ADOS - zamiennik Download Mastera (wersja PL)

Printable View

Show 40 post(s) from this thread on one page

22-11-2009, 12:06
tigers7

Quote:

Originally Posted by proximus323

Hej mam problem
Wszytko siê raczej zainstalowa³o dobrze program dzia³a strona tez wget zosta³ znaleziony i wszystko wygl±da Ok ale pliki sie nie sciagaja. Mozna dodaæ plik do kolejki jest pokazana jego wielko¶æ ale nic dalej nie leci i status jest Download :(

Mia³ kto¶ podobny przypadek ??

Do³±czam siê te¿ mam ten problem, kiedy¶ po zwiêkszeniu limitu przestrzeni na dysku pomog³o, ale teraz ju¿ nic nie pomaga.
08-02-2010, 17:07
adek24

wie ktos o co chodzi z takim komunikatem robilem wszystko wg poradnika ale serwer nie startuje

Code:

Starting web server: lighttpd Duplicate config variable in conditional 0 global: fastcgi.server 2010-02-08 16:54:33: (configfile.c.907) source: cat /opt/etc/lighttpd/conf.d/*.conf line: 15 pos: 1 parser failed somehow near here: (EOL) 2010-02-08 16:54:33: (configfile.c.907) source: /opt/etc/lighttpd/lighttpd.conf line: 338 pos: 1 parser failed somehow near here: (EOL)

ok juz mam :)
ale mam pytanie jak dostac sie do opt zeby wgrac ADOS?
08-02-2010, 19:24
Lesiuk

Quote:

Originally Posted by adek24

wie ktos o co chodzi z takim komunikatem robilem wszystko wg poradnika ale serwer nie startuje

Code:

Starting web server: lighttpd Duplicate config variable in conditional 0 global: fastcgi.server 2010-02-08 16:54:33: (configfile.c.907) source: cat /opt/etc/lighttpd/conf.d/*.conf line: 15 pos: 1 parser failed somehow near here: (EOL) 2010-02-08 16:54:33: (configfile.c.907) source: /opt/etc/lighttpd/lighttpd.conf line: 338 pos: 1 parser failed somehow near here: (EOL)

ok juz mam :)
ale mam pytanie jak dostac sie do opt zeby wgrac ADOS?

cd /opt ?.............
08-02-2010, 21:09
adek24

Quote:

Originally Posted by Lesiuk

cd /opt ?.............

no tak spoko ale jak mam teraz wgrac pliki ados do folderu serwera;]?
08-02-2010, 21:21
kauczu

Quote:

Originally Posted by adek24

no tak spoko ale jak mam teraz wgrac pliki ados do folderu serwera;]?

... np. przez ftp ...
08-02-2010, 21:22
cichy

W lighttpd.conf ustawiasz folder www i nie musi to być flash routera (nawet lepiej żeby nie był) i później tam wrzucasz pliki ADOS'a, przykładowa ścieżka do folderu z plikami to /tmp/harddisk/www.
08-02-2010, 21:56
adek24

ok dziwne jest to ze nawet po zmianie folderu i wgraniu tam ados nadal jest komunikat:
http://img705.imageshack.us/img705/6...ytywanieeu.jpg
09-02-2010, 11:17
kauczu

Quote:

Originally Posted by adek24

ok dziwne jest to ze nawet po zmianie folderu i wgraniu tam ados nadal jest komunikat:
http://img705.imageshack.us/img705/6...ytywanieeu.jpg

Taki komunikat mo¿e z du¿ym prawdopodobieñstwem ¶wiadczyæ o tym, ¿e lighttpd nie jest uruchomiony na porcie 8080.

Wobec tego warto (zanim zaczniesz instalowaæ ADOS) zatroszczyæ siê o to czy lighttpd jest zainstalowany i skonfigurowany poprawnie na routerze.
Zacznij od przeanalizowania logów b³êdów. Domy¶lna ¶cie¿ka (przynajmniej w moim przypadku) to: /opt/var/log/lighttpd/error.log
09-02-2010, 22:31
adek24

Quote:

Originally Posted by kauczu

Taki komunikat mo¿e z du¿ym prawdopodobieñstwem ¶wiadczyæ o tym, ¿e lighttpd nie jest uruchomiony na porcie 8080.

