Íàñòðîéêà mpcs íà ðîóòåðå

Quote:

---

Originally Posted by melius

1. à ÷òî çíà÷èò ñî âñòðîåííûì ìïêñ?

2. ïðîøèâêà ÷åøñêàÿ WL500gpV2-1.9.2.7-10-USB-1.71. ìïêñ íà íå¸ ñàì óñòàíàâëèâàë.

3. ñâÿçêà open 770 + com-usb + ðîóòåð ðàáîòàåò, íî èíîãäà âûðóáàåòñÿ, íå ïîëó÷àåò êëþ÷è.. stop poll, timeout... à ïîòîì ñàì âîññòàíàâëèâàåòñÿ ÷åðåç ìèíóòó, ÷åðåç 15 ìèíóò.... êàê òîëüêî ãëþêíåò åù¸ ðàç ñîõðàíþ ëîã ìïêñ

---

Ïðîøèâêà ñî âñòðîåííîé mpcs ñì. http://wl500g.info/showpost.php?p=173085&postcount=287 åñòü è íîâåå ñì.
1.9.2.7-627-d-3g-wimax-mpcs http://rapidshare.de/files/48422578/...-mpcs.rar.html

Øàðèíã-ñåðâåð íà Asus WL500gP

Ïðîøèâêà 1.9.2.7-d
Íà ñîôòå äëÿ ÷àéíèêîâ

http://s003.radikal.ru/i201/1002/21/4b296f0e5f29.jpg

NewCS 1.6

http://s003.radikal.ru/i201/1002/ca/4355d94ed5b3.jpg

Êîïèðóåòå ñ ïîìîùüþ Winscp423 ïðèëàãàåìûé ôàéë newcs_asus.tar.gz íà /tmp/mnt/disc0_3/
Çàïóñêàåòå Putty, çàõîäèòå íà ðîóòåð è ïåðåõîäèòå

Code:

---

cd /tmp/mnt/disc0_3/

---

Äàåòå êîìàíäó íà ðàçàðõèâàöèþ

Code:

---

tar zxf newcs_asus.tar.gz

---

Íà ñîôòå äëÿ ÷àéíèêîâ çàìåíèòü ôàéë newcs.xml íà ïðèëàãàåìûé â newcs.rar äëÿ ïîðòà 8081, äëÿ çàïóñêà NewCS ïî http://192.168.1.1:8081

Ëîãèí è ïàðîëü newcs

Äîáàâëÿåòå â /usr/local/sbin/post-firewall

PHP Code:

---

iptables -I INPUT -j ACCEPT -p tcp --dport 15000 


---

Code:

---

nano /usr/local/sbin/post-firewall

---

Ñîäåðæèìîå ôàéëà ñ äîñòóïîì ïî www.dyndns.org ñ çàùèòîé îò àòàê, íåîáõîäèìî óñòàíîâèòü íà ñåòåâîé êàðòå êîìïüþòåðà äëÿ äîñòóïà ê ðîóòåðó IP àäðåñ 192.168.1.2, ïîðò 15000 äëÿ newcamd, ïîðò 15001 äëÿ cs357x.

PHP Code:

---

#!/bin/sh 
# port rtorrent 
iptables -I INPUT -p tcp --dport 51778 -j ACCEPT
# port FTP
iptables -A INPUT -p tcp -s 192.168.1.2 --dport 21 -j ACCEPT
#port SSH
iptables -A INPUT -p tcp -s 192.168.1.2 --dport 22 -j ACCEPT
# port Telnet
iptables -A INPUT -p tcp -s 192.168.1.2 --dport 23 -j ACCEPT
# port http
iptables -P INPUT DROP
iptables -D INPUT -j DROP
iptables -A INPUT -p tcp -m state --state NEW --dport 80 -m recent --set --name SSH_ATTACKER --rsource iptables -A INPUT -p tcp –m state --state NEW --dport 80 -m recent --update --seconds 600 --hitcount 3 --name SSH_ATTACKER --rsource -j DROP
iptables -À INPUT -p tcp --dport 80 -j ACCEPT
# ports Newcs
iptables -I INPUT -p tcp --dport 15000 -j ACCEPT
iptables -I INPUT -p udp --dport 15001 -j ACCEPT 


