MF627

Printable View

Show 40 post(s) from this thread on one page

03-06-2009, 19:50
oleg71

Quote:

Originally Posted by sorine

Äà âñå äîâîëüíî ïðîñòî.
Vendor ID è Product ID ïðîïèñûâàòü íå íàäî. Îíè óæå åñòü â äðàéâåðå option. È ïîðòû ìîäåìà ïîäíèìóòñÿ ñàìè.
Âîçüìèòå ìîþ ïðîøèâêó 310 http://rapidshare.de/files/47370751/...s.tar.bz2.html Ýòà ïðîøèâêà ïîäîéäåò è äëÿ âàøåãî WL500gP V2 è òàì óæå åñòü option äðàéâåð â ïðîøèâêå.
Ìîæåòå èñïîëüçîâàòü è ìîé ñêðèïò ïîäêëþ÷åíèÿ êîòîðûé îïèñàí âìåñòå ñ ïðîøèâêîé â àðõèâå, à ìîæåòå è ñäåëàòü ñâîé ñêðèïò ïîäêëþ÷åíèÿ, òàêîé æå êàê è áûë ó âàñ. Òîëüêî âìåñòî

insmod usbserial vend=xxxxx prod=xxxxxx maxSize=xxxx

ïðîïèøèòå

insmod usbserial
insmod option

Ïîøèë òâîåé ïðîøåé, çàðàáîòàëî äàæå ñ modem.sh ! Èíåò åñòü, íî íåò usb hdd :D
Äà ÷òî æ òàêîå?

Code:

[admin@asus /]$ df -h Filesystem Size Used Available Use% Mounted on /dev/root 3.0M 3.0M 0 100% / tmpfs 14.8M 196.0K 14.6M 1% /tmp [admin@asus /]$

Code:

[admin@asus /]$ fdisk -l Disk /dev/scsi/host0/bus0/target0/lun0/disc: 1018 MB, 1018691584 bytes 30 heads, 29 sectors/track, 2286 cylinders Units = cylinders of 870 * 512 = 445440 bytes Device Boot Start End Blocks Id System /dev/scsi/host0/bus0/target0/lun0/part1 1 288 125265+ 82 Linux swap /dev/scsi/host0/bus0/target0/lun0/part2 289 2286 869130 83 Linux Disk /dev/scsi/host1/bus0/target0/lun0/disc: 30.0 GB, 30005821440 bytes 64 heads, 32 sectors/track, 28615 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Device Boot Start End Blocks Id System /dev/scsi/host1/bus0/target0/lun0/part1 1 1954 2000880 83 Linux /dev/scsi/host1/bus0/target0/lun0/part2 1955 28615 27300864 83 Linux [admin@asus /]$

fstab

Code:

/dev/scsi/host0/bus0/target0/lun0/part1 none swap sw 0 0 /dev/scsi/host0/bus0/target0/lun0/part2 /opt ext3 rw,noatime 1 1 /dev/scsi/host1/bus0/target0/lun0/part1 /tmp/mnt/disc1_1 ext3 rw,noatime 1 1 /dev/scsi/host1/bus0/target0/lun0/part2 /tmp/mnt/disc1_2 ext3 rw,noatime 1 1

êîìàíäà mount

Code:

[admin@asus /]$ mount rootfs on / type rootfs (rw) /dev/root on / type squashfs (ro) none on /dev type devfs (rw) proc on /proc type proc (rw) tmpfs on /tmp type tmpfs (rw,noatime) usbfs on /proc/bus/usb type usbfs (rw) [admin@asus /]$

Code:

[admin@asus /]$ ls bin etc lib mnt proc tmp var dev home linuxrc opt sbin usr www [admin@asus /]$

:confused:
äåëàë ïî èíñòðóêöèè http://wl500g.info/showthread.php?t=18096
:confused:
Äà ãäå æ ÿ îïÿòü íàêîñÿ÷èë ? :eek:
04-06-2009, 05:38
oleg71

Íó íà÷àëî êîëáàñèòü, êàê ðàíüøå :D

Óòðîì ìîäåì âèñèò (ãîðèò) - ïåðåäåðãèâàíèå íå ïîìîãàåò,
âèäèìî íóæíî ìåíÿòü ñêðèïò modem.sh ïîä ïðîâåðêó ñâÿçè êàê
ýòî áûëî ó íàñ â post-boot...

