0 10.6.19.õ
route -p add 93.95.184.0 mask 255.255.248.0 10.6.19.õ
route -p add 193.138.144.0 mask 255.255.252.0 10.6.19.õ
route -p add 239.0.0.0 mask 255.0.0.0 10.6.16.õ

---

ðóêîâîäñòâóÿñü ñâîèìè "ãëóáîêèìè" ïîçíàíèÿìè âáèë ïîäîáíîå:

Quote:

---

route add -net 80.73.0.0 netmask 255.255.240.0 gw 10.6.19.õ metric 1 eth0
route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.6.19.õ metric 1 eth0
route add -net 194.44.186.0 netmask 255.255.255.0 gw 10.6.19.õ metric 1 eth0
route add -net 194.143.148.0 netmask 255.255.254.0 gw 10.6.19.õ metric 1 eth0
route add -net 91.193.172.0 netmask 255.255.252.0 gw 10.6.19.õ metric 1 eth0
route add -net 93.95.184.0 netmask 255.255.248.0 gw 10.6.19.õ metric 1 eth0
route add -net 193.138.144.0 netmask 255.255.252.0 gw 10.6.19.õ metric 1 eth0
route add -net 239.0.0.0 netmask 255.0.0.0 gw 10.6.16.õ metric 1 eth0

---

â îáîèõ ñëó÷àÿõ:
10.6.19.õ - ãåòâåé wan
10.6.16.õ - wan-àäðåñ ðîóòåðà

ïîñëå "ðó÷íûõ" ìàíèïóëÿöèé ñ ðîóòàìè ïîëó÷èë â ëîãå:

Quote:

---

Jun 15 15:16:21 pptp[583]: log[usage:pptp.c:140]: pptp called with wrong arguments, program not started.
Jun 15 15:16:42 pptp[587]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
Jun 15 15:16:43 pptp[587]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 57472).
Jun 15 15:16:43 pppd[588]: pppd 2.4.2 started by root, uid 0
Jun 15 15:16:44 pppd[588]: Using interface ppp1
Jun 15 15:16:44 pppd[588]: Connect: ppp1 <--> /dev/pts/0
Jun 15 15:17:09 pppd[196]: Starting link
Jun 15 15:17:09 pppd[196]: Serial connection established.
Jun 15 15:17:09 pppd[196]: Connect: ppp0 <--> /dev/pts/2
Jun 15 15:17:19 pppd[588]: LCP: timeout sending Config-Requests
Jun 15 15:17:19 pppd[588]: Connection terminated.
Jun 15 15:17:20 pppd[588]: Exit.
Jun 15 15:17:20 pptp[585]: log[decaps_hdlc:pptp_gre.c:129]: short read (4294967295): Input/output error
Jun 15 15:17:20 pptp[587]: log[callmgr_main:pptp_callmgr.c:246]: Closing connection
Jun 15 15:17:20 pptp[587]: log[pptp_write_some:pptp_ctrl.c:376]: write error: Broken pipe
Jun 15 15:17:20 pptp[587]: log[call_callback:pptp_callmgr.c:89]: Closing connection
Jun 15 15:17:20 pptp[604]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
Jun 15 15:17:21 pptp[604]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 58368).
Jun 15 15:17:21 pppd[196]: Received bad configure-ack:
Jun 15 15:17:21 pppd[196]: Local IP address changed to 172.20.48.108
Jun 15 15:17:21 pppd[196]: Remote IP address changed to 172.16.10.1

---

èíåò çàðàáîòàë, íåíàäîëãî ïðàâäà. íà ÷åì îáîðâàëîñü íå ïîäñêàæó - ëîãè íå ñîõðàíèëèñü. ñåòêà æå ðàáîòàòü íå çàõîòåëà. ìîæåò ó êîãî âñå-òàêè õâàòèò âðåìåíè îêèíóòü ãëàçîì ìîè òðóäû è òêíóòü íîñîì ãäå ÿ íåïðàâ?

êðîìå òîãî, ïîäñêàæèòå êàê çàñòàâèòü øàéòàí-êîðîáêó çàïîìíèòü ìàðøðóòû? çàäîëáàëî èõ ðóêàìè ïîñëå êàæäîé ïåðåçàãðóçêè âáèâàòü

Âîïðîñ íå íîâûé, íî âðàçóìèòåëüíîãî îòâåòà íå íàøåë. Êàê â mldonkey óäàëèòü ôàéëû èç ïàïêè incoming?

Quote:

---

Originally Posted by amk

Âîïðîñ íå íîâûé, íî âðàçóìèòåëüíîãî îòâåòà íå íàøåë. Êàê â mldonkey óäàëèòü ôàéëû èç ïàïêè incoming?

---

http://wl500g.info/showthread.php?t=...ldonkey&page=2
Çàõîäè ïîä root è óäàëÿé

Íå ìîãó íèêàê íàñòðîèòü èíåò. Ò.ê. ýòîò ðîóòåð íå ïîääåðæèâàåò ñîåäèíåíèå ïî L2TP è PPTP ñ äèíàìè÷åñêèì IP, ïîâåðõ ëîêàëêè. Ìîæíî ëè ýòî èñïðàâèòü ïåðåïðîøèâêîé è êàê ïåðåïðîøèâàòü?

Îëåã íå äåëàë äëÿ 700 ïðîøèâêó.
À ó Âàñ ïîñëåäíÿÿ? (1.0.7.8) Ïîñëåäíÿÿ îô. äëÿ Ïðåìèóì ðàáîòàåò ñ Êîðáèíîé.
Ïðîáîâàëè ïîñòàâèòü ôèêñèðîâàíî òîò àäðåñ, êîòîðûé áûë ïîëó÷åí êîìïüþòåðîì, ïîäêëþ÷åííûì íàïðÿìóþ?

Âûïîëíèòå ïîäêëþ÷åíèå ê ëîêàëüíîé ñåòè ñ ïðèñâîåíèåì äèíàìè÷åñêîãî àäðåñà (ò. å. íàïðÿìóþ ê êîìïüþòåðó). Ïîñëå ýòîãî çàïèøèòå àäðåñ, ìàñêó, ãåéò, DNS êîòîðûå ó âàñ ïîëó÷èëèñü.

Äàëåå ïðîïèñûâàéòå èõ â íàñòðîéêàõ IP Config - WAN & LAN

WAN Connection Type: PPTP

WAN IP Setting
IP Address: 10.õõ.õõ.õõ
Subnet Mask: 255.255.0.0
Default Gateway: 10.õõ.õõ.õõ
WAN DNS Setting
Get DNS Server automatically? No
DNS Server1: õõ.õõ.õõ.õõ
DNS Server2: õõ.õõ.õõ.õõ

PPPoE or PPTP Account
User Name: õõõõõõõ(òî ÷òî äàëà Êîðáèíà)
Password: õõõõõõ(òî ÷òî äàëà Êîðáèíà)
Idle Disconnect Time in seconds(option): 3600

Special Requirement from ISP
Host Name: ïóñòî
MAC Address: ïóñòî
Authentication Server: (îäèí èç VPN ñåðâåðîâ êîòîðûõ âîçâðàùàåò êîìàíäà íàáðàííàÿ íà êîìïüþòåðå, ïðåäâàðèòåëüíî ïîäêëþ÷åííîì ê ñåòè: nslookup vpn.corbina.ru)

Reboot

.... à ÷åðåç íåäåëþ èëè ìåñÿö êîí÷àåòñÿ âàøà àðåíäà IP àäðåñà, îí âûäà¸òñÿ êîìó-òî åùå è .... âóàëÿ )

Ïðè âêëþ÷åííîì ðîóòåðå òàêîå íå ïðîèçîéäåò.
Ïðîâåðåíî! Ëè÷íî!