Wobec tego warto (zanim zaczniesz instalowaæ ADOS) zatroszczyæ siê o to czy lighttpd jest zainstalowany i skonfigurowany poprawnie na routerze.
Zacznij od przeanalizowania logów b³êdów. Domy¶lna ¶cie¿ka (przynajmniej w moim przypadku) to: /opt/var/log/lighttpd/error.log

niby wg poradnika uruchamialem go na 8080 a tak to wyglada w logu:

Code:

2010-02-08 13:05:19: (log.c.166) server started 2010-02-08 13:05:19: (server.c.1105) fdevent_init failed 2010-02-08 16:58:47: (log.c.166) server started 2010-02-08 16:58:47: (server.c.1105) fdevent_init failed 1970-01-01 01:00:18: (log.c.166) server started 1970-01-01 01:00:18: (server.c.1105) fdevent_init failed 2010-02-08 21:17:13: (log.c.166) server started 2010-02-08 21:17:13: (server.c.1105) fdevent_init failed 2010-02-08 21:23:12: (log.c.166) server started 2010-02-08 21:23:12: (server.c.1105) fdevent_init failed 1970-01-01 01:00:18: (log.c.166) server started 1970-01-01 01:00:18: (server.c.1105) fdevent_init failed 1970-01-01 01:00:18: (log.c.166) server started 1970-01-01 01:00:18: (server.c.1105) fdevent_init failed 2010-02-08 21:28:30: (log.c.166) server started 2010-02-08 21:28:30: (server.c.1105) fdevent_init failed 2010-02-08 21:35:21: (log.c.166) server started 2010-02-08 21:35:21: (server.c.1105) fdevent_init failed 2010-02-08 21:49:03: (log.c.166) server started 2010-02-08 21:49:03: (server.c.1105) fdevent_init failed 2010-02-08 21:59:04: (log.c.166) server started 2010-02-08 21:59:04: (server.c.1105) fdevent_init failed 1970-01-01 01:00:19: (log.c.166) server started 1970-01-01 01:00:19: (server.c.1105) fdevent_init failed 1970-01-01 01:00:18: (log.c.166) server started 1970-01-01 01:00:18: (server.c.1105) fdevent_init failed
10-02-2010, 11:15
kauczu

Quote:

Originally Posted by adek24

Code:

fdevent_init failed

wujek Google prawdê Ci powie http://www.google.pl

PS: Daleko nie szukaj - 1szy wynik
10-02-2010, 22:18
adek24

Quote:

Originally Posted by kauczu

wujek Google prawdê Ci powie http://www.google.pl

PS: Daleko nie szukaj - 1szy wynik

ok wujek google podpowiedzial
http://www.mattgibson.ca/2009/11/05/...n-asus-wl-500/
ale teraz mam blad:
500 - Internal Server Error
strony html dzialaja problem jest z php

log pokazuje teraz inne bledy...:

Code:

2010-02-10 21:57:11: (log.c.166) server started 2010-02-10 21:57:14: (mod_fastcgi.c.1734) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-0 2010-02-10 21:57:14: (mod_fastcgi.c.3024) backend died; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 1 2010-02-10 21:57:14: (mod_fastcgi.c.2803) child signaled: 11 2010-02-10 21:57:14: (mod_fastcgi.c.2569) unexpected end-of-file (perhaps the fastcgi process died): pid: 233 socket: unix:/tmp/php-fastcgi.socket-0 2010-02-10 21:57:14: (mod_fastcgi.c.3354) response not received, request sent: 814 on socket: unix:/tmp/php-fastcgi.socket-0 for /index.php?, closing connection 2010-02-10 22:05:45: (mod_fastcgi.c.1734) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-0 2010-02-10 22:05:45: (mod_fastcgi.c.3024) backend died; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 1 2010-02-10 22:05:45: (mod_fastcgi.c.2803) child signaled: 11 2010-02-10 22:05:45: (mod_fastcgi.c.2569) unexpected end-of-file (perhaps the fastcgi process died): pid: 269 socket: unix:/tmp/php-fastcgi.socket-0 2010-02-10 22:05:45: (mod_fastcgi.c.3354) response not received, request sent: 814 on socket: unix:/tmp/php-fastcgi.socket-0 for /index.php?, closing connection 2010-02-10 22:12:01: (mod_fastcgi.c.1734) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-0 2010-02-10 22:12:01: (mod_fastcgi.c.3024) backend died; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 1 2010-02-10 22:12:01: (mod_fastcgi.c.2803) child signaled: 11 2010-02-10 22:12:01: (mod_fastcgi.c.2569) unexpected end-of-file (perhaps the fastcgi process died): pid: 292 socket: unix:/tmp/php-fastcgi.socket-0 2010-02-10 22:12:01: (mod_fastcgi.c.3354) response not received, request sent: 843 on socket: unix:/tmp/php-fastcgi.socket-0 for /index.php?, closing connection
11-02-2010, 13:09
kauczu