Âûëîæèòå, ïîæàëóéñòà îòäåëüíûì ôàéëîì modem.sh èç 310Ì ïðîøèâêè,
ÿ ñ íèì (ïîêà íà ðàáîòå) ïîèãðàþñü :) áóäó ñêðåùèâàòü ñ ïðîâåðåíûì post-boot (from Dimcho) ;)

Ðàáîòàåò option îïðåäåëÿåòñÿ ìîäåì, âñå íîðìàëüíî...
â÷åðà ïîëíî÷íî íè ôëåøêó (âíóòðè ìîäåìà) íè usb hdd òàê ïîäêëþ÷èòü
íå ñìîã :confused: áóäó äàëüøå ðàçáèðàòüñÿ, õîòÿ ñ íóëÿ óæå íàñòðàèâàë
ðàç äåñÿòü... Ìîæåò åñòü êàêèå-òî íþàíñû ïðîøèâêè 310-é, à âû ìîë÷èòå?
:rolleyes:

Êñòàòè, ïîñëå ïåðåïðîøèâêè íà 310Ì-þ ñêîðîñòü ïî÷åìó-òî ïîäïðûãíóëà
äî 2,3-2,6 Ìáèò, à ðàíüøå íà 308-é è íèæå áîëüøå 1,5 íèêîãäà íå íàáëþäàë ;)
04-06-2009, 06:40
sorine

Quote:

Originally Posted by oleg71

Íó íà÷àëî êîëáàñèòü, êàê ðàíüøå :D

Óòðîì ìîäåì âèñèò (ãîðèò) - ïåðåäåðãèâàíèå íå ïîìîãàåò,
âèäèìî íóæíî ìåíÿòü ñêðèïò modem.sh ïîä ïðîâåðêó ñâÿçè êàê
ýòî áûëî ó íàñ â post-boot...

Âûëîæèòå, ïîæàëóéñòà îòäåëüíûì ôàéëîì modem.sh èç 310Ì ïðîøèâêè,
ÿ ñ íèì (ïîêà íà ðàáîòå) ïîèãðàþñü :) áóäó ñêðåùèâàòü ñ ïðîâåðåíûì post-boot (from Dimcho) ;)

Ðàáîòàåò option îïðåäåëÿåòñÿ ìîäåì, âñå íîðìàëüíî...
â÷åðà ïîëíî÷íî íè ôëåøêó (âíóòðè ìîäåìà) íè usb hdd òàê ïîäêëþ÷èòü
íå ñìîã :confused: áóäó äàëüøå ðàçáèðàòüñÿ, õîòÿ ñ íóëÿ óæå íàñòðàèâàë
ðàç äåñÿòü... Ìîæåò åñòü êàêèå-òî íþàíñû ïðîøèâêè 310-é, à âû ìîë÷èòå?
:rolleyes:

Êñòàòè, ïîñëå ïåðåïðîøèâêè íà 310Ì-þ ñêîðîñòü ïî÷åìó-òî ïîäïðûãíóëà
äî 2,3-2,6 Ìáèò, à ðàíüøå íà 308-é è íèæå áîëüøå 1,5 íèêîãäà íå íàáëþäàë ;)

Îøèáî÷êà çàêðàëàñü â 310. Âûêëþ÷åíû ìîäóëè íàêîïèòåëåé â ÿäðå. Ñêîðî èñïðàâëþ è âûëîæó.
04-06-2009, 06:47
oleg71

Quote:

Originally Posted by sorine

Îøèáî÷êà çàêðàëàñü â 310. Âûêëþ÷åíû ìîäóëè íàêîïèòåëåé â ÿäðå. Ñêîðî èñïðàâëþ è âûëîæó.

Ôóõ,... à ÿ óæå çàíåðíè÷àë :D
ñïàñèáî, ïîäîæäåì... íî íå äîëãî, ïîæàëóéñòà :)

PS modem.sh êèíüòå êòî-íèáóäü!
04-06-2009, 07:30
sorine

Quote:

Originally Posted by oleg71

Ôóõ,... à ÿ óæå çàíåðíè÷àë :D
ñïàñèáî, ïîäîæäåì... íî íå äîëãî, ïîæàëóéñòà :)

PS modem.sh êèíüòå êòî-íèáóäü!