---

Ñîõðàíÿåòå ñäåëàííîå êîìàíäîé

Code:

---

flashfs save && flashfs commit && flashfs enable && reboot

---

Äîáàâëÿåòå ñòðîêè â /tmp/mnt/disc0_3/newcs_asus/bin/start - äëÿ àâòîçàïóñêà
insmod pl2303 - èñïîëüçóåòå êàáåëü PL2303
insmod ftdi_sio - èñïîëüçóåòå êàáåëü FTDI

Code:

---

nano /tmp/mnt/disc0_3/newcs_asus/bin/start

---

Ïðèìåð ñîäåðæàíèÿ ôàéëà íà ñîôòå äëÿ ÷àéíèêîâ, èñïîëüçóåòå êàáåëü FTDI äëÿ Ôåíèêñ êàðòðèäåðà

PHP Code:

---

#!/bin/sh
RUNDIR=$(echo $(pwd)/$0|sed -e "s:[/][^/]*$::g" -e"s:.*[/][/]:/:")
export LD_LIBRARY_PATH=$RUNDIR/../lib
insmod usbserial.o
#insmod pl2303.o
insmod ftdi_sio.o
$RUNDIR/newcs -C $RUNDIR/newcs.xml 


---

Çàïóñêàåòå NewCS êîìàíäîé

Code:

---

./start

---

Äîáàâëÿåòå äëÿ àâòîçàïóñêà â ôàéë /usr/local/sbin/post-mount êîìàíäîé

Code:

---

nano /usr/local/sbin/post-mount

---

còðîêó tmp/mnt/disc0_3/newcs_asus/bin/start

Ïðèìåð ñîäåðæàíèÿ ôàéëà íà ñîôòå äëÿ ÷àéíèêîâ

PHP Code:

---

#! /bin/sh 
/tmp/mnt/disc0_3/newcs_asus/bin/start  
/opt/etc/init.d/rc.unslung start 
if [ -e /tmp/harddisk/torrent/session/*.lock ];  then 
rm /tmp/harddisk/torrent/session/*.lock 
rm /opt/var/run/*.pid 
fi 


---

Ñîõðàíÿåòå ñäåëàííîå êîìàíäîé

Code:

---

flashfs save && flashfs commit && flashfs enable && reboot

---

Äîñòóï ê NewCS ïî http://192.168.1.1:8081

Äëÿ ïðîñìîòðà ëîãà /tmp/newcs.log âûïîëíÿåòå

Code:

---

nano /tmp/newcs.log

---

Äëÿ îñòàíîâêè Newcs âûïîëíÿåòå

Code:

---

killall newcs

---

NewCS 1.65 íà ðîóòåðå Asus WL-500gP

Ïðîøèâêà 1.9.2.7-d
Íà ñîôòå äëÿ ÷àéíèêîâ

http://s006.radikal.ru/i213/1002/1d/023e0de08ab8.jpg

http://s003.radikal.ru/i201/1002/ca/4355d94ed5b3.jpg

http://s60.radikal.ru/i167/1003/dc/fa60dd304a74.jpg

Ñêà÷èâàåòå ïðèëàãàåìûé ôàéë cs.tar
Çàõîäèòå â ðîóòåð ñ ïîìîùüþ Putty è ïåðåõîäèòå â äèðåêòîðèþ

Code:

---

cd /tmp/mnt/disc0_3

---

Ñîçäàåòå äèðåêòîðèþ

Code:

---

mkdir cs

---

Ïåðåõîäèòå â ýòó äèðåêòîðèþ

Code:

---

cd cs

---

Îòêðûâàåòå Winscp423 è êîïèðóåòå ñêà÷åííûé ôàéë cs.tar â äèðåêòîðèþ /tmp/mnt/disc0_3/cs

 Putty ðàçàðõèâèðóåòå ôàéë êîìàíäîé

Code:

---

tar zxf cs.tar.gz

---

Ñ ïîìîùüþ WinSCP çàìåíÿåòå ôàéë newcs.xml íà ïðèëàãàåìûé àðõèâèðîâàííûé ôàéë newcs.xml äëÿ çàïóñêà NewCS ïî http://192.168.1.1:8081
Ëîãèí è ïàðîëü newcs

Îòêîððåêòèðóéòå ôàéë ./start.sh

Code:

---

nano /tmp/mnt/disc0_3/cs/start.sh

---

insmod ftdi_sio - èñïîëüçóåòå êàáåëü FTDI
insmod pl2303 - èñïîëüçóåòå êàáåëü PL2303

Ïðèìåð ñîäåðæàíèÿ ôàéëà íà ñîôòå äëÿ ÷àéíèêîâ, èñïîëüçóåòå êàáåëü FTDI äëÿ Ôåíèêñ êàðòðèäåðà

PHP Code:

---

#!/bin/sh
#set -x
dir=`dirname $0`
cd $dir

export LD_LIBRARY_PATH=.

insmod usbserial
insmod ftdi_sio
#insmod pl2303

./newcs -c newcs.xml

exit 0 


---

Çàïóñêàåòå NewCS êîìàíäîé

Code:

---

./start.sh

---

Äîáàâëÿåòå äëÿ àâòîçàïóñêà â ôàéë /usr/local/sbin/post-mount êîìàíäîé

Code:

---

nano /usr/local/sbin/post-mount

---

còðîêó /tmp/mnt/disc0_3/cs/start.sh

Ïðèìåð ñîäåðæàíèÿ ôàéëà íà ñîôòå äëÿ ÷àéíèêîâ

PHP Code:

---

#! /bin/sh
/tmp/mnt/disc0_3/cs/start.sh 
/opt/etc/init.d/rc.unslung start
if [ -e /tmp/harddisk/torrent/session/*.lock ];  then
rm /tmp/harddisk/torrent/session/*.lock
rm /opt/var/run/*.pid
fi 


---

Äîáàâëÿåòå â /usr/local/sbin/post-firewall

PHP Code:

---

iptables -I INPUT -j ACCEPT -p tcp --dport 15000 


---

Code:

---

nano /usr/local/sbin/post-firewall

---

Ñîäåðæèìîå ôàéëà ñ äîñòóïîì ïî www.dyndns.org ñ çàùèòîé îò àòàê, íåîáõîäèìî óñòàíîâèòü íà ñåòåâîé êàðòå êîìïüþòåðà äëÿ äîñòóïà ê ðîóòåðó IP àäðåñ 192.168.1.2, ïîðò 15000 äëÿ newcamd, ïîðò 15001 äëÿ cs357x.

PHP Code:

---

#!/bin/sh 
# port rtorrent 
iptables -I INPUT -p tcp --dport 51778 -j ACCEPT
# port FTP
iptables -A INPUT -p tcp -s 192.168.1.2 --dport 21 -j ACCEPT
#port SSH
iptables -A INPUT -p tcp -s 192.168.1.2 --dport 22 -j ACCEPT
# port Telnet
iptables -A INPUT -p tcp -s 192.168.1.2 --dport 23 -j ACCEPT
# port http
iptables -P INPUT DROP
iptables -D INPUT -j DROP
iptables -A INPUT -p tcp -m state --state NEW --dport 80 -m recent --set --name SSH_ATTACKER --rsource iptables -A INPUT -p tcp –m state --state NEW --dport 80 -m recent --update --seconds 600 --hitcount 3 --name SSH_ATTACKER --rsource -j DROP
iptables -À INPUT -p tcp --dport 80 -j ACCEPT
# ports Newcs
iptables -I INPUT -p tcp --dport 15000 -j ACCEPT
iptables -I INPUT -p udp --dport 15001 -j ACCEPT 


---

Ñîõðàíÿåòå ñäåëàííîå êîìàíäîé

Code:

---

flashfs save && flashfs commit && flashfs enable && reboot

---

Äîñòóï ê NewCS ïî http://192.168.1.1:8081

Äëÿ ïðîñìîòðà ëîãà /tmp/newcs.log âûïîëíÿåòå

Code:

---

nano /tmp/newcs.log

---

Äëÿ îñòàíîâêè Newcs âûïîëíÿåòå

Code:

---

killall newcs

---

Íàñòðîéêè â âåáìîðäå äëÿ âíåøíåãî äîñòóïà ïî www.dyndns.org
Âíåøíèé äîñòóï http://âàø.dyndns.org/rtorrent - ê òîððåíòó, http://âàø.dyndns.org/rrd - ê ãðàôèêàì, http://âàø.dyndns.org:8080 - ê ðîóòåðó, http://âàø.dyndns.org:901 - ê óïðàâëåíèþ ñàìáîé, ftp://âàø.dyndns.org - ê ôàéëàì íà ñàìáå.

http://s51.radikal.ru/i133/1010/c3/e9bbb2a205e2.jpg

 ïðèëîæåíèè àðõèâèðîâàííûå ôàéëû cs.tar.gz è newcs.xml

Quote:

---

Originally Posted by Corry

Ïîíèìàåøü, âñ¸ ÿ ðóêàìè íàñòðîèë, è ðàçíûå òàéìàóòû è äåëåé ñòàâèë. Áåç òîëêó, âñ¸ ðàâíî ðàç â 15 ìèíóò çàòûê. Òîëüêî íà ñîðèíîâñêóþ âåðíóëñÿ ñ ëþáûìè ïàðàìåòðàìè ðàáîòàåò áåç çàòûêîâ. ðåñèâåð îïåí ô500

---

Åñëè mpcs 0.9, òî ìåíÿé, íà íåì è ó ìåíÿ çàòûêàåòñÿ.

âïàÿë êîì-ïîðò , ñäåëàë íóëü-ìîäåìíûé êàáåëü,çàëèë ïîøèâêó 1.9.2.7-d-r706M, çäåëàë âñ¸ êàê íàïèñàíî â èíñòðóêöèè http://wl500g.info/showpost.php?p=73239&postcount=64 ,
íè÷åãî íå ïîëó÷èëîñü
ïîäêëþ÷èë ðîóòåð ê êîì-ïîðòó êîìïà , âêëþ÷èë PuTTY ( â windows 7 ãèïåðòåðìèíàëà íåò)
ïóòòè âûäàë :

Code:

---

Decompressing..........done


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Jan 28 10:52:32 CST 2008 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.31.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes

Total memory used by CFE:  0x80400000 - 0x80497FF0 (622576)
Initialized Data:          0x8042F370 - 0x80431830 (9408)
BSS Area:                  0x80431830 - 0x80431FF0 (1984)
Local Heap:                0x80431FF0 - 0x80495FF0 (409600)
Stack Area:                0x80495FF0 - 0x80497FF0 (8192)
Text (code) segment:      0x80400000 - 0x8042F370 (193392)
Boot area (physical):      0x00498000 - 0x004D8000
Relocation Factor:        I:00000000 - D:00000000

Device eth0:  hwaddr 90-E6-BA-55-24-EB, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: TFTP Server.
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 5320 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000

---

îò MPCS ñèãíàëîâ íåò (( , ïîäñêàæèòå ÷òî íå òàê ? Ìîæåò êàáåëü íå òîò ?
Âîò íà âñÿê ñëó÷àé ëîã

Code:

---

Jan  1 02:00:02 syslogd started: BusyBox v1.15.2
Jan  1 02:00:02 kernel: klogd started: BusyBox v1.15.2 (2009-10-20 07:37:49 PDT)
Jan  1 02:00:02 kernel: CPU revision is: 00029029
Jan  1 02:00:02 kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan  1 02:00:02 kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan  1 02:00:02 kernel: Linux version 2.4.37.6 (root@localhost) (gcc version 3.4.6) #1 2009-10-20 07:46:47 PDT
Jan  1 02:00:02 kernel: Setting the PFC to its default value
Jan  1 02:00:02 kernel: Determined physical RAM map:
Jan  1 02:00:02 kernel:  memory: 02000000 @ 00000000 (usable)
Jan  1 02:00:02 kernel: On node 0 totalpages: 8192
Jan  1 02:00:02 kernel: zone(0): 8192 pages.
Jan  1 02:00:02 kernel: zone(1): 0 pages.
Jan  1 02:00:02 kernel: eth1: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.29
Jan  1 02:00:02 kernel: device eth0 entered promiscuous mode
Jan  1 02:00:02 kernel: device vlan0 entered promiscuous mode
Jan  1 02:00:02 kernel: device eth1 entered promiscuous mode
Jan  1 02:00:02 kernel: eth1: attempt to add interface with same source address.
Jan  1 02:00:02 kernel: br0: port 2(eth1) entering learning state
Jan  1 02:00:02 kernel: br0: port 1(vlan0) entering learning state
Jan  1 02:00:02 kernel: br0: port 2(eth1) entering forwarding state
Jan  1 02:00:02 kernel: br0: topology change detected, propagating
Jan  1 02:00:02 kernel: br0: port 1(vlan0) entering forwarding state
Jan  1 02:00:02 dnsmasq[68]: started, version 2.51 cachesize 512
Jan  1 02:00:02 dnsmasq[68]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-scripts no-TFTP
Jan  1 02:00:02 dnsmasq-dhcp[68]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, lease time 1d
Jan  1 02:00:02 dnsmasq[68]: read /etc/hosts - 2 addresses
Jan  1 02:00:02 dnsmasq[68]: using nameserver 10.56.2.200#53
Jan  1 02:00:02 kernel: usb.c: registered new driver usbdevfs
Jan  1 02:00:02 kernel: usb.c: registered new driver hub
Jan  1 02:00:02 kernel: usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
Jan  1 02:00:02 kernel: usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
Jan  1 02:00:02 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan  1 02:00:02 kernel: hub.c: USB hub found
Jan  1 02:00:02 kernel: hub.c: 2 ports detected
Jan  1 02:00:03 kernel: ehci_hcd 00:03.1: PCI device 14e4:471a
Jan  1 02:00:03 kernel: ehci_hcd 00:03.1: irq 6, pci mem b8003800
Jan  1 02:00:03 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan  1 02:00:03 kernel: ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 10 Dec 2004/2.4
Jan  1 02:00:03 kernel: hub.c: USB hub found
Jan  1 02:00:03 kernel: hub.c: 2 ports detected
Jan  1 02:00:03 kernel: usb.c: registered new driver usblp
Jan  1 02:00:03 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan  1 02:00:03 kernel: Linux video capture interface: v1.00
Jan  1 02:00:03 kernel: SCSI subsystem driver Revision: 1.00
Jan  1 02:00:03 kernel: hub.c: new USB device 00:03.1-1, assigned address 2
Jan  1 02:00:03 kernel: hub.c: USB hub found
Jan  1 02:00:03 kernel: hub.c: 2 ports detected
Jan  1 02:00:03 kernel: Initializing USB Mass Storage driver...
Jan  1 02:00:03 kernel: usb.c: registered new driver usb-storage
Jan  1 02:00:03 kernel: USB Mass Storage support registered.
Jan  1 02:00:03 kernel: vlan1: Setting MAC address to  00 e0 4d 8e c5 b9.
Feb 25 17:28:40 ntp client: Synchronizing time with time.nist.gov ...
Feb 25 17:30:44 login[111]: root login on 'pts/0'

---

ìîæíî êàê òî ñêðèïò îäíîé "ãèðëÿíäû" âûëîæèòü? Äëÿ óñòàíîâêè åãî â óæå èìåþùèåñÿ ïðîøèâêè? Áîëüíî íå õî÷åòñÿ ñíîñèòü ðàáîòàþùóþ ñèñòåìó.