Quote:

Originally Posted by adek24

ok wujek google podpowiedzial
http://www.mattgibson.ca/2009/11/05/...n-asus-wl-500/
ale teraz mam blad:
500 - Internal Server Error
strony html dzialaja problem jest z php

log pokazuje teraz inne bledy...:

Code:

2010-02-10 21:57:11: (log.c.166) server started 2010-02-10 21:57:14: (mod_fastcgi.c.1734) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-0 2010-02-10 21:57:14: (mod_fastcgi.c.3024) backend died; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 1 2010-02-10 21:57:14: (mod_fastcgi.c.2803) child signaled: 11 2010-02-10 21:57:14: (mod_fastcgi.c.2569) unexpected end-of-file (perhaps the fastcgi process died): pid: 233 socket: unix:/tmp/php-fastcgi.socket-0 2010-02-10 21:57:14: (mod_fastcgi.c.3354) response not received, request sent: 814 on socket: unix:/tmp/php-fastcgi.socket-0 for /index.php?, closing connection 2010-02-10 22:05:45: (mod_fastcgi.c.1734) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-0 2010-02-10 22:05:45: (mod_fastcgi.c.3024) backend died; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 1 2010-02-10 22:05:45: (mod_fastcgi.c.2803) child signaled: 11 2010-02-10 22:05:45: (mod_fastcgi.c.2569) unexpected end-of-file (perhaps the fastcgi process died): pid: 269 socket: unix:/tmp/php-fastcgi.socket-0 2010-02-10 22:05:45: (mod_fastcgi.c.3354) response not received, request sent: 814 on socket: unix:/tmp/php-fastcgi.socket-0 for /index.php?, closing connection 2010-02-10 22:12:01: (mod_fastcgi.c.1734) connect failed: Connection refused on unix:/tmp/php-fastcgi.socket-0 2010-02-10 22:12:01: (mod_fastcgi.c.3024) backend died; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 1 2010-02-10 22:12:01: (mod_fastcgi.c.2803) child signaled: 11 2010-02-10 22:12:01: (mod_fastcgi.c.2569) unexpected end-of-file (perhaps the fastcgi process died): pid: 292 socket: unix:/tmp/php-fastcgi.socket-0 2010-02-10 22:12:01: (mod_fastcgi.c.3354) response not received, request sent: 843 on socket: unix:/tmp/php-fastcgi.socket-0 for /index.php?, closing connection

Je¿eli masz ustawion± sekcjê fastcgi pliku lighttpd.conf zgodnie z pierwszym postem to usuñ plik /opt/etc/lighttpd/conf.d/10-php-fcgi.conf

Quote:

rm /opt/etc/lighttpd/conf.d/10-php-fcgi.conf

Daj znaæ czy to co¶ da³o czy nie.
11-02-2010, 17:18
adek24

Quote:

Originally Posted by kauczu

Je¿eli masz ustawion± sekcjê fastcgi pliku lighttpd.conf zgodnie z pierwszym postem to usuñ plik /opt/etc/lighttpd/conf.d/10-php-fcgi.conf

Daj znaæ czy to co¶ da³o czy nie.

niestety nic nie dalo zresetowalem router serwer tez nic to nie dalo
11-02-2010, 19:09
kauczu

Jakie masz wersje wymaganych paczek, bo jak inne ni¿:

Code:

cron - 4.1-7 libcurl - 7.20.0-1 lighttpd - 1.4.26-1 php - 5.2.12-1 php-fcgi - 5.2.12-1 php-gd - 5.2.12-1 sqlite - 3.6.22-1 wget - 1.12-2

to zrób upgrade do najnowszych wersji:

Code:

ipkg update ipkg upgrade

Wklej swój lighttpd.conf mo¿e wspólnie co¶ wy³apiemy.
11-02-2010, 21:49
adek24

2 Attachment(s)

Quote:

Originally Posted by kauczu

Jakie masz wersje wymaganych paczek, bo jak inne ni¿:

Code:

cron - 4.1-7 libcurl - 7.20.0-1 lighttpd - 1.4.26-1 php - 5.2.12-1 php-fcgi - 5.2.12-1 php-gd - 5.2.12-1 sqlite - 3.6.22-1 wget - 1.12-2

to zrób upgrade do najnowszych wersji:

Code:

ipkg update ipkg upgrade

Wklej swój lighttpd.conf mo¿e wspólnie co¶ wy³apiemy.

urruchomine usługi:

Code:

Package php-fcgi (5.2.12-1) installed in /opt/ is up to date. Nothing to be done Successfully terminated. [admin@Adek root]$ ipkg list_installed bzip2 - 1.0.5-2 - Very high-quality data compression program cron - 4.1-7 - Standard vixie cron, with cron.d addition cyrus-sasl-libs - 2.1.23-1 - Provides client or server side authentication (see RFC 2222). expat - 2.0.1-1 - XML Parser library fontconfig - 2.5.0-0 - Font configuration library freetype - 2.3.6-1 - Free truetype library gconv-modules - 2.2.5-7 - Provides gconv modules missing from the firmware. These are used by glibc iconv() implementation. gdbm - 1.8.3-2 - GNU dbm is a set of database routines that use extensible hashing. It works similar to the standard UNIX dbm routines. htop - 0.8.3-1 - An interactive process viewer. libcurl - 7.20.0-1 - Curl is a command line tool for transferring files with URL syntax, supporting FTP, FTPS, HTTP, HTTPS, GOPHER, TELNET, DICT, FI libdb - 4.2.52-3 - Berkeley DB Libraries libevent - 1.4.13-1 - libevent to implement an event loop libgd - 2.0.35-4 - An ANSI C library for the dynamic creation of images libjpeg - 6b-3 - collection of jpeg tools libpng - 1.2.42-1 - Portable Network Graphics Libraries libuclibc++ - 0.2.2-8 - C++ standard library designed for use in embedded systems libxml2 - 2.7.6-1 - Libxml2 is the XML C parser and toolkit developed for the Gnome project. libxslt - 1.1.26-1 - An XML Stylesheet processor based on libxml2 lighttpd - 1.4.26-1 - A fast webserver with minimal memory footprint. nano - 2.2.1-1 - A pico like editor ncurses - 5.7-1 - NCurses libraries openldap-libs - 2.3.43-1 - Open Lightweight Directory Access Protocol openssl - 0.9.7m-5 - Openssl provides the ssl implementation in libraries libcrypto and libssl, and is needed by many other applications and librari pcre - 8.01-1 - Perl-compatible regular expression library php - 5.2.12-1 - The php scripting language php-fcgi - 5.2.12-1 - The php scripting language, built as an fcgi module php-gd - 5.2.12-1 - libgd extension for php php-mbstring - 5.2.12-1 - mbstring extension for php readline - 6.1-1 - The GNU Readline library provides a set of functions for use by applications that allow users to edit command lines as they are spawn-fcgi - 1.6.3-1 - spawn-fcgi is used to spawn fastcgi applications sqlite - 3.6.22-1 - SQLite is a small C library that implements a self-contained, embeddable, zero-configuration SQL database engine. transmission - 1.83-1 - Lightweight BitTorrent client and daemon, with web interface bundled. wget - 1.12-2 - A network utility to retrieve files from the Web zlib - 1.2.3-3 - zlib is a library implementing the 'deflate' compression system.

dolaczam plik lighttpd.conf udalo mi sie zaktualizowac i ruszylo ale teraz przy adosie jest fatal:
Fatal error: This system requires PHP 5.1.3 or over. Your PHP version is .
strony php dzialaja ale ados nie

dla ulatwienia dodam plik phpinfo ktory wskazuje na wersje 5.2 wiec czemu ados nie rusza...

Show 40 post(s) from this thread on one page