Îáíîâèë ïðîøèâêó
http://rapidshare.de/files/47411511/...x.tar.bz2.html
cat /usr/sbin/modem.sh è âû óâèäèòå ñêðèïò.
04-06-2009, 07:48
Wolfgun

Quote:

Originally Posted by sorine

Îáíîâèë ïðîøèâêó
http://rapidshare.de/files/47411511/...x.tar.bz2.html
cat /usr/sbin/modem.sh è âû óâèäèòå ñêðèïò.

ÍÓ âñåæå ïëç. âûëîæèòå ñêðèïò ñêðèïò
ó ìåíÿ wl500gp òàê ÷òî ïðîøèâêà íå ïîäîéäåò :)
04-06-2009, 07:52
oleg71

Quote:

Originally Posted by sorine

Îáíîâèë ïðîøèâêó
http://rapidshare.de/files/47411511/...x.tar.bz2.html
cat /usr/sbin/modem.sh è âû óâèäèòå ñêðèïò.

Ñïàñèáî!
Íî,
Äà íå óâèæó ÿ äî ïîçäíåãî âå÷åðà, à ïîïðàâèòü ïîä ñåáÿ ñåé÷àñ õîòåë!

Â÷åðà ïðè ïîïûòêå vi /usr/sbin/modem.sh
ïèøåò, ÷òî [ReadOnly] èëè ýòî êàê åãî èçìåíèòü?
04-06-2009, 11:31
Dimcho

cat /usr/sbin/modem.sh

Code:

#!/bin/sh kill -9 $(ps|grep pppd|awk -F' ' '{print $1}') 2>/dev/null mkdir /tmp/ppp/ mkdir /tmp/ppp/peers/ apn=$(nvram get apn) dialnumber=$(nvram get dialnumber) modem=$(nvram get modem) username=$(nvram get username) port=$(nvram get port) portspeed=$(nvram get portspeed) password=$(nvram get password) vend=$(nvram get vend) prod=$(nvram get prod) mtu=$(nvram get mtu) mru=$(nvram get mru) atinit=$(nvram get atinit) if [ "$vend" == "" -o "$prod" == "" ]; then insmod acm insmod usbserial insmod option insmod pl2303 insmod ftdi_sio else insmod usbserial vendor=$vend product=$prod maxSize=4096 fi sleep 15 usbdev=$(cat /proc/bus/usb/devpath | grep -o "/.*" | awk -F 'm' '{print $1}') echo "'' ''" > /tmp/ppp/peers/cdma.chat echo "'' 'ATZ'" >> /tmp/ppp/peers/cdma.chat echo "$atinit" >> /tmp/ppp/peers/cdma.chat echo "'OK' 'ATDT#777'" >> /tmp/ppp/peers/cdma.chat echo "'CONNECT' ''" >> /tmp/ppp/peers/cdma.chat echo "'' ''" > /tmp/ppp/peers/gprs.chat echo "'' 'ATZ'" >> /tmp/ppp/peers/gprs.chat echo "$atinit" >> /tmp/ppp/peers/cdma.chat echo "'' 'AT+CGDCONT=1,\"IP\",\"$apn\"'" >> /tmp/ppp/peers/gprs.chat echo "'OK' 'ATD$dialnumber'" >> /tmp/ppp/peers/gprs.chat echo "'CONNECT' ''" >> /tmp/ppp/peers/gprs.chat echo "debug" > /tmp/ppp/peers/$modem if [ "$usbdev" == "/dev/usb/ac" ]; then echo "/dev/usb/acm/$port" >> /tmp/ppp/peers/$modem else echo "/dev/usb/tts/$port" >> /tmp/ppp/peers/$modem fi echo "$portspeed" >> /tmp/ppp/peers/$modem echo "crtscts" >> /tmp/ppp/peers/$modem echo "noipdefault" >> /tmp/ppp/peers/$modem echo "ipcp-accept-local" >> /tmp/ppp/peers/$modem echo "lcp-echo-interval 60" >> /tmp/ppp/peers/$modem echo "lcp-echo-failure 6" >> /tmp/ppp/peers/$modem echo "mtu $mtu" >> /tmp/ppp/peers/$modem echo "mru $mru" >> /tmp/ppp/peers/$modem echo "usepeerdns" >> /tmp/ppp/peers/$modem echo "noauth" >> /tmp/ppp/peers/$modem echo "nodetach" >> /tmp/ppp/peers/$modem echo "persist" >> /tmp/ppp/peers/$modem echo "user '$username'" >> /tmp/ppp/peers/$modem echo "password '$password'" >> /tmp/ppp/peers/$modem echo "connect \"/usr/sbin/chat -s -S -V -t 60 -f /tmp/ppp/peers/$modem.chat 2>/tmp/chat.log\"" >> /tmp/ppp/peers/$modem pppd call $modem >> /tmp/chat.log
04-06-2009, 11:42
oleg71