Quote:

---

Originally Posted by SergKoleso

âïàÿë êîì-ïîðò , ñäåëàë íóëü-ìîäåìíûé êàáåëü,çàëèë ïîøèâêó 1.9.2.7-d-r706M, çäåëàë âñ¸ êàê íàïèñàíî â èíñòðóêöèè http://wl500g.info/showpost.php?p=73239&postcount=64 ,
íè÷åãî íå ïîëó÷èëîñü
ïîäêëþ÷èë ðîóòåð ê êîì-ïîðòó êîìïà , âêëþ÷èë PuTTY ( â windows 7 ãèïåðòåðìèíàëà íåò)
ïóòòè âûäàë :

---

Ñêàæèòå åìó â êîíñîëè

Code:

---

nvram set kernel_args="root=/dev/mtdblock2 rootfstype=squashfs,ext3 noinitrd init=/linuxrc console=null"
nvram commit

---

è ïåðåãðóçèòå ðîóòåð.

Quote:

---

Originally Posted by AndreyUA

Ñêàæèòå åìó â êîíñîëè

Code:

---

nvram set kernel_args="root=/dev/mtdblock2 rootfstype=squashfs,ext3 noinitrd init=/linuxrc console=null"
nvram commit

---

è ïåðåãðóçèòå ðîóòåð.

---

íå ïîìîãëî ((
çàëèë WL500gpv2-1.9.2.7-d-r1222 , óñòàíîâèë "Êîìïëåêò äëÿ ÷àéíèêîâ" , ïîäñêàæèòå ÷òî íàäî äåëàòü ÷òîá óñòàíîâèòü MPCS è íå ãðîõíóòü óæå óñòàíîâëåííûå ïðîãè ?
Çàðàíåå áëàãîäàðåí .

Quote:

---

Originally Posted by SergKoleso

íå ïîìîãëî ((
çàëèë WL500gpv2-1.9.2.7-d-r1222 , óñòàíîâèë "Êîìïëåêò äëÿ ÷àéíèêîâ" , ïîäñêàæèòå ÷òî íàäî äåëàòü ÷òîá óñòàíîâèòü MPCS è íå ãðîõíóòü óæå óñòàíîâëåííûå ïðîãè ?
Çàðàíåå áëàãîäàðåí .

---

îíà ó òåáÿ â ïðîöåññàõ çàïóùåíà? êîíôèãè â /tmp/local âûëîæèë?

Quote:

---

Originally Posted by Corry

îíà ó òåáÿ â ïðîöåññàõ çàïóùåíà? êîíôèãè â /tmp/local âûëîæèë?

---

ñäåëàë âñ¸ êà òàì (ïî ïðèêðåïë¸ííîìó ôàéëó) http://wl500g.info/showpost.php?p=73239&postcount=64
ñå÷àñ óæå óñòàíîâèë êó÷ó ïðîã , êà÷àþ òîððåíòû , âîïðîñ íåìíîãî äðóãîé: êàê óñòàíîâèòü MPCS íå ñíîñÿ ïðîãðàììû ?

Ñäåëàë âñ¸ êàê íàïèñàíî http://wl500g.info/showpost.php?p=185920&postcount=338
Ðåçóëüòàò 0 , íà ðîóòåðå ïîãàñëà ëàìïî÷êà ÏÎÂÅÐ ((( ÷òî íå òàê ?
Ëîã ðîóòåðà :

Code:

---

Jan  1 02:00:01 syslogd started: BusyBox v1.15.3
Jan  1 02:00:01 kernel: klogd started: BusyBox v1.15.3 (2010-02-25 15:27:58 EET)
Jan  1 02:00:01 kernel: CPU revision is: 00029029
Jan  1 02:00:01 kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan  1 02:00:01 kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan  1 02:00:01 kernel: Linux version 2.4.37.9 (root@localhost) (gcc version 3.4.6) #4 2010-02-25 15:29:16 EET
Jan  1 02:00:01 kernel: Setting the PFC to its default value
Jan  1 02:00:01 kernel: Determined physical RAM map:
Jan  1 02:00:01 kernel:  memory: 02000000 @ 00000000 (usable)
Jan  1 02:00:01 kernel: On node 0 totalpages: 8192
Jan  1 02:00:01 kernel: zone(0): 8192 pages.
Jan  1 02:00:01 kernel: zone(1): 0 pages.
Jan  1 02:00:01 kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
Jan  1 02:00:01 kernel: ttyS01 at 0xb8000400 (irq = 3) is a 16550A
Jan  1 02:00:01 kernel: HDLC line discipline: version $Revision: 3.7 $, maxframe=4096
Jan  1 02:00:01 kernel: N_HDLC line discipline registered.
Jan  1 02:00:01 kernel: loop: loaded (max 8 devices)
Jan  1 02:00:01 kernel: PPP generic driver version 2.4.2
Jan  1 02:00:01 kernel: PPP Deflate Compression module registered
Jan  1 02:00:01 kernel: PPP BSD Compression module registered
Jan  1 02:00:01 kernel: MPPE/MPPC encryption/compression module registered
Jan  1 02:00:01 kernel: PPPoL2TP kernel driver, V0.15.1
Jan  1 02:00:01 kernel: PPTP driver version 0.8.5-rc1
Jan  1 02:00:02 dnsmasq[69]: started, version 2.52 cachesize 512
Jan  1 02:00:02 dnsmasq[69]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-scripts no-TFTP
Jan  1 02:00:02 dnsmasq-dhcp[69]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, lease time 1d
Jan  1 02:00:02 dnsmasq[69]: read /etc/hosts - 2 addresses
Jan  1 02:00:02 dnsmasq[69]: using nameserver 10.56.2.200#53
Jan  1 02:00:02 kernel: usb.c: registered new driver usbdevfs
Jan  1 02:00:02 kernel: usb.c: registered new driver hub
Jan  1 02:00:02 kernel: usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
Jan  1 02:00:02 kernel: usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
Jan  1 02:00:02 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan  1 02:00:02 kernel: hub.c: USB hub found
Jan  1 02:00:02 kernel: hub.c: 2 ports detected
Jan  1 02:00:02 kernel: ehci_hcd 00:03.1: PCI device 14e4:471a
Jan  1 02:00:02 kernel: ehci_hcd 00:03.1: irq 6, pci mem b8003800
Jan  1 02:00:02 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan  1 02:00:02 kernel: ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 10 Dec 2004/2.4
Jan  1 02:00:02 kernel: hub.c: USB hub found
Jan  1 02:00:02 kernel: hub.c: 2 ports detected
Jan  1 02:00:03 kernel: usb.c: registered new driver usblp
Jan  1 02:00:03 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan  1 02:00:03 kernel: Linux video capture interface: v1.00
Jan  1 02:00:03 kernel: SCSI subsystem driver Revision: 1.00
Jan  1 02:00:03 kernel: hub.c: new USB device 00:03.1-1, assigned address 2
Jan  1 02:00:03 kernel: hub.c: USB hub found
Jan  1 02:00:03 kernel: hub.c: 2 ports detected
Jan  1 02:00:03 kernel: Initializing USB Mass Storage driver...
Jan  1 02:00:03 kernel: usb.c: registered new driver usb-storage
Jan  1 02:00:03 kernel: USB Mass Storage support registered.
Jan  1 02:00:03 kernel: vlan1: Setting MAC address to  00 e0 4d 8e c5 b9.
Feb 26 14:56:51 ntp client: Synchronizing time with time.nist.gov ...

---

êîíôèãè MPCS (êîíô,ñàðâåð,þçåð):

Code:

---

[global]
Nice = -20
#LogFile = log
#LogFile = /dev/tty
LogFile = stdout
ClientTimeout = 12
FallbackTimeout = 8
ClientMaxIdle = 99999
CacheDelay = 120

[serial]
Device = gi://tuner@/dev/tts/1?delay=1&timeout=300

---

Code:

---

[reader]
Label = Ðàäóãà ÒÂ (75e)
Protocol = newcamd
Key = 0102030405060708091011121314
Device = cserv9.net,14450
Account = ******,*******
Fallback = 0
Group = 1
CAID = 0652
IDENT = 000000
ReconnectTimeout = 20
InactivityTimeOut = 15

---

Code:

---

[account]
User = tuner
Pwd = tuner
#Uniq = 1
Group = 1
ChiD = 0652:15;0652:FFFF
IDENT = 0652:000000

---

êàáåëü íóëü-ìîäåì , â ñõåìå 2è3 ïîìåíÿë ìåñòàìè
WL-500gP V2
WL500gpv2-1.9.2.7-d-r1222M

Quote:

---

Originally Posted by karea

Òàê äåëàë?

Äëÿ òþíåðîâ, ïîäêëþ÷åííûõ ê COM ïîðòó ðîóòåðà íàïðÿìóþ
ââîäèì â êîìàíäíîé ñòðîêå ðîóòåðà êîìàíäû äëÿ îòâÿçêè êîíñîëè è ñîçäàíèÿ ñêðèïòà àâòîçàïóñêà mpcs:

Code:

---

nvram set kernel_args="root=/dev/mtdblock2 rootfstype=squashfs,ext3 noinitrd init=/linuxrc console=null"
nvram commit

mkdir /usr/local/sbin
echo "#!/bin/sh" > /usr/local/sbin/post-boot
echo "mpcs -c /tmp/local &" >> /usr/local/sbin/post-boot
chmod +x /usr/local/sbin/post-boot
echo "/usr/local/sbin/post-boot" > /usr/local/.files
flashfs enable
flashfs save
flashfs commit
reboot

---

---

äà èìåííî òàê

Íå ïîäåëèòåñü ëè ïàêåòèêîì èëè êàê ñîáèðàëè?
Ó ìåíÿ òîæå âîçíèêëà ïîòðåáíîñòü, íå çíàþ ñ êàêîé ñòîðîíû ïîäîéòè

Quote:

---

Originally Posted by karea

È ýòî òàê?
*) òàê æå, áóäüòå âíèìàòåëüíû. Åñëè Âû áóäåòå èñïîëüçîâàòü íóëü-ìîäåìíûé êàáåëü, òî â ñõåìå 2 è 3 êîíòàêòû íóæíî ïîìåíÿòü ìåñòàìè. Ïîòîìó êàê, ñõåìà ðàçðàáîòàíà äëÿ ïîäêëþ÷åíèÿ ÑÐÀÇÓ ê êîìó ðåñèâåðà.
Íà âñÿêèé ñëó÷àé, ðàñïàéêà êîíòàêòîâ íóëü-ìîäåìà:
2 - RxD - 3
3 - TxD - 2
5 - GND - 5

 ëîãå ïîðò ó òåáÿ íà ìåñòå

PHP Code:

---

Jan  1 02:00:01 kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
Jan  1 02:00:01 kernel: ttyS01 at 0xb8000400 (irq = 3) is a 16550A 


---

ÍDD ïîäëþ÷åí?  ëîãå åãî íå âèäíî.

---

íåò íå ïîäêëþ÷åí

âîò ÷òî âûäà¸ò ïóòòè

Code:

---

Decompressing..........done


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Jan 28 10:52:32 CST 2008 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.31.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes

Total memory used by CFE:  0x80400000 - 0x80497FF0 (622576)
Initialized Data:          0x8042F370 - 0x80431830 (9408)
BSS Area:                  0x80431830 - 0x80431FF0 (1984)
Local Heap:                0x80431FF0 - 0x80495FF0 (409600)
Stack Area:                0x80495FF0 - 0x80497FF0 (8192)
Text (code) segment:      0x80400000 - 0x8042F370 (193392)
Boot area (physical):      0x00498000 - 0x004D8000
Relocation Factor:        I:00000000 - D:00000000

Device eth0:  hwaddr 90-E6-BA-55-24-EB, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: TFTP Server.
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 5320 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000

---

âîò ñõåìà ìîåãî com