ß ô øîêå.. ÐÀÁÎÒÀÅÒ! Ñïàñàáî lifecom!
Òîëüêî âîò ÷åãî ÿ òåïåðü íå ïîíèìàþ, ýòî ñòðàíèöó ñòàòóñà ðîóòåðà:
Type: PPTP
IP Address: 78.106.238.90
Netmask: 255.255.255.255
Gateway: 85.21.0.62
DNS Servers: 213.234.192.8 85.21.192.3

èáî ÿ óêàçûâàë ìàñêó 255.255.248.0 è IP 10.48.82.215

Âñå âåðíî!
Íà êîìïå òàêæå: äâà ñîåäèíåíèÿ - äâà àäðåñà.

http://wl500g.info/attachment.php?attachmentid=3001

áîëüøå èíåò íà ðîóòåðå òàê è íå ïîäíÿëñÿ :(

ïîâòîðèë íàñòðîéêè ñ ðåñåòà, ïîñëå ðåáóòà:

Quote:

---

Jun 16 12:33:13 pppd[197]: Using interface ppp0
Jun 16 12:33:13 pppd[197]: local IP address 10.64.64.64
Jun 16 12:33:13 pppd[197]: remote IP address 10.112.112.112
Jun 16 12:33:17 pppd[197]: Starting link
Jun 16 12:33:18 pppd[197]: Serial connection established.
Jun 16 12:33:18 pppd[197]: Connect: ppp0 <--> /dev/pts/0
Jun 16 12:33:22 utelnetd[252]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Jun 16 12:33:38 pptp[206]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Jun 16 12:33:38 pppd[197]: Modem hangup
Jun 16 12:33:38 pppd[197]: Connection terminated.

---

êàê ÿ ïîíèìàþ, æåëåçÿêà íå ìîæåò äîñòó÷àòüñÿ äî âïí-ñåðâåðà

ïîñëå ðåáóòà ïðîïèñàâ ðîóòû (ïîÿâëÿåòñÿ ïèíã ê vpn.blablabla.net) è âûïîëíèâ
pptp vpn.blablabla.net (ìîæåò òóò êîñÿê?)
ïîëó÷àþ:

Quote:

---

Jun 16 12:39:46 dropbear[565]: Running in background
Jun 16 12:40:32 utelnetd: connection from: 192.168.1.2
Jun 16 12:40:36 login[597]: root login on `pts/0'
Jun 16 12:42:20 pptp[616]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
Jun 16 12:42:21 pptp[616]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 768).
Jun 16 12:42:21 pppd[617]: pppd 2.4.2 started by root, uid 0
Jun 16 12:42:21 pppd[617]: Using interface ppp1
Jun 16 12:42:21 pppd[617]: Connect: ppp1 <--> /dev/pts/1
Jun 16 12:43:00 pppd[195]: Starting link
Jun 16 12:43:00 pppd[195]: Serial connection established.
Jun 16 12:43:00 pppd[195]: Connect: ppp0 <--> /dev/pts/2
Jun 16 12:43:00 pptp[627]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
Jun 16 12:43:01 pptp[627]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 2304).
Jun 16 12:43:01 pppd[195]: Received bad configure-ack:
Jun 16 12:43:01 pppd[195]: Local IP address changed to 172.23.11.205
Jun 16 12:43:01 pppd[195]: Remote IP address changed to 172.16.10.1
Jun 16 12:43:02 pppd[617]: LCP: timeout sending Config-Requests
Jun 16 12:43:02 pppd[617]: Connection terminated.
Jun 16 12:43:03 pppd[617]: Exit.
Jun 16 12:43:03 pptp[614]: log[decaps_hdlc:pptp_gre.c:129]: short read (4294967295): Input/output error
Jun 16 12:43:03 pptp[616]: log[callmgr_main:pptp_callmgr.c:246]: Closing connection
Jun 16 12:43:03 pptp[616]: log[pptp_conn_close:pptp_ctrl.c:307]: Closing PPTP connection
Jun 16 12:43:04 pppd[195]: Received bad configure-ack:
Jun 16 12:43:05 pptp[616]: log[call_callback:pptp_callmgr.c:89]: Closing connection

---

áåñïîêîèò ñòðî÷êà
Jun 16 12:43:01 pppd[195]: Received bad configure-ack
è íå ïîéìó ïî÷åìó ïîñëå ñìåíû ip-àäðåñà îáðûâàåòñÿ ñâÿçü? ãäå íåïîðÿäîê?

ðîóòåð, íàñêîëüêî ÿ ïîíÿë ïî ïîâòîðÿþùèìñÿ çàïèñÿì â ëîãå ïðîäîëæàåò ëîìèòüñÿ ê âïí, ñëåäóþùàÿ åãî ïîïûòêà çàêàí÷èâàåòñÿ ýòèì:

Quote:

---

Jun 16 12:51:26 pppd[801]: Starting link
Jun 16 12:51:27 pppd[801]: Serial connection established.
Jun 16 12:51:27 pppd[801]: Connect: ppp1 <--> /dev/pts/1
Jun 16 12:51:27 pptp[848]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
Jun 16 12:51:28 pptp[848]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 61312).
Jun 16 12:51:31 pppd[801]: Received bad configure-ack:
Jun 16 12:51:31 pppd[801]: Local IP address changed to 172.19.180.211
Jun 16 12:51:31 pppd[801]: Remote IP address changed to 172.16.10.1
Jun 16 12:51:34 pppd[801]: Received bad configure-ack:
Jun 16 12:51:37 pppd[801]: Received bad configure-ack:
Jun 16 12:51:40 pppd[801]: Received bad configure-ack:
Jun 16 12:51:43 pppd[801]: Received bad configure-ack:
Jun 16 12:51:46 pppd[801]: Received bad configure-ack:
Jun 16 12:51:49 pppd[801]: Received bad configure-ack:
Jun 16 12:51:52 pppd[801]: Received bad configure-ack:
Jun 16 12:51:55 pppd[801]: Received bad configure-ack:
Jun 16 12:51:58 pppd[801]: Received bad configure-ack:
Jun 16 12:52:01 pppd[801]: CCP: timeout sending Config-Requests

---

ïîñëå ñìåíû àäðåñà â ñòóïîð

íàðîä ðàçüÿñíèòå ïëç êóäà ÿ ïîòîïàë íå â òó ñòîðîíó, èáî ìîíîëîã â òîïèêå ïîëó÷àåòñÿ, íå èíà÷å. ÿ íå ïðîøó "âñå ìíå íàñòðîèòü", áóäó ðàçáèðàòüñÿ ñàì, îäíàêî ïðåæäå õîòåëîñü áû ïîíÿòü ÷òî ÿ íå òàê äåëàþ.

è â ñèëå âîïðîñ íàñ÷åò êàê çàñòàâèòü ðîóòåð çàïîìíèòü ìàðøðóòû

И так.
Вот история.
Прошили 700ge прошивкой "openwrt-wl700ge-2.4.trx"

Как можно вернуть заводскую прошивку?

Читал мануалы и т.д. везде пишут про эти прошивки...
"
http://wl700g.homelinux.net/drupal/f....4.2_flash.trx
http://wl700g.homelinux.net/drupal/f...gE_1.0.4.2.nas
" - сюда попасть и скачать не могу,так как сервер не доступен.

Может кто-нить помощь мне? у кого нить остались прошивки? как я понял... нужна прошивка с расширением ".trx"
Скиньте пожалуйста прошивку мне на почту Hellmaster@metronet.ru
Или подскажите где они лежат.
И если не сложно, дайте пожалуйста инструкцию, по востановлению точки Asus wl 700ge.

Спасибо заранее. С Уважением, Евгений.

òàê.. âáèë ðîóòû â ñâîé rc.local (íàäî ñêàçàòü ÷òî ïîñëå ïåðåçàãðóçêè ñîõðàíèëèñü, ÷òî óæå ãóò =))
äî ïåðåçàãðóçêè ïîêà ðîóòåð êîííåêòèëñÿ ÷-ç ñòàòè÷åñêèé ip, âñå áûëî îê

äàëåå âáèë WAN Connection Type as static ip ñ ñîîòâ. íàñòðîéêàìè, ðîóòåð ïîïðîñèë ðåáóòà
ïîñëå íåãî ñðàçó çàãëÿíóë â ðîóòû - ìàðøðóòû ñîõðàíèëèñü:

Code:

---

[root@wl700ge /]$ route
Kernel IP routing table
Destination    Gateway        Genmask        Flags Metric Ref    Use Iface
default        10.6.19.254    255.255.255.255 UGH  0      0        0 eth0
172.16.10.1    *              255.255.255.255 UH    0      0        0 ppp0
192.168.1.0    *              255.255.255.0  U    0      0        0 br0
194.44.186.0    10.6.19.254    255.255.255.0  UG    0      0        0 eth0
194.143.148.0  10.6.19.254    255.255.254.0  UG    0      0        0 eth0
91.193.172.0    10.6.19.254    255.255.252.0  UG    0      0        0 eth0
193.138.144.0  10.6.19.254    255.255.252.0  UG    0      0        0 eth0
10.6.16.0      *              255.255.252.0  U    0      0        0 eth0
93.95.184.0    10.6.19.254    255.255.248.0  UG    0      0        0 eth0
80.73.0.0      10.6.19.254    255.255.240.0  UG    0      0        0 eth0
239.0.0.0      10.6.16.143    255.0.0.0      UG    0      0        0 eth0
10.0.0.0        10.6.19.254    255.0.0.0      UG    0      0        0 eth0
default        172.16.10.1    0.0.0.0        UG    0      0        0 ppp0
[root@wl700ge /]$
[root@wl700ge /]$

---

äîáàâèëàñü ñòðî÷êà, âòîðàÿ ïî ñ÷åòó â ìàðøðóòàõ. àðåíäîâàííûé àäðåñ, áëèí

â ñèñòåì-ëîãå

Code:

---

Aug 12 23:40:21 pppd[198]: Using interface ppp0
Aug 12 23:40:21 pppd[198]: local  IP address 10.64.64.64
Aug 12 23:40:21 pppd[198]: remote IP address 10.112.112.112
Aug 12 23:40:25 pppd[198]: Starting link
Aug 12 23:40:25 pppd[198]: Serial connection established.
Aug 12 23:40:25 pppd[198]: Connect: ppp0 <--> /dev/pts/0
Aug 12 23:40:30 utelnetd[253]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Aug 12 23:40:45 pptp[207]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 12 23:40:45 pppd[198]: Modem hangup
Aug 12 23:40:45 pppd[198]: Connection terminated.
Aug 12 23:41:10 utelnetd[557]: utelnetd (port: 23, ifname: br0, login: /bin/login) startup succeeded
Aug 12 23:41:10 dropbear[562]: Running in background
Aug 12 23:41:17 pppd[198]: Starting link
Aug 12 23:41:17 pppd[198]: Serial connection established.
Aug 12 23:41:17 pppd[198]: Connect: ppp0 <--> /dev/pts/0
Aug 12 23:41:17 pptp[621]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
Aug 12 23:41:18 pptp[621]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 47896).
Aug 12 23:41:20 pppd[198]: Local IP address changed to 172.21.2.45
Aug 12 23:41:20 pppd[198]: Remote IP address changed to 172.16.10.1
Aug 12 23:41:25 ddns update: connected to members.dyndns.org (63.208.196.95) on port 80.
Aug 12 23:36:48 ddns update: authentication failure
Aug 12 23:38:01 dropbear[653]: Child connection from 192.168.1.2:4463
Aug 12 23:38:20 dropbear[653]: password auth succeeded for 'root' from 192.168.1.2:4463

---

èíåò çàðàáîòàë (äà åùå êàê çàðàáîòàë! íà ìîåì òî ìåòàëëîëîìå)))

íå ìîãó ïîíÿòü ÷òî ðîóòåð ïîïûòàëñÿ ìíå ñêàçàòü:

Code:

---

Aug 12 23:40:45 pptp[207]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 12 23:40:45 pppd[198]: Modem hangup
Aug 12 23:40:45 pppd[198]: Connection terminated.

---

êîâûðíóë íàñòðîéêè dyndns, ðîóòåð ñäåëàë ðåêîííåêò, ïîëó÷èëàñü áîäÿãà:

Code:

---

Aug 13 00:15:12 ddns update: error connecting to members.dyndns.org:80
Aug 13 00:15:19 pptp[882]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 13 00:15:19 pppd[869]: Modem hangup
Aug 13 00:15:19 pppd[869]: Connection terminated.
Aug 13 00:15:49 pppd[869]: Starting link
Aug 13 00:15:50 pppd[869]: Serial connection established.
Aug 13 00:15:50 pppd[869]: Connect: ppp1 <--> /dev/pts/0
Aug 13 00:16:10 pptp[1039]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 13 00:16:10 pppd[869]: Modem hangup
Aug 13 00:16:10 pppd[869]: Connection terminated.

---

êàê ÿ ïîíÿë ïîçæå, îí íå âåðíóëñÿ ê ïåðâîíà÷àëüíûì óñòàíîâêàì èï, ãåéò è ò.ï., ñîîòâåòñòâåííî àäðåñà îñòàëèñü "âðåìåííûå", çàöåïèòüñÿ îí òàê è íå ñìîã

ïîñëå ðåêîííåêòà âðó÷íóþ:

Code:

---

Aug 13 00:18:26 pppd[869]: Hangup (SIGHUP) (òóåâà õó÷à òàêèõ ñòðîê)
Aug 13 00:18:26 pppd[869]: Hangup (SIGHUP)
Aug 13 00:18:27 pppd[1201]: Using interface ppp0
Aug 13 00:18:27 pppd[1201]: local  IP address 10.64.64.64
Aug 13 00:18:27 pppd[1201]: remote IP address 10.112.112.112
Aug 13 00:18:28 pppd[1201]: Starting link
Aug 13 00:18:28 pppd[1201]: Serial connection established.
Aug 13 00:18:28 pppd[1201]: Connect: ppp0 <--> /dev/pts/0
Aug 13 00:18:48 pptp[1210]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 13 00:18:48 pppd[1201]: Modem hangup
Aug 13 00:18:48 pppd[1201]: Connection terminated.

---

òà æå õðåíü, âîáùåì

ðîóòîâ, êàê ïîâåäàë òåëíåò, íåòó:

Code:

---

[root@wl700ge /]$ route
Kernel IP routing table
Destination    Gateway        Genmask        Flags Metric Ref    Use Iface
10.112.112.113  *              255.255.255.255 UH    0      0        0 ppp1
192.168.1.0    *              255.255.255.0  U    0      0        0 br0
default        10.112.112.113  0.0.0.0        UG    0      0        0 ppp1

---

ïîñëå êóëüòóðíîãî ðåáóòà ðîóòåðà èç òåëíåòà êîìàíäîé reboot

Code:

---

Aug 13 00:22:41 pppd[198]: Using interface ppp0
Aug 13 00:22:41 pppd[198]: local  IP address 10.64.64.64
Aug 13 00:22:41 pppd[198]: remote IP address 10.112.112.112
Aug 13 00:22:45 pppd[198]: Starting link
Aug 13 00:22:46 pppd[198]: Serial connection established.
Aug 13 00:22:46 pppd[198]: Connect: ppp0 <--> /dev/pts/0
Aug 13 00:22:50 utelnetd[253]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Aug 13 00:23:06 pptp[205]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 13 00:23:06 pppd[198]: Modem hangup
Aug 13 00:23:06 pppd[198]: Connection terminated.
Aug 13 00:23:31 utelnetd[561]: utelnetd (port: 23, ifname: br0, login: /bin/login) startup succeeded
Aug 13 00:23:32 dropbear[568]: Running in background

---

íèõåðà ó íåãî òîëêîì íå ïîëó÷èëîñü, òåëíåò ïîòåðÿë ðàñêðàñêó è âàãîí êîìàíä, âåðíóëñÿ êîðî÷å â çàâîäñêîå ñîñòîÿíèå. ïàðîëåì íà ðóòà òîæå íå èíòåðåñîâàëñÿ. òâàðü...

â ïîëíîé íåïîíÿòêå, â âåá-ôåéñå çàáèë çàíîâî íàñòðîéêè ïïòï è ðåáóòíóë åãî, àâîñü ïîïðàâèòñÿ. è îí ñöóêî ïîïðàâèëñÿ:

Code:

---

Aug 13 00:58:32 pppd[198]: Using interface ppp0
Aug 13 00:58:32 pppd[198]: local  IP address 10.64.64.64
Aug 13 00:58:32 pppd[198]: remote IP address 10.112.112.112
Aug 13 00:58:37 pppd[198]: Starting link
Aug 13 00:58:37 pppd[198]: Serial connection established.
Aug 13 00:58:37 pppd[198]: Connect: ppp0 <--> /dev/pts/0
Aug 13 00:58:41 utelnetd[253]: utelnetd (port: 23, ifname: any, login: /bin/login) startup succeeded
Aug 13 00:58:57 pptp[207]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 13 00:58:57 pppd[198]: Modem hangup
Aug 13 00:58:57 pppd[198]: Connection terminated.
Aug 13 00:59:21 utelnetd[557]: utelnetd (port: 23, ifname: br0, login: /bin/login) startup succeeded
Aug 13 00:59:21 dropbear[563]: Running in background
Aug 13 00:59:26 utelnetd: connection from: 192.168.1.2
Aug 13 00:59:28 pppd[198]: Starting link
Aug 13 00:59:28 pppd[198]: Serial connection established.
Aug 13 00:59:28 pppd[198]: Connect: ppp0 <--> /dev/pts/1
Aug 13 00:59:29 pptp[618]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:580]: Client connection established.
Aug 13 00:59:30 pptp[618]: log[pptp_dispatch_ctrl_packet:pptp_ctrl.c:707]: Outgoing call established (call ID 0, peer's call ID 40829).
Aug 13 00:59:32 pppd[198]: Local IP address changed to 172.22.4.101
Aug 13 00:59:32 pppd[198]: Remote IP address changed to 172.16.10.1
Aug 13 00:59:33 ddns update: connected to members.dyndns.org (63.208.196.95) on port 80.
Aug 13 00:59:33 ddns update: request successful
Aug 13 00:59:36 login[612]: root login  on `pts/0'
Aug 13 00:59:36 ddns: ddns update ok

---

äàæå çàöåïèëñÿ ñàìîñòîÿòåëüíî ê dyndns.org, îäíàêî íåïîíÿòàÿ ðàíåå êàêà êàê îñòàëàñü:

Code:

---

Aug 13 00:58:57 pptp[207]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 13 00:58:57 pppd[198]: Modem hangup
Aug 13 00:58:57 pppd[198]: Connection terminated

---

êòî áû îáüÿíèë ÷òî ñèå çíà÷èò..

åùå îäèí ìîìåíò: ifconfig âûäàë â ÷èñëå ïðî÷åãî:

Code:

---

eth1      Link encap:Ethernet  HWaddr 00:1D:60:34:EB:0A
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:118
          TX packets:0 errors:86 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:2 Base address:0x2000

---

îñîáåííî èíòåðåñíî ÷òî çà TX packets:0 errors:86 ??

òåì íå ìåíåå, íå ñìîòðÿ íà òàêóþ ìåëêóþ ïîáåäó, ëîêàëêà òàê è íå ïîäíÿëàñü, ïîêà âî âñÿêîì ñëó÷àå. ÿ òàê ïîíÿë, ãäå-òî êîñÿ÷èíà ñ ìàðøðóòàìè(?)

íåáîëüøîå ðåçþìå:

1. ÷òî çíà÷èò:

Code:

---

Aug 12 23:40:45 pptp[207]: fatal[get_ip_address:pptp.c:314]: gethostbyname: name server error
Aug 12 23:40:45 pppd[198]: Modem hangup
Aug 12 23:40:45 pppd[198]: Connection terminated.

---

2. ðåêîííåêò, êàê ÿ ïîíÿë ðîóòåð óâîäèò â ñòóïîð

3. ÷òî çà îøèáêè â eth1: TX packets:0 errors:86

4. è ðàçáîðàòüñÿ áû ãäå áåäà ñ ìàðøðóòàìè ÷òîáû çàñòàâèòü âñå-òàêè ðàáîòàòü ëîêàëêó

ïåðâîìó îòâåòèâøåìó êàøàëàäêà è, âîçìîæíî, êåïêà :D

Quote:

---

Originally Posted by korotetsky

ïåðâîìó îòâåòèâøåìó êàøàëàäêà è, âîçìîæíî, êåïêà :D

---

À êåïêà ñ íàäïèñüþ "îò øàíòàéùèêà øàíòàéùèêó ñ íàèëó÷øèìè ïîæåëàíèÿìè îò ÀÑÓÑü"=)

ìîæ íàéäåòå òå êòî ôëåøêó Âàì ïåðåïîÿåò è çàëüåòå Îëåãîâó ïðîøèâêó ?

î! íà êåïêó êëåâ ïîøåë :D

ÿ áû è ðàä, äà íå ìîãó íàéòè êòî ïåðåïàÿåò ÷åðòîâó ôëåøêó â óêðàèíå, ÿ óæå íå ãîâîðþ ïðî õàðüêîâ. òåì áîëåå, ÷òî íàéòè "ïðàâèëüíóþ" ôëåøêó òîæå íå òàê ëåãêî. à çäåñü òàêèå ðåêâåñòû ñ÷èòàþòñÿ ÷åì-òî áðóòàëüíûì ))

ïðîäîëæèì ìîíîëîã..

ïîõîæå, ïðè ñîåäèíåíèè ñ âïí-ñåðâåðîì ñòàíîâèòñÿ íåäîñòóïíûì øëþç ëîêàëüíîé ñåòè 10.6.19.254. îí è ñ ðîóòåðà íå ïèíãóåòñÿ íèôèãà

êàê áûòü â òàêîì ñëó÷àå?




updated:
ñîððè, áûë óâåðåí ÷òî øëþç íå îòâå÷àåò, îäíàêî îí âñå-òàêè îòçûâàåòñÿ, õîòÿ ñêâîçü íåãî íè÷åãî èäòè íå õî÷åò. ãäå îøèáêà â ìàðøðóòàõ?

Quote:

---

Originally Posted by altime

Ïðè ñîçäàíèè îäíîãî ðàçäåëà íà ðîäíîì âíóòðåííåì HDD è ïîïûòêå ïðîøèâêè ñ âíåøíåé êîíñîëè âûäàåòñÿ îøèáêà: Error 10054 (ïðîøèâêà íå ïðèíèìàåòñÿ).Åñëè íà äèñêå ñîçäàòü áîëåå îäíîãî ðàçäåëà,ïðîøèâêà âûïîëíÿåòñÿ íîðìàëüíî, íî ïðè âõîäå ÷åðåç web èíòåðôåéñ Disk management ïîêàçûâàåò ñòàòóñ äèñêà Unmounted "êðàñíûé". Åñòåñòâåííî,äîñòóïà ê Download Master,Browse Share è Personal Webpage -íåò. Òàê æå íåò äîñòóïà ê íàñòðîéêàì Applications.
Ïîäãîòîâêà äèñêà è ïåðåïðîøèâêà äåëàëèñü ïî èíñòðóêöèÿì ASUS.Bepcèè ïðîøèâîê ïðîáîâàëèñü ðàçíûå(îðèãèíàëüíûå),íî ðåçóëüòàò íåèçìåííî áûë òîò æå. Ìîæåò áûòü êòî-íèáóäü óæå ñòàëêèâàëñÿ ñ ïîäîáíîé ïðîáëåìîé.Áóäó ïðèçíàòåëåí çà ëþáóþ ïîìîùü.

---

ó ìåíÿ ñðàáîòàëà!!!!

ïî ñîâåòó nos96 òóò, çà ÷òî åìó ðåêñïåêò, âáèë:

Code:

---

iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o eth0 -j SNAT --to 10.6.16.143

---

äîñòóï ê ñåòêå ïîÿâèëñÿ, ÷òî óæå ìåãà-ãóò ). äîáàâèë ýòó ñòðî÷êó â rc.local, îäíàîê ïîñëå ðåáóòà îíà íå áûëà âûïîëíåíà. õîòåëîñü áû çíàòü ïî÷åìó

ïëþñ êî âñåìó îòâàëèëñÿ äæàááåð äà dc-êëèåíò, äëÿ êîòîðîãî ïðîáðàñûâàëèñü ïîðòû íå çàðàáîòàë.

Ïîòðàòèë ïî÷òè âåñü äåíü è âîò ÷òî ó ìåíÿ ïîëó÷èëîñü, ïðàâäà ó ìåíÿ PPPoE, íî ÿ äóìàþ ðåøåíèå ïðîáëåìû àíàëîãè÷íî:
Çàøåë íà asus wl-700gE ÷åðåç ssh â êà÷åñòâå root âûïîëíèâ:
ifconfig eth0 172.20.8.4 netmask 255.255.0.0 broadcast 172.20.255.255
ïîëó÷èë ïîä èíòåðôåéñ ñî ñòàòè÷åñêèì ip 172.20.8.4, íî ýòî íå êîððåêòíî ïîòìó ÷òî â ëîêàëêêå ip ðàçäàþñòÿ DHCP ñåðâåðîì ïðîâàéäåðà
Íó è ïðîïèñàâ åù¸ îäíî ïðàâèëî â iptables
iptables -I POSTROUTING -t nat -o eth0 -d 172.20.0.0/16 -j MASQUERADE
ó ìåíÿ íàêîíåö òî çàðàáîòàë Netlook è îòñêàíèðîâàë ëîêàëêó!!!!

À òåïåðü âîïðîñ ê çíàòîêàì êàê íàó÷èòü ýòó êîðîáî÷êó ïîëó÷àòü ip àäðåññà ÷åðåç DHCP ?

Quote:

---

Originally Posted by korotetsky

ïî ñîâåòó nos96 òóò, çà ÷òî åìó ðåêñïåêò, âáèë:

Code:

---

iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o eth0 -j SNAT --to 10.6.16.143

---

äîñòóï ê ñåòêå ïîÿâèëñÿ, ÷òî óæå ìåãà-ãóò ). äîáàâèë ýòó ñòðî÷êó â rc.local, îäíàîê ïîñëå ðåáóòà îíà íå áûëà âûïîëíåíà. õîòåëîñü áû çíàòü ïî÷åìó
ïëþñ êî âñåìó îòâàëèëñÿ äæàááåð äà dc-êëèåíò, äëÿ êîòîðîãî ïðîáðàñûâàëèñü ïîðòû íå çàðàáîòàë.

---

ïîðòû, ïðîáðîøåíûå ÷-ç âåá-ìîðäó ïðîáðàñûâàþòñÿ äëÿ ððð-ñîåäèíåíèÿ, ñëåäîâàòåëüíî, äëÿ eth0 íå ðàáîòàþò. ïîñåìó â rc.local äîáàâèë òàêóþ çàïèñü:

Code:

---

iptables -A FORWARD -p tcp -m tcp -i eth0 -d 192.168.1.2 --dport 16002  -j ACCEPT
iptables -A FORWARD -p udp -m udp -i eth0 -d 192.168.1.2 --dport 16002  -j ACCEPT

iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 16002 -j DNAT --to-destination 192.168.1.2
iptables -t nat -A PREROUTING -p udp -i eth0 --dport 16002 -j DNAT --to-destination 192.168.1.2

---

192.168.1.2 - àäðåñ êîìïà, íà êîòîðîì òðóäèòñÿ dc-êëèåíò
16002 - udp è tcp ïîðòû ÷òîáû ïðîïóñêàëî âíóòðü

Õî÷ó ïîñòàâèòü TwonkyMedia íà WL-700.
Ïðè ïîïûòêå çàïóñêà âûñêàêèâàåò òàêàÿ îøèáêà:

[root@WL700gE Twonkyvision]$ ./twonkymedia
./twonkymedia: /opt/lib/libpthread.so.0: no version information available (required by ./twonkymedia)
Segmentation fault

Ïîäñêàæèòå pls, êàê ýòî ìîæíî èñïðàâèòü ?

Óñòàíîâèë íà wl-700 rrdtool.
Ïûòàþñü çàïóñòèòü ýòîò ñêðèïò

Code:

---

#!/bin/sh
#
# macsat RRDTool script for ASUS WL-500g (Deluxe) v1.1 (18-07-2005)
#
# (c) 2005 by macsat@macsat.com
# Feel free to distribute and improve :-)
#
#

# Configuration Start

# Directory for storing RRD Databases
RRDDATA=/opt/var/lib/rrd/

# Directory for storing webpages / images
RRDIMG=/opt/share/www/rrd/


# Configuration End

#Output date for log...
date

if [ ! -d "${RRDDATA}" ]
        then
                echo "RRD Database dir: $RRDDATA does not exist...Creating Now...."
                mkdir -p "${RRDDATA}"
fi

if [ ! -d "${RRDIMG}" ]
        then
                echo "RRD Image / web dir: $RRDIMG does not exist....Creating Now...."
                mkdir -p "${RRDIMG}"
fi


# $1 = html file $2 = Period
CreateHTML ()
{
echo "<HTML><HEAD><TITLE>macsat.com demo RRDTool Traffic Graph Page </TITLE></HEAD><BODY> <h3>Traffic Graphs - ${2} </h3>" > "${1}"
echo "<center><a href='index.html'>Daily Graphs</a> | <a href='week.html'> Weekly Graphs </a> | <a href='month.html'> Monthly Graphs </a> | <a href='year.html'> Yearly Graph </a>" >> "${1}"
echo "<br><br><img src='wan${2}.png'><br><img src='lan${2}.png'><br><img src='wlan${2}.png'><br></CENTER></BODY></HTML>" >> "${1}"

echo "Create started..."

}


if [ ! -f "${RRDIMG}/index.html" ]
        then
                echo " index.html does not exist.....Creating Now...."
                CreateHTML "${RRDIMG}/index.html" day
fi


if [ ! -f "${RRDIMG}/week.html" ]
        then
                echo " week.html does not exist.....Creating Now...."
                CreateHTML "${RRDIMG}/week.html" week
fi

if [ ! -f "${RRDIMG}/month.html" ]
        then
                echo " month.html does not exist.....Creating Now...."
                CreateHTML "${RRDIMG}/month.html" month
fi

if [ ! -f "${RRDIMG}/year.html" ]
        then
                echo " year.html does not exist.....Creating Now...."
                CreateHTML "${RRDIMG}/year.html" year
fi




WANIF=`nvram get wan_ifname`
LANIF=`nvram get lan_ifnames | awk '{print $1}'`
WLANIF=`nvram get wl0_ifname`


#debug lines
echo "WAN Interface: ${WANIF}"
echo "LAN Interface: ${LANIF}"
echo "WLAN Interface: ${WLANIF}"


WANRRD="${RRDDATA}/${WANIF}.rrd"
LANRRD="${RRDDATA}/${LANIF}.rrd"
WLANRRD="${RRDDATA}/${WLANIF}.rrd"


CreateRRD ()
{       
        rrdtool create "${1}" \
        DS:in:DERIVE:600:0:12500000 \
        DS:out:DERIVE:600:0:12500000 \
        RRA:AVERAGE:0.5:1:576 \
        RRA:AVERAGE:0.5:6:672 \
        RRA:AVERAGE:0.5:24:732 \
        RRA:AVERAGE:0.5:144:1460
}


if [ ! -f "${WANRRD}" ]
        then
                echo "RRD file : ${WANRRD} does not exist...Creating Now..."
                CreateRRD "${WANRRD}"
fi

if [ ! -f "${LANRRD}" ]
        then
                echo "RRD file : ${LANRRD} does not exist...Creating Now..."
                CreateRRD "${LANRRD}"
fi

if [ ! -f "${WLANRRD}" ]
        then
                echo "RRD file : ${WLANRRD} does not exist...Creating Now..."
                CreateRRD "${WLANRRD}"
fi

WANIN=`ifconfig "${WANIF}" |grep bytes|awk -F ":" '{print $2}'|awk '{print $1}'`
WANOUT=`ifconfig "${WANIF}" |grep bytes|awk -F ":" '{print $3}'|awk '{print $1}'`
LANIN=`ifconfig "${LANIF}" |grep bytes|awk -F ":" '{print $2}'|awk '{print $1}'`
LANOUT=`ifconfig "${LANIF}" |grep bytes|awk -F ":" '{print $3}'|awk '{print $1}'`
WLANIN=`ifconfig "${WLANIF}" |grep bytes|awk -F ":" '{print $2}'|awk '{print $1}'`
WLANOUT=`ifconfig "${WLANIF}" |grep bytes|awk -F ":" '{print $3}'|awk '{print $1}'`

# Debug
echo "WAN -> in: ${WANIN}  out: ${WANOUT} "
echo "LAN -> in: ${LANIN}  out: ${LANOUT}"
echo "WLAN -> in: ${WLANIN}  out: ${WLANOUT}"

# Update the Databases
`rrdupdate "${WANRRD}" -t in:out N:"${WANIN}":"${WANOUT}"`
`rrdupdate "${LANRRD}" -t in:out N:"${LANIN}":"${LANOUT}"`
`rrdupdate "${WLANRRD}" -t in:out N:"${WLANIN}":"${WLANOUT}"`

# $1 = ImageFile , $2 = Time in secs to go back , $3 = RRDfil , $4 = GraphText
CreateGraph ()
{
  rrdtool graph "${1}.new" -a PNG -s -"${2}" -w 550 -h 240 -v "bytes/s" \
  'DEF:ds1='${3}':in:AVERAGE' \
  'DEF:ds2='${3}':out:AVERAGE' \
  'LINE1:ds1#00FF00:Incoming Traffic' \
  GPRINT:ds1:MAX:"Max %6.2lf %s" \
  GPRINT:ds1:MIN:"Min %6.2lf %s" \
  GPRINT:ds1:AVERAGE:"Avg %6.2lf %s" \
  GPRINT:ds1:LAST:"Curr %6.2lf %s\n" \
  'LINE1:ds2#0000FF:Outgoing Traffic' \
  GPRINT:ds2:MAX:"Max %6.2lf %s" \
  GPRINT:ds2:MIN:"Min %6.2lf %s" \
  GPRINT:ds2:AVERAGE:"Avg %6.2lf %s" \
  GPRINT:ds2:LAST:"Curr %6.2lf %s" \
  -t "${4}"
  mv -f "${1}.new" "${1}"
}

# Set time-variables
MTIME=`date "+%M"`
HTIME=`date "+%H"`

# Update Daily graphs every 10 mins
if [ "${MTIME}" = 00 ] || [ "${MTIME}" = 10 ] || [ "${MTIME}" = 20 ] || [ "${MTIME}" = 30 ] || [ "${MTIME}" = 40 ] || [ "${MTIME}" = 50 ];
then
# 1 Day Graph
echo "Daily Graphs created....."
CreateGraph "${RRDIMG}/wanday.png" 86400 "${WANRRD}" WAN
CreateGraph "${RRDIMG}/landay.png" 86400 "${LANRRD}" LAN
CreateGraph "${RRDIMG}/wlanday.png" 86400 "${WLANRRD}" WLAN
fi

# Update Weekly graph once an hour
if [ "${MTIME}" = 00 ];
then
# 1 Week Graph
echo "Weekly Graphs created....."
CreateGraph "${RRDIMG}/wanweek.png" 604800 "${WANRRD}" WAN
CreateGraph "${RRDIMG}/lanweek.png" 604800 "${LANRRD}" LAN
CreateGraph "${RRDIMG}/wlanweek.png" 604800 "${WLANRRD}" WLAN
fi

# Update  Monthly and Yearly graphs once a day (maby twice a day on 12h settings)
if [ "${HTIME}" = 04 ] && [ "${MTIME}" = 15 ];
then
# 1 Month Graph
echo "Monthly Graphs Created...."
CreateGraph "${RRDIMG}/wanmonth.png" 2678400 "${WANRRD}" WAN
CreateGraph "${RRDIMG}/lanmonth.png" 2678400 "${LANRRD}" LAN
CreateGraph "${RRDIMG}/wlanmonth.png" 2678400 "${WLANRRD}" WLAN
# 1 Year Graph
echo "Yearly Graphs Created...."
CreateGraph "${RRDIMG}/wanyear.png" 31536000 "${WANRRD}" WAN
CreateGraph "${RRDIMG}/lanyear.png" 31536000 "${LANRRD}" LAN
CreateGraph "${RRDIMG}/wlanyear.png" 31536000 "${WLANRRD}" WLAN
fi


echo " <------------------------------------------------------------->"
echo " "

---

Äèðåêòîðèè äëÿ õðàíåíèÿ êàòðèíîê ñ ãðàôèêàìè è äëÿ .rrd ôàéëîâ ýòîò ñêðèïò ñîçäàë.
È âñå... Â ëîã ôàéëå rrdtool òîëüêî òàêèå ñîîáùåíèÿ

Sat Sep 6 10:07:53 UTC 2008
RRD Database dir: /opt/var/lib/rrd/ does not exist...Creating Now....
RRD Image / web dir: /opt/share/www/rrd/ does not exist....Creating Now....
syntax error
Sat Sep 6 10:07:56 UTC 2008
syntax error
Sat Sep 6 10:07:58 UTC 2008
syntax error
Sat Sep 6 10:10:39 UTC 2008
syntax error

×òî íå íðàâèëñÿ ýòîìó ñêðèïòó ? :confused:
Ïîìîãèòå pls...

Quote:

---

Originally Posted by FastCat

Óñòàíîâèë íà wl-700 rrdtool.
Ïûòàþñü çàïóñòèòü ýòîò ñêðèïò

Äèðåêòîðèè äëÿ õðàíåíèÿ êàòðèíîê ñ ãðàôèêàìè è äëÿ .rrd ôàéëîâ ýòîò ñêðèïò ñîçäàë.
È âñå... Â ëîã ôàéëå rrdtool òîëüêî òàêèå ñîîáùåíèÿ

Sat Sep 6 10:07:53 UTC 2008
RRD Database dir: /opt/var/lib/rrd/ does not exist...Creating Now....
RRD Image / web dir: /opt/share/www/rrd/ does not exist....Creating Now....
syntax error
Sat Sep 6 10:07:56 UTC 2008
syntax error
Sat Sep 6 10:07:58 UTC 2008
syntax error
Sat Sep 6 10:10:39 UTC 2008
syntax error

×òî íå íðàâèëñÿ ýòîìó ñêðèïòó ? :confused:
Ïîìîãèòå pls...

---

â òåìå ïî íàñòðîéêå ñ íóëÿ åñòü îïèñàíèå è ññûëêè. â òîì ÷èñëå òóò êòî-òî ïåðåâîäèë óêàçàííûå â òîé òåìå ññûëêè íà ðóññêèé.

1. ÍÅÎÁÕÎÄÈÎÌÅ óñëîâèå - íàëè÷èå óñòàíîâëåííîãî php ñåðâåðà
2. ÍÅÎÁÕÎÄÈÌÀ óñòàíîâêà ïëàíèðîâùèêà Cron
3. ïîòîìó ÷òî óêàçàííûé âàìè ñêðèïò íàäî çàïóñêàòü ÊÀÆÄÛÅ 5 ÌÈÍ êàê ìèíèìóì!

Quote:

---

Originally Posted by AndreyPopov

â òåìå ïî íàñòðîéêå ñ íóëÿ åñòü îïèñàíèå è ññûëêè. â òîì ÷èñëå òóò êòî-òî ïåðåâîäèë óêàçàííûå â òîé òåìå ññûëêè íà ðóññêèé.

1. ÍÅÎÁÕÎÄÈÎÌÅ óñëîâèå - íàëè÷èå óñòàíîâëåííîãî php ñåðâåðà
2. ÍÅÎÁÕÎÄÈÌÀ óñòàíîâêà ïëàíèðîâùèêà Cron
3. ïîòîìó ÷òî óêàçàííûé âàìè ñêðèïò íàäî çàïóñêàòü ÊÀÆÄÛÅ 5 ÌÈÍ êàê ìèíèìóì!

---

Èíñòðóêöèè ÿ ÷èòàòü óìåþ :)
Ñåðâåð lighttpd è php óñòàíîâëåíû è ðàáîòàþò.
À cron íà ýòàïå íàñòðîéêè íàôèê íå íóæåí. Ò.ê. ÿ ýòîò ñêðèïò ðóêàìè ìîãó íåñêîëüêî ðàç çàïóñòèòü.
Ñîáñòâåííî, ìîé âîïðîñ îñòàåòñÿ âñå åùå â ñèëå...

Ïðîáëåìà íà÷àëà ïîíåìíîãó ðåøàòüñÿ.
Äëÿ íà÷àëà, ÷òî áû ñêðèïò (ñì. ìîå ïåðâîå ñîîáùåíèå) õîòü êàê òî íà÷àë ðàáîòàòü íà wl-700g. Åãî ïåðâóþ ñòðîêó íàäî èçìåíèòü íà

Code:

---

#!/opt/bin/sh

---

Åùå ðàç ïðîáóåì çàïóñòèòü ñêðèïò.

Code:

---

[root@WL700gE bin]$ ./rrdtool.sh
Sun Sep  7 19:27:01 UTC 2008
RRD Database dir: /opt/share/www/lighttpd/rrd/ does not exist...Creating Now....
 index.html does not exist.....Creating Now....
Create started...
 week.html does not exist.....Creating Now....
Create started...
 month.html does not exist.....Creating Now....
Create started...
 year.html does not exist.....Creating Now....
Create started...
WAN Interface: eth0
LAN Interface: vlan0
WLAN Interface: eth1
RRD file : /opt/share/www/lighttpd/rrd//eth0.rrd does not exist...Creating Now...

---

Äèðåêòîðèþ rrd îí ñîçäàë è .html ôàéëû òîæå ñîçäàë. À âîò ñàìè ôàéëû .rrd è êàðòèíêè îí ñîçäàâàòü íå õî÷åò. Ñêðèïò îñòàåòñÿ "âèñåòü" (ïîêà åãî íàñèëüíî íå ïðåðâàòü) ñ ñîîáùåíèåì, êîòîðîå "æèðíûì" âûäåëåíî (â ëîãàõ rrdtool íè÷åãî íåò).

×òî èíòåðåñíî. Êîìàíäà âèäà:

Code:

---

rrdtool create load.rrd DS:sysload:GAUGE:600:U:U RRA:AVERAGE:0.5:1:48

---

âûïîëíÿåòñÿ ïðåêðàñíî. rrd ôàéë ñîçäàåòñÿ.

Îòñþäà ìîæíî ñäåëàòü âûâîä, ÷òî ñ ïðîãðàììíîé íàñòðîéêîé ìîåãî wl-700 âñå õîðîøî. À ïðîáëåìà â ñàìîì ñêðèïòå.

Ïîìîãèòå pls àäàïòèðîâàòü äàííûé ñêðèïò ïîä wl-700 :rolleyes:

Quote:

---

Originally Posted by FastCat

Code:

---

RRD file : /opt/share/www/lighttpd/rrd//eth0.rrd does not exist...Creating Now...

---

---

Åñëè âíèìàòåëüíî ãëÿíóòü íà äàííóþ ñòðî÷êó, òÿæåëî íå çàìåòèòü "//", ÷òî ñîâåðøåííî íåäîïóñòèìî. Óáåðèòå â ïóòè êîíå÷íûé ñëåø è âñå çàðàáîòàåò.

Óáðàë îäèí ëèøíèé "/" â ñêðèïòå

Code:

---

[root@WL700gE bin]$ ./rrdtool.sh
Sun Sep  7 20:09:29 UTC 2008
RRD Database dir: /opt/share/www/lighttpd/rrd does not exist...Creating Now....
 index.html does not exist.....Creating Now....
Create started...
 week.html does not exist.....Creating Now....
Create started...
 month.html does not exist.....Creating Now....
Create started...
 year.html does not exist.....Creating Now....
Create started...
WAN Interface: eth0
LAN Interface: vlan0
WLAN Interface: eth1
RRD file : /opt/share/www/lighttpd/rrd/eth0.rrd does not exist...Creating Now...

---

è íè÷åãî íå èçìåíèëîñü... :(

Òåì áîëåå â ïðîöåññå ðàáîòû ñêðèïòà ýòî

Code:

---

WAN Interface: vlan1
LAN Interface: vlan0
WLAN Interface: eth1
WAN -> in: 2057306 out: 737424
LAN -> in: 0 out: 294284
WLAN -> in: 0 out: 0

---

îòîáðàæàåòñÿ. Îäíàêî ó ìåíÿ "âûäåëåííîå" ñîâñåì íå îòîáðàæàåòñÿ...

ÿ áû ñ ðàäîñòüþ ïî÷èòàë ðóêîâîäñòâî ïî óñòàíîâêå òâîíêèìåäèà íà wl500:)

Quote:

---

Originally Posted by Flitzen

ÿ áû ñ ðàäîñòüþ ïî÷èòàë ðóêîâîäñòâî ïî óñòàíîâêå òâîíêèìåäèà íà wl500:)

---

twonkymedia íà wl-500 ñòàâèòñÿ ëåãêî. Íà ýòîì ôîðóìå èíñòðóêöèè åñòü.
À âîò ÷òî áû íà wl-700 ïîñòàâèòü. Íóæíî ïîìó÷àòüñÿ. Íî âñå æå îíî è íà wl-700 ðàáîòàåò :)

Ñîáñòâåíí êóïèë ñàáæ, ïîïîëüçîâàëñÿ 2 ìåñÿöà, áûë î÷åíü ðàä åìó,îñîáåííî ïîñëå trendnet,íî áóêâàëüíî íà ïðoøëîé íåäåëå, ÿ ñëó÷àéíî åãî óðàíèë ñ âûñîòû ãäå-òî 1-1.5 ìåòðà,è èñïîðòèë æ¸ñòêèé äèñê è âèäèìî ñàì ðîóòåð, õàðä ñòîÿë ïðè ïîêóïêå 250ãá è íà êîðîáî÷êå íàïèñàíî 250ãá,ïîêóïàë ÷åðåç äðóãà òàê ÷òî íå î êàêîé ãàðàíòèè ðå÷ü èäòè íå ìîæåò,òàê êàê âçÿë çà 2000ðóáëåé, ÎÍ ÍÎÂÛÉ,ÍÅ Á/Ó.
òàê âîò ïðèø¸ë ÿ âîäèí íå áåçèçâåñòíûé ó ñåáÿ íà ðàéîíå êîìï.öåíòð áóä¸íîâñêèé ã.Ìîñêâà, ïðèø¸ë ê äðóãó ïîïðîñèë æ¸ñòêèé äèñê, âçÿë íà 10ãá-òàê êàê çà áîëüøèé îáú¸ì íàäî ïëàòèòü,à òàê äîñòàëîñü íà õàëÿâó, ïîñòàâèë, è ê ìîåìó óäèâëåíèþ íè÷åãî íå ïðîèçîøëî,

Åñëè íå ïîäêëþ÷àòü ñåòåîé ïðîâîä ïî êàáåëþ ãîðèò òîëüêî îäíà êíîïî÷êà çàïóñêà, wi-fi âîîáùå íå ðàáîòàåò,ïî êàáåëþ íå ïðîõîäèò èç-çà îøèáêè ïðèñâîåíèÿ ip àäðåññà êîìïüþòåðó(íå òîëüêî ìîåìó íî ÿ ïðîáûâàë ó äðóçåé íà ðàçíûõ ïëàòôîðìàõ),êíîïî÷êà reset íå ïîìàãàåò,ïðè íàæàòèå íà êíîïî÷êó âûêëþ÷åíèÿ è äàæå äåðæàíèÿ å¸ â òå÷åíèè 10 ñåêóíä ðîóòåð íå ïîäà¸ò ðåàêöèèé íà âûêëþ÷åíèå((Âîçìîæíî ëè êàê ëèáî åãî âîñòàíîâèòü æåëàòåëüíî ñâîèìè ðó÷êàìè, ïëàòó ïîñìîòðåë âðîäå íè÷åãî íè ãäå íå îòîøëî åñëè íàäî êèíó ôîòû ïëàòû,èëè ðîóòåð íà ïîîéêó?

Code:

---

WANIF=`nvram get wan_ifname`
LANIF=`nvram get lan_ifnames | awk '{print $1}'`
WLANIF=`nvram get wl0_ifname`


#debug lines
echo "WAN Interface: ${WANIF}"
echo "LAN Interface: ${LANIF}"
echo "WLAN Interface: ${WLANIF}"

---

ïðîâåðü îòäåëüíî ðàáîòàåò ëè ñ÷èòûâàíèå ïåðåìåííûõ èç ïàìÿòè.
ñîõðàíè â ñêðèïò
ñäåëàé åãî èñïîëíèìûì
è çàïóñòè.
åùå ÿ â ñâîèõ ñêðèïòàõ â íà÷àëå ïèøó òàê

Code:

---

#!/opt/bin/bash

---

ó ìåíÿ ïîñëåäíÿ ïðîøèâêà îò kfurge

âîò ïî÷èòàé åùå òåìó åñëè ïîíèìàåøü ïî àíãëèéñêè
700ge Partition Tables Question
Åñëè âêðàòöå òî ïåðåä óñòàíîâêîé íîâîãî äèñêà òàì ñîâåòóþò, ïîëíîñòüþ ñòåðåòü ïåðâûå 100 Ìá, çàáèâ èõ íóëÿìè âðîäå êàê, dd ýòî óòèëèòà ïîä ëèíóêñ.

âîò åùå òåìà, íà ðóññêîì
Íå ïîäêëþ÷àåòñÿ âíóòðåííèé HDD â WL-700gE

Quote:

---

Originally Posted by Kreks

Ñîáñòâåíí êóïèë ñàáæ, ïîïîëüçîâàëñÿ 2 ìåñÿöà, áûë î÷åíü ðàä åìó,îñîáåííî ïîñëå trendnet,íî áóêâàëüíî íà ïðoøëîé íåäåëå, ÿ ñëó÷àéíî åãî óðàíèë ñ âûñîòû ãäå-òî 1-1.5 ìåòðà,è èñïîðòèë æ¸ñòêèé äèñê è âèäèìî ñàì ðîóòåð, õàðä ñòîÿë ïðè ïîêóïêå 250ãá è íà êîðîáî÷êå íàïèñàíî 250ãá,ïîêóïàë ÷åðåç äðóãà òàê ÷òî íå î êàêîé ãàðàíòèè ðå÷ü èäòè íå ìîæåò,òàê êàê âçÿë çà 2000ðóáëåé, ÎÍ ÍÎÂÛÉ,ÍÅ Á/Ó.
òàê âîò ïðèø¸ë ÿ âîäèí íå áåçèçâåñòíûé ó ñåáÿ íà ðàéîíå êîìï.öåíòð áóä¸íîâñêèé ã.Ìîñêâà, ïðèø¸ë ê äðóãó ïîïðîñèë æ¸ñòêèé äèñê, âçÿë íà 10ãá-òàê êàê çà áîëüøèé îáú¸ì íàäî ïëàòèòü,à òàê äîñòàëîñü íà õàëÿâó, ïîñòàâèë, è ê ìîåìó óäèâëåíèþ íè÷åãî íå ïðîèçîøëî,

Åñëè íå ïîäêëþ÷àòü ñåòåîé ïðîâîä ïî êàáåëþ ãîðèò òîëüêî îäíà êíîïî÷êà çàïóñêà, wi-fi âîîáùå íå ðàáîòàåò,ïî êàáåëþ íå ïðîõîäèò èç-çà îøèáêè ïðèñâîåíèÿ ip àäðåññà êîìïüþòåðó(íå òîëüêî ìîåìó íî ÿ ïðîáûâàë ó äðóçåé íà ðàçíûõ ïëàòôîðìàõ),êíîïî÷êà reset íå ïîìàãàåò,ïðè íàæàòèå íà êíîïî÷êó âûêëþ÷åíèÿ è äàæå äåðæàíèÿ å¸ â òå÷åíèè 10 ñåêóíä ðîóòåð íå ïîäà¸ò ðåàêöèèé íà âûêëþ÷åíèå((Âîçìîæíî ëè êàê ëèáî åãî âîñòàíîâèòü æåëàòåëüíî ñâîèìè ðó÷êàìè, ïëàòó ïîñìîòðåë âðîäå íè÷åãî íè ãäå íå îòîøëî åñëè íàäî êèíó ôîòû ïëàòû,èëè ðîóòåð íà ïîîéêó?

---

Ïðîâåðèòü ñ ëóïîé, âîçìîæíî âñå-òàêè ïîâðåæäåíèÿ íà ïëàòå åñòü, íàïðèìåð ïðîö îòîøåë, èëè îòêîëîëñÿ. Ïîõîæå â ñåðâèñ íàäî, ëèáî â ïîìîéêó...

Quote:

---

Originally Posted by sonic

ïðîâåðü îòäåëüíî ðàáîòàåò ëè ñ÷èòûâàíèå ïåðåìåííûõ èç ïàìÿòè.
ñîõðàíè â ñêðèïò
ñäåëàé åãî èñïîëíèìûì
è çàïóñòè.

---

Îòâåò ñêðèïòà òàêîé:
WAN Interface: eth0
LAN Interface: vlan0
WLAN Interface: eth1
è âñå...

Quote:

---

åùå ÿ â ñâîèõ ñêðèïòàõ â íà÷àëå ïèøó òàê

Code:

---

#!/opt/bin/bash

---

---

Ðåçóëüòàò âñå òîò æå.

Quote:

---

ó ìåíÿ ïîñëåäíÿ ïðîøèâêà îò kfurge

---

Àíàëîãè÷íî.

Ñäàåòñÿ ìíå, ÷òî âñå äåëî â ñêðèïòå. Êîòîðûé èçíà÷àëüíî ïîä wl-500 ïèñàëñÿ. À wl-700 äðóãîé. Ïî êðåéíåé ìåðå â íåì lan èíòåðôåéñîâ áîëüøå. È ñêîðåå âñåãî ñíÿòèå ñòàòèñòèêè ñ åãî èíòåðôåéñîâ ïðîèñõîäèò ïî äðóãîìó.

Õîòÿ ó ìåíÿ WL500Gp V1.
ß êàê-òî òîæå äîëãî ìó÷àëñÿ, íî ïîòîì èçó÷èâ ñêðèïò, çàìåòèë ÷òî ðèñîâàíèå êàðòèíîê ïðîèñõîäèò â çàâèñèìîñòè îò ÷àñîâ è ìèíóò (â ñàìîì íèçó ñêðèïòà). Ïîïðîáóéòå çàêîìåíòèðîâàòü óñëîâèå ïðîâåðêè âðåìåíè. Âîò ìîé ñêðèïò, íåïîìíþ óæå êòî ïîäåëèëñÿ, îí äàæå ãðàôèêè çàãðóçêè ïðîöåññîðà è ñâîïà ðèñóåò. À ïîïðîáóéòå Vnstat, ó ìíÿ ñòîèò è òî è äðóãîå, îí ïðîöåññîð ïî÷òè íå ãðóçèò â îòëè÷èè îò rrdtool.

Çäðàâñòâóéòå!

 íàñòîÿùèé ìîìåíò èñïîëüçóåòñÿ "çàâîäñêîé" 3,5' IDE Western Digital 250 Gb.
Èìåþ æåëàíèå çàìåíèòü HDD äëÿ óâåëè÷åíèÿ åìêîñòè (750, à ëó÷øå 1000 Gb, íî áîþñü, ÷òî ðîóòåð åãî íå ïîéìåò).
Ìîæåò ëè êòî-íèáóäü ïîðåêîìåíäîâàòü - íà êàêóþ ìàêñèìàëüíóþ åìêîñòü äèñêà ÿ ìîãó ðàññ÷èòûâàòü è êàêóþ ëó÷øå ìîäåëü äèñêà èñïîëüçîâàòü?

Ñïàñèáî.