Printable View
ipkg install cron
Package cron (4.1-8) installed in /opt/ is up to date.
Configuring cron
Remember that the system crontab file is "/opt/etc/crontab".
usage: /opt/etc/init.d/S10cron (start|stop)
postinst script returned status 1
ERROR: cron.postinst returned 1
Nothing to be done
Successfully terminated.
Later edit: removed cron, install again, now working
thank you for support
Hello all,
I am not able to run any programs installed by ipkg. I can see the program files in /opt/bin and /opt/sbin, and can 'cat' their contents, or copy them to other places, but whenever I try to execute one of them, sh returns a 'not found' message.
This is on a WL-500gPv2, running firmware version 1.9.2.7-rtn-r3073 which I built from source. I made one small modification to the source to change a few parameters that get passed to pppd, but that is the only change I made. opt is mounted from a USB disc, and appears to be working fine in all other respects.Code:[admin@WL500 sbin]$ pwd
/opt/sbin
[admin@WL500 sbin]$ ls -al
drwxr-xr-x 2 admin root 4096 Jul 13 10:39 .
drwxr-xr-x 11 admin root 4096 Nov 13 2010 ..
-rwxr-xr-x 1 admin root 72168 Oct 20 2010 cron
-rwxr-xr-x 1 admin root 373004 Dec 1 2010 privoxy
[admin@WL500 sbin]$ cron
-sh: cron: not found
[admin@WL500 sbin]$ ./cron
-sh: ./cron: not found
Any thoughts ?
sounds like an uclibc problem.
Have you installed uclibc from optware?:)
Hi at all.
I've the WL500GP and followed the tutorial to install and configure Oleg firmware. Installed Transmission and uShare. It has worked perfectly for a couple of years, until my last firmware update with 1.9.2.7-rtn-r3300. After that (i suppose) a cannot access any more to transmission web gui at http://192.168.1.1:9091/transmission/web/ and the same for uShare. The HD is still accessible from the PC and the folder of transmission are still there.
Any suggestion? I installed a wrong version of firmware?
Thank you
Hi,
just a guess.
Try "netstat -tulpen" in the shell and have a look if there is anything listening on these ports.
wengi
Hi, and thank you for your answerQuote:
Originally Posted by wengi
If -tulpen is -t the answer is:
tcp 378 0 WL-001E8C2D280C:netbios-ssn 192.168.1.195:49314 ESTABLISHED
tcp 0 211 ::ffff:192.168.1.1:telnet ::ffff:192.168.1.195:49359 ESTABLISHED
were 192.168.1.195 is my pc
Hi,
i really meant "-tulpen".
Unfortunately i do not have an asus router any more, so i have no idea which switches are supported.
The most important one is -ln (for listening, numeric) which lists all active ports.
Try -l and look if e.g. 9091 for transmission is listed.
wengi
Hy wengy, this is the report of netstat -l
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 WL-001E8C2D280C:netbios-ssn 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:www 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:ftp 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:domain 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:5431 0.0.0.0:* LISTEN
tcp 0 0 :::laserjet :::* LISTEN
tcp 0 0 :::domain :::* LISTEN
tcp 0 0 :::telnet :::* LISTEN
udp 0 0 WL-001E8C2D280C:netbios-ns 0.0.0.0:*
udp 0 0 0.0.0.0:netbios-ns 0.0.0.0:*
udp 0 0 WL-001E8C2D280C:netbios-dgm 0.0.0.0:*
udp 0 0 0.0.0.0:netbios-dgm 0.0.0.0:*
udp 0 0 localhost.localdomain:34954 0.0.0.0:*
udp 0 0 0.0.0.0:domain 0.0.0.0:*
udp 0 0 0.0.0.0:bootps 0.0.0.0:*
udp 0 0 0.0.0.0:upnp 0.0.0.0:*
udp 0 0 :::domain :::*
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
nothing with 9091....
and this is the help for netstat
Usage: netstat [-ral] [-tuwx] [-en]
Display networking information
Options:
-r Routing table
-a All sockets
-l Listening sockets
Else: connected sockets
-t TCP sockets
-u UDP sockets
-w Raw sockets
-x Unix sockets
Else: all socket types
-e Other/more information
-n Don't resolve names
Hi,
transmission is not running.
try "/opt/etc/init.d/rc.unslung start" and have a look with "netstat -ln".