Îõ óæ ýòà óíèâåðñàëüíîñòü!

Òå æå ÿãîäû íî â ïðîôèëü :)

Òóò ÷òî ïîñòîÿííî ïåðåïèñûâàþòñÿ ôàéëû

Code:

echo "'' ''" > /tmp/ppp/peers/cdma.chat echo "'' 'ATZ'" >> /tmp/ppp/peers/cdma.chat echo "$atinit" >> /tmp/ppp/peers/cdma.chat echo "'OK' 'ATDT#777'" >> /tmp/ppp/peers/cdma.chat echo "'CONNECT' ''" >> /tmp/ppp/peers/cdma.chat echo "'' ''" > /tmp/ppp/peers/gprs.chat echo "'' 'ATZ'" >> /tmp/ppp/peers/gprs.chat echo "$atinit" >> /tmp/ppp/peers/cdma.chat echo "'' 'AT+CGDCONT=1,\"IP\",\"$apn\"'" >> /tmp/ppp/peers/gprs.chat echo "'OK' 'ATD$dialnumber'" >> /tmp/ppp/peers/gprs.chat echo "'CONNECT' ''" >> /tmp/ppp/peers/gprs.chat echo "debug" > /tmp/ppp/peers/$modem if [ "$usbdev" == "/dev/usb/ac" ]; then echo "/dev/usb/acm/$port" >> /tmp/ppp/peers/$modem else echo "/dev/usb/tts/$port" >> /tmp/ppp/peers/$modem fi echo "$portspeed" >> /tmp/ppp/peers/$modem echo "crtscts" >> /tmp/ppp/peers/$modem echo "noipdefault" >> /tmp/ppp/peers/$modem echo "ipcp-accept-local" >> /tmp/ppp/peers/$modem echo "lcp-echo-interval 60" >> /tmp/ppp/peers/$modem echo "lcp-echo-failure 6" >> /tmp/ppp/peers/$modem echo "mtu $mtu" >> /tmp/ppp/peers/$modem echo "mru $mru" >> /tmp/ppp/peers/$modem echo "usepeerdns" >> /tmp/ppp/peers/$modem echo "noauth" >> /tmp/ppp/peers/$modem echo "nodetach" >> /tmp/ppp/peers/$modem echo "persist" >> /tmp/ppp/peers/$modem echo "user '$username'" >> /tmp/ppp/peers/$modem echo "password '$password'" >> /tmp/ppp/peers/$modem

ìîæåò èõ (äëÿ êàæäîãî êîíêðåòíîãî ìîäåìà, ò.å. äëÿ ñåáÿ)
ñäåëàòü ïîñòîÿííûìè?
04-06-2009, 14:15
Dimcho

Òàê modem.sh íàäî çàïóñêàòü òîëüêî îäèí ðàç ïî èäåå.
Âîò ó ëþäåé è âîçíèêàþò ïîòîì ïðîáëåìû ïî òèïó pppd íå çàïóñêàåòñÿ/îñòàíàâëèâàåòñÿ êîãäà îíè èõ øòóê 10 çàïóñòÿò.
04-06-2009, 14:33
oleg71

Quote:

Originally Posted by Dimcho

Òàê modem.sh íàäî çàïóñêàòü òîëüêî îäèí ðàç ïî èäåå.
Âîò ó ëþäåé è âîçíèêàþò ïîòîì ïðîáëåìû ïî òèïó pppd íå çàïóñêàåòñÿ/îñòàíàâëèâàåòñÿ êîãäà îíè èõ øòóê 10 çàïóñòÿò.

Òàê àâòîð ïèøåò, ÷òî åãî â àâòîçàãðóçêó ñòàâèòü íàäî.
âîò îí ïðè êàæäîé ïåðåçàãðóçêå è áóäåò ïåðåïèñûâàòü êàòàëîãè è ôàéëû,
à êàòàëîãè íå äàäóòñÿ ïåðåïèñàòü, îí íà íèõ è âèñíåò...
õîòÿ ÿ ïðîáîâàë - ïîñòàâèë â àâòîçàãðóçêó- òàê îí ðàáîòàë :eek:
- íè÷åãî íå ïîíèìàþ... (íå õèõèêàòü!) :D
04-06-2009, 15:41
Dimcho

Íó åñëè ïîñëå ïåðåçàãðóçêè åãî îäèí ðàç çàïóñêàòü òî áóäåò ðàáîòàòü. ;)
Åñëè åãî è ïðàâèëüíî çàâåðøàòü òî òîæå áóäåò ðàáîòàòü. ;)
Îí æå íå âî âëåøêå ôàéëû ñîçäà¸ò, ïîñëå ïåðåçàãðóçêè èõ íåòó.
Îñòà¸òñÿ òîëüêî post-boot è .files
Â èíñòðóêöèè òàê è íàïèñàíî:
"Ïðè óñïåøíîì çàïóñêå ñêðèïòà ìîæíî ñäåëàòü àâòîìàòè÷åñêèé çàïóñê ñêðèïòà ïîñëå ïåðåçàãðóçêè ââåäÿ êîìàíäû:"

PHP Code:

mkdir /usr/local/sbin echo "#!/bin/sh" > /usr/local/sbin/post-boot echo "modem.sh" >> /usr/local/sbin/post-boot chmod +x /usr/local/sbin/post-boot echo "/usr/local/sbin/post-boot" > /usr/local/.files flashfs enable flashfs save flashfs commit reboot

À âîò åñëè "ïîñëå ïåðåçàãðóçêè" íå äåëàòü òî ïîëó÷àþòñÿ ó ëþäåé òðàáëû ïîòîì :confused:
04-06-2009, 17:34
oleg71

1 Attachment(s)

Âîîáùåì ïåðåïðîøèë è ñäåëàë ïî-íàøåìó!
ðàáîòàåò, ñêîðîñòü îäíîçíà÷íî âûøå, ÷åì íà 308-é.
Dimcho -> ïîñìîòðè ôàéëû, ìîæåò ïåðåäåëàòü modem.sh ïîä íèõ,
èëè èõ ïîä íåãî?:)?
04-06-2009, 17:51
Dimcho

Äà çàáóäüòå Âû ïðî modem.sh. :D
Ó Âàñ è òàê âñ¸ ðàáîòàåò. ;)
Êîìó íàäî, âïîëíå ìîãóò âáèòü Âàøè ñêðèïòû â ñâîé ðîóòåð, áëàãî èíôû êàê ñäåëàòü íà ýòîì ôîðóìå ïðåäîñòàòî÷íî.
04-06-2009, 19:11
oleg71

Quote:

Originally Posted by Dimcho

Äà çàáóäüòå Âû ïðî modem.sh. :D
Ó Âàñ è òàê âñ¸ ðàáîòàåò. ;)
Êîìó íàäî, âïîëíå ìîãóò âáèòü Âàøè ñêðèïòû â ñâîé ðîóòåð, áëàãî èíôû êàê ñäåëàòü íà ýòîì ôîðóìå ïðåäîñòàòî÷íî.

Äà òî÷íî, õâàòèò!
áóäåì ïîñòîÿòü â ñïîêîéâñòâèè è îùóùåíèè... :D
Î÷åíü òåáå áëàãîäàðåí çà ïîìîùü è íàäåþñü íà äàëüíåéøåå
îáñóæäåíèå è îáùåíèå :)

Show 40 post(s) from this thread on one page