[HowTo] Install and configure Oleg's firmware

Printable View

Show 40 post(s) from this thread on one page

23-07-2008, 10:33
wengi

Simply start with 9b.
insert cron entry and edit logrotate.conf.
Thats it.

wengi
23-07-2008, 10:52
Tellus1

Do I have to edit the line
OPTIONS="-m 0 -O $LOG_NEW/$LOGFILE -S -l 7 -s 0"
to include those extra options I have now by default?
23-07-2008, 14:40
wengi

If you are talking about syslog startup file: yes.

wengi
24-07-2008, 21:46
Gerdi

What about lirc?

Is there still a package lirc or igorplususb?
I don't find them!
25-07-2008, 07:07
wengi

http://ipkg.nslu2-linux.org/feeds/op...table/Packages

not from optware.

wengi
27-07-2008, 19:29
stefantriep

getting error before formatting disk

[stefan@AsusServer root]$ fdisk /dev/discs/disc0/disc

Unable to open /dev/discs/disc0/disc

any idea?

Just following your how to from point 1

[stefan@AsusServer root]$ ps
PID Uid VmSize Stat Command
1 stefan 660 S /sbin/init
2 stefan SW [keventd]
3 stefan SWN [ksoftirqd_CPU0]
4 stefan SW [kswapd]
5 stefan SW [bdflush]
6 stefan SW [kupdated]
7 stefan SW [mtdblockd]
43 stefan 308 S telnetd
48 stefan 380 S httpd eth1
54 stefan 368 S klogd
55 nobody 464 S dnsmasq
56 stefan 400 S syslogd -m 0 -O /tmp/syslog.log -S -l 7
61 stefan SW [khubd]
73 stefan 448 S watchdog
75 stefan 344 S ntp
87 stefan 480 S dropbear
95 stefan 432 S udhcpc -i eth1 -p /var/run/udhcpc0.pid -s /tmp/udhcpc
100 stefan 748 S dropbear
101 stefan 556 S -sh
118 stefan 396 R ps
27-07-2008, 21:29
bigphantom

did you unmount the file ?
umount /tmp/mnt/discX_X

just post the output of the following command
df

Quote:

Originally Posted by stefantriep

getting error before formatting disk

[stefan@AsusServer root]$ fdisk /dev/discs/disc0/disc

Unable to open /dev/discs/disc0/disc

any idea?

Just following your how to from point 1

[stefan@AsusServer root]$ ps
PID Uid VmSize Stat Command
1 stefan 660 S /sbin/init
2 stefan SW [keventd]
3 stefan SWN [ksoftirqd_CPU0]
4 stefan SW [kswapd]
5 stefan SW [bdflush]
6 stefan SW [kupdated]
7 stefan SW [mtdblockd]
43 stefan 308 S telnetd
48 stefan 380 S httpd eth1
54 stefan 368 S klogd
55 nobody 464 S dnsmasq
56 stefan 400 S syslogd -m 0 -O /tmp/syslog.log -S -l 7
61 stefan SW [khubd]
73 stefan 448 S watchdog
75 stefan 344 S ntp
87 stefan 480 S dropbear
95 stefan 432 S udhcpc -i eth1 -p /var/run/udhcpc0.pid -s /tmp/udhcpc
100 stefan 748 S dropbear
101 stefan 556 S -sh
118 stefan 396 R ps
27-07-2008, 22:03
stefantriep

df shows 1 mount

/dev/root /
28-07-2008, 07:36
wengi

Hi,

first we need more info:
Model?
HDD?
ISE/USB?
Firmware?

is the disc present?
Any errors in syslog?
Post result of

Code:

ls -la /dev/discs/ df mount

wengi
29-07-2008, 21:24
Arbadelli

Almost Working

Thanks for this Tut again!!

It worked now with my 1TB HDD

but is there a possibillity you can make a tool which give me information about the Free GB's and used GB's on the HDD?

So everybody knows how much the can use anyway.

Thanks anyway for the answer
30-07-2008, 07:09
wengi

Quote:

Originally Posted by Arbadelli

but is there a possibillity you can make a tool which give me information about the Free GB's and used GB's on the HDD?

SSH/telnet: df -h
Samba: Map share as drive and explorer will show the info
ftp: No idea

wengi
30-07-2008, 14:08
stefantriep

Quote:

Originally Posted by wengi

Hi,

first we need more info:
Modell: WL 500g
HDD: Hitachi 100 GB
ISE/USB: USB 2.0 HDD
Firmware: Oleg 1.9.2.7-7g

is the disc present? Disk connected before router startup, it is a empty disk

Any errors in syslog?

Code:

[stefan@AsusServer /tmp]$ vi syslog.log Jan 1 01:00:02 syslogd started: BusyBox v1.1.3 Jan 1 01:00:02 kernel: zone(1): 0 pages. Jan 1 01:00:02 kernel: zone(2): 0 pages. Jan 1 01:00:02 kernel: Kernel command line: root=/dev/mtdblock2 noinitrd init=/ Jan 1 01:00:02 kernel: CPU: BCM4710 rev 0 at 125 MHz Jan 1 01:00:02 kernel: !unable to setup serial console! Jan 1 