If there is still no port 9091 try "/opt/etc/init.d/S90transmission-daemon start" and again have a look with netstat.
If transmission is still not running:
Verify the content of /opt/etc/init.d/S90transmission-daemon with my howto and make shure it is executable (chmod 750).
Have a look at /opt/var/log/syslog.log. Are there any errors on transmission?
wengi
Thank's for your help but probably some scripts are corrupted and transmission in not running, i can't find also IPKG so i think that the best to do is to format the first 2 partitions and follow your tutorial again. I wouldn't want to loose all the files stored in the 3 partition so i will try to do everityng again without touching this partition...
Thank you
Hey guys,
Can someone please help with gcc for oleg WL500gpv2-1.9.2.7-10. I've been trying to find something but without success.
Thanks
LE: "ipkg install buildroot" solved the issue
Hi Wengi. I've realized that the new firmware has changed the name of the disks and maybe this is the problem of the old configuration that is not working. When i upgraded the firmware i noticed that the shared disks where not any more disc_2 or disc_3 but thay changed in disca_2 and disca_3. Now, after formatting and partitioning (with ecaddict tutorial) the result of df is
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 4608 4608 0 100% /
devfs 14524 4 14520 0% /dev
tmpfs 14524 220 14304 2% /tmp
/dev/discs/disca/part3
479478560 32812 455471820 0% /tmp/mnt/disca_3
/dev/discs/disca/part2
987032 16412 921272 2% /tmp/mnt/disca_2
Looking at your tutorial in the scripts you refer to disc not to disca in edit of fstab and in other places
#device Mountpoint FStype Options Dump Pass#
/dev/discs/disc0/part1 none swap sw 0 0
/dev/discs/disc0/part2 /opt ext3 rw,noatime 1 1
/dev/discs/disc0/part3 /tmp/harddisk ext3 rw,noatime 1 1
..can be this the problem? Was the firmware to make this change or was my fault?
rtn firmware with kernel 2.6 instead of kernel 2.4 uses disca, discb etc.Quote:
Originally Posted by tex
so no it's not your fault, but it's easy to change in fstab.
added this to the news.
Will update the tut later.
thanks for the hint
wengi
Hi Wengi, i reconfigured everyting with this new information and transmission worked perfectly. After i tried to install Samba3 following this instructions
killall smbd nmbd
cd /opt/etc/samba && [ ! -f smb.conf.raas ] && cp smb.conf smb.conf.raas
ipkg remove samba2
ipkg install samba samba3-swat
sed -i 's/samba_active=0/samba_active=1/' /opt/etc/init.d/S08samba
cd /mnt && wget -O smb.tar.gz "http://wl500g.info/attachment.php?attachmentid=6455&d=1274467707" && cd / && tar -xvzf /mnt/smb.tar.gz
/opt/etc/init.d/S08samba start
/bin/ps | grep smbd
but now i cannot see the HD from the win PC connected to the router. But the important is that the previous error was solved! I'll do again the procedure avoidind the last step of samba 3 and living the origional samba from the router.
This thread makes everything seem very easy... thank you so much for sharing this tutorial!
I'm in the process of installing the Oleg firmware on my WL-500gP router. Nonetheless, I would like to make sure that I will be able to revert to the original Asus firmware anytime.
Can you please tell me if it is possible to move from Oleg to Original Asus firmware? And if so, which are the steps for that process?
Wengi, sorry but you wrote :"you have to replace all occurances of "disc" with "disca" in this tutorial!!!!
The correct should be "disc0" with "disca"
Is what i've done and is working
Torrent is starting and working but i can't access to my HD from my PC. I try before with integrated samba (not working). After i followed your tutorial for IPKG samba but at the end i couldn't access to configuration port 901 from web interface. So i tryed to follow the Start samba with xinetd (changing disc0 with diska when nedeed) but at the end of "echo "/etc/smb.conf" >> /usr/local/.files && flashfs save && flashfs commit && flashfs enable" i get the following error tar: /etc/smb.conf: No such file or directory
tar: /etc/smb.conf: No such file or directory
tar: /etc/smb.conf: No such file or directory
tar: error exit delayed from previous errors
Can you please help me to fix this problems?
Thank you
Ups :-(Quote:
Originally Posted by tex
Now it is disc0....
Regarding samba i have no idea at the moment. Sorry.
I can not test it because i do not have any asus routers any more...
wengi
You can easly go from Oleg firmware to the original one (download the file from the ASUS support page http://www.asus.com/Networks/Wireles...mium/#download) in the Firmware Update page of the Oleg web-page in system setup.Quote:
Originally Posted by nfh
Does anybody have the ZTE MF820 working?
I have the newest firmware from googlecode and it can find the modem perfectly.
I just can't get it to connect to the internet.
It's saying that the script has failed in the usb ppp log.
Can anybody give me an idea on where to fix it?
Thanks anyways for the nice piece of software and the nice forum. :)
My transmission-daemon stopped working after I updated firmware and ipkg.
It runs only withafter reboot,it does not start automatically.Code:/opt/etc/init.d/S90transmission-daemon start
I triedbut got nothing.So far got no problems with this.Code:flashfs save && flashfs commit && flashfs enable && reboot
asus 500gp v2
has gone too far imho...Code:flashfs save && flashfs commit && flashfs enable && reboot
do you know what you do with this? you save the current state of the flashfs. My point is, you didn't change anything on your flashfs... you only updated your optware, on your harddrive.
So remember:
will do the trick just fine to restart your router:DCode:reboot
anyway, what version are you running?
transmission 2.42-1 I think?Quote:
ipkg list_installed | grep transmission
I'm not sure since when you've been using the setup of wengi... transmission has been updated to a whole new version since... like 2 years back or so.
which means: different configuration file.
what happens when you execute:
where /tmp/harddisk/transmission/config is the configuration folderQuote:
/opt/bin/transmission-daemon -fg /tmp/harddisk/transmission/config
it should give us some information on what transmission doesn't like:)
Maybe this ist the disc0/disca problem.Quote:
Originally Posted by dare023
Have al look at the news at first post.
wengi
gives thisCode:ipkg list_installed | grep transmission
Code:transmission - 2.42-1 - Lightweight BitTorrent client and daemon, with web interface bundled.
gives thisCode:/opt/bin/transmission-daemon -fg /tmp/harddisk/transmission/config
Code:[admin@WL-0022156817F1 root]$ /opt/bin/transmission-daemon -fg /tmp/harddisk/transmission/config
Transmission 2.42 (13013) http://www.transmissionbt.com/
A fast and easy BitTorrent client
transmission-daemon is a headless Transmission session
that can be controlled via transmission-remote
or the web interface.
Usage: transmission-daemon [options]
Options:
-h --help Display this help page and exit
-a --allowed <list> Allowed IP addresses. (Default:
127.0.0.1)
-b --blocklist Enable peer blocklists
-B --no-blocklist Disable peer blocklists
-c --watch-dir <directory> Where to watch for new .torrent files
-C --no-watch-dir Disable the watch-dir
--incomplete-dir <directory> Where to store new torrents until
they're complete
--no-incomplete-dir Don't store incomplete torrents in a
different location
-d --dump-settings Dump the settings and exit
-e --logfile <filename> Dump the log messages to this filename
-f --foreground Run in the foreground instead of
daemonizing
-g --config-dir <path> Where to look for configuration files
-p --port <port> RPC port (Default: 9091)
-t --auth Require authentication
-T --no-auth Don't require authentication
-u --username <username> Set username for authentication
-v --password <password> Set password for authentication
-V --version Show version number and exit
--log-error Show error messages
--log-info Show error and info messages
--log-debug Show error, info, and debug messages
-w --download-dir <path> Where to save downloaded data
--paused Pause all torrents on startup
-o --dht Enable distributed hash tables (DHT)
-O --no-dht Disable distributed hash tables (DHT)
-y --lpd Enable local peer discovery (LPD)
-Y --no-lpd Disable local peer discovery (LPD)
--utp Enable uTP for peer connections
--no-utp Disable uTP for peer connections
-P --peerport <port> Port for incoming peers (Default:
51413)
-m --portmap Enable portmapping via NAT-PMP or UPnP
-M --no-portmap Disable portmapping
-L --peerlimit-global <limit> Maximum overall number of peers
(Default: 240)
-l --peerlimit-torrent <limit> Maximum number of peers per torrent
(Default: 60)
-er --encryption-required Encrypt all peer connections
-ep --encryption-preferred Prefer encrypted peer connections
-et --encryption-tolerated Prefer unencrypted peer connections
-i --bind-address-ipv4 <ipv4 addr> Where to listen for peer connections
-I --bind-address-ipv6 <ipv6 addr> Where to listen for peer connections
-r --rpc-bind-address <ipv4 addr> Where to listen for RPC connections
-gsr --global-seedratio ratio All torrents, unless overridden by a
per-torrent setting, should seed until
a specific ratio
-GSR --no-global-seedratio All torrents, unless overridden by a
per-torrent setting, should seed
regardless of ratio
-x --pid-file <pid-file> Enable PID file
No,I changed that - here is my fstabQuote:
Maybe this ist the disc0/disca problem.
Allready tried reinstalling transmision,and still not working.Code:ce Mountpoint FStype Options Dump Pass#
/dev/discs/disca/part1 none swap sw 0 0
/dev/discs/disca/part2 /opt ext3 rw,noatime 1 1
/dev/discs/disca/part3 /tmp/harddisk ext3 rw,noatime 1 1
And I was udpating since install,but only ipkg,not a firmware.
As for rebooting,since reboot give me nothing ,tried this..
And something more,I there is no errors when starting daemon.
Mod: please don't quote a giant piece of text from the previous post, thanks
Did you change also in the swap "mkswap /dev/discs/disc0/part1
swapon /dev/discs/disc0/part1" ???
If this is not the problem try to put everything like it was before upgrading the firmware (change again fstab to disc0) and then install this version of firmware 1.9.2.7-d-r2624 that uses kernel 2.4.
If this doesn't work i'll tell you how i fixed this problem!!
This shows that swap is activated?
Thank you for your help,can we try to solve this without flashing again?Code:[admin@WL-0022156817F1 root]$ free
total used free shared buffers cached
Mem: 29056 25232 3824 0 3048 9384
-/+ buffers/cache: 12800 16256
Swap: 4120632 0 4120632
Thanks in advance.
Code:[admin@WL-0022156817F1 root]$ fdisk -l
Disk /dev/sda: 250.0 GB, 250059292672 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 513 4120641 82 Linux swap
/dev/sda2 514 638 1004062+ 83 Linux
/dev/sda3 639 30401 239071297+ 83 Linux
Code:[admin@WL-0022156817F1 root]$ df -l
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 4608 4608 0 100% /
/dev/root 4608 4608 0 100% /
devfs 100 4 96 4% /dev
tmpfs 14528 212 14316 2% /tmp
/dev/discs/disca/part2
988244 362332 575712 39% /opt
/dev/discs/disca/part3
235320192 165736 223200892 1% /tmp/mnt/disca_3
I've had your problem one month ago...after a firmware upgrade transmission was not working any more, i coudn't access to web page . Not only transmission was not running but also ipkg was not working and i supposed that something was corrupted in the opt disc. So i formatted everything and started again the wengi tutorial from the beginning (not working as well...). After i've noticed that was changed the name of the shared disc from disc0 to discA and WPTE said that the new firmware is based on Kernel 2.6 that changes the name of the disc. But at that point i had already formatted everything so i made again the tutorial changing all the parts with disc_0 to disc_a and all worked properly except the fact that i couldn't get samba working...i had transmission working, access to web page, loading torrent, but i coudn't access to the shared folder from my PC (i tried samba from firmware, samba 2 and samba 3...nothing worked). So my solution has been that of installing the firmware with kernel 2.4, factory reset, formatting the HD again with the difference of mounting the 3th partition on /mnt instead of /tmp/harddisk and installed the Headstart II following the tutorial posted in this forum...after that i prevent the start of unnecessary (for me) services from /opt/etc/init.d/ renaming them (that's why my wl500 gp has not enough memory to run all of them) and finally i have got my transmission working and samba working too. BUT i think that this solution is much complicated and came from my unexperience on linux systems. that's why i suggested you to flash again your firmware to the version with kernel 2.4 and change only fstab again from disc_a to disk_0, leaving all the other settings and scripts as they where before...hope this can help you and sorry for too long post!
P.S. The only thing i don't understand in your df -l is the last line. In my system the last line is this:
Only /mnt. I'm not sure if disca_3 is correct there, but people more expert then me can give you more information on thatQuote:
[admin@hd asus root]$ df -l
Filesystem Size Used Avail Use% Mounted on
rootfs 3.0M 3.0M 0 100% /
/dev/root 3.0M 3.0M 0 100% /
tmpfs 15M 164K 15M 2% /tmp
/dev/discs/disc0/part2
16G 381M 15G 3% /opt
/dev/discs/disc0/part3
443G 16G 428G 4% /mnt
Well,I found another solution.
I just placed
inCode:#!/bin/sh
chmod 755 /opt/etc/init.d/S90transmission-daemon
/opt/etc/init.d/S90transmission-daemon start
and executedCode:/usr/local/sbin/post-mount
,just be shore.Code:chmod +x /usr/local/sbin/*
Transmission works now!
I guess that first line with chmod 775 was not necessary,but I dont want to experiment more.
I placed in post-mount to be shore that transmission will pick up settings and whatever needs to work.
Now I got newest firmware and transmission working just as before.
Hope this will be useful for somebody else.
Thanks for helping people! :)
Hy guys,
Can you please help me with mount an iso file. My current filesystem is:
[admin@home_router root]$ df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 3.0M 3.0M 0 100% /
/dev/root 3.0M 3.0M 0 100% /
/dev/discs/disc0/part2
16G 500M 15G 4% /opt
/dev/discs/disc0/part3
263G 46G 218G 18% /tmp/mnt/disc0_3
/dev/discs/disc0/part2
16G 500M 15G 4% /mnt
I want to do mount in /mnt/disk, something like this:
mount -o loop=/dev/loop/0 -t iso9660 myiso.iso /mnt/disk
and I get
mount: Mounting /dev/loop/0 on /mnt/disk failed: No such device
What do you think?
Hi wengi,
I have upgraded my wl-500gp to 1.9.2.7-rtn-r4645 firmware and I found out some strange things/behavior on my router. Please, could you explain. (I'm not a supper user, so sorry ahead if my questions are stupid)
When I check my mountpoints I get the following:
But when I want to view my fstab I get:Code:$ df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 4608 4608 0 100% /
/dev/root 4608 4608 0 100% /
devfs 100 4 96 4% /dev
tmpfs 14544 476 14068 3% /tmp
/dev/discs/disca/part3
740096 330020 372480 47% /tmp/mnt/disca_3
/dev/discs/disca/part2
986136 146768 789272 16% /tmp/mnt/disca_2
What is wrong? does the new FW store the mount commands somewhere else?Code:$ cat /etc/fstab
cat: can't open '/etc/fstab': No such file or directory
What are devfs and tmpfs?
I have also noticed that I lost all me scripts from folder
But my dropbear runs after every reboot.Code:/usr/local/sbin
How come?
Should I start over with setting up my router? How it is done?
Thanks for your help and support
if you switched from d-branch or older oleg-FW you should create a new fstab (remember new mountpoints!).
Your /usr/local/sbin scripts are lost too ^ :(
dropbear and many other nice stuff is already included in FW - it can be disabled via WebIF, don't mind :)
in general, as you are now using a modern FW with recent kernel you should also switch from optware to entware
http://code.google.com/p/wl500g-repo/wiki/Goal
if you miss some packages just inform us here
just rm -rf your /opt - but make backups of your conf-files as you may need them afterwards...
hf
btw. wengi is not using his wl500w anymore
Hi !gm,Quote:
Originally Posted by !gm
Thanks for your fast respond.
I'm still not so sure about one thing - How come my flashdisk gets mounted after reboot when my fstab is empty? How does the new FW do this trick? :-)
Thanks,
Tarik
I'm sure you have to read this forum carefully.Quote:
Originally Posted by trymyluck
First of all - it is possible to backup flashfs (of course, before firmware upgrade). Second, automount under /tmp/ works for years.
Moreover, fstab for 2.4 & 2.6 slightly differs.
Hi,
I had 1.9.2.7-10 installed and today I've decided to update to 1.9.2.7-rtn-r4667. When my router restarted it didn't mount my pen drive as usually in /opt.
I didn't remember how I configured my router to auto mount it so I followed this tutorial but it is not working. I don't think my startup scripts are being called because it doesn't mount swap and /opt but I can do it manually.
Sorry my bad english
Cumps!
please read, what we posted above
sorry, it was a stupid error.. I forgot replacing a "disc0" with "disca" in fstab...
But now I'm having a new problem... here is the log:
fstab:Code:Jan 1 00:00:20 e2fsck: /dev/discs/disca/part3:
Jan 1 00:00:20 e2fsck: The superblock could not be read or does not describe a correct ext2
Jan 1 00:00:20 e2fsck: filesystem. If the device is valid and it really contains an ext2
Jan 1 00:00:20 e2fsck: filesystem (and not swap or ufs or something else), then the superblock
Jan 1 00:00:20 e2fsck: is corrupt, and you might try running e2fsck with an alternate superblock:
Jan 1 00:00:20 e2fsck: e2fsck -b 8193 <device>
df:Code:#device Mountpoint FStype Options Dump Pass#
/dev/discs/disca/part1 none swap sw 0 0
/dev/discs/disca/part2 /opt ext3 rw,noatime 1 1
/dev/discs/disca/part3 /mnt ext3 rw,noatime 1 1
fdisk -l:Code:Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 4480 4480 0 100% /
/dev/root 4480 4480 0 100% /
devfs 100 4 96 4% /dev
tmpfs 14540 156 14384 1% /tmp
/dev/discs/disca/part2
985700 17648 917980 2% /opt
I've tried this http://linuxexpresso.wordpress.com/2...ock-in-ubuntu/ but it didn't workCode:Disk /dev/sda: 2097 MB, 2097152000 bytes
65 heads, 62 sectors/track, 1016 cylinders
Units = cylinders of 4030 * 512 = 2063360 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 249 501704 82 Linux swap
/dev/sda2 250 746 1001455 83 Linux
/dev/sda3 747 1016 544050 83 Linux
Thanks, cumps
run
and use one of the superblocks inCode:mke2fs -n /dev/discs/disca/part3
The e2fsck will run a long time on the router. I suggest you repair the filesystem on an other machine, by attaching the pen-drive there. The procedure is the same, but the device number may differ as you may have connected several pen-drives.Code:e2fsck -b [superblock-here] /dev/discs/disca/part3
good luck
gm
hi,
i have installed the latest firmware for wl500gp
i know about changes with disca
but i have a issue with opening a port
with vi I edit /usr/local/sbin/post-firewall and insert
iptables -I INPUT -m tcp -p tcp --dport 9091 -j ACCEPT
save in vi
flashfs save && flashfs commit && flashfs enable && reboot
after reboot I check open port with canyouseeme.org and receive error
what I do wrong?
please advise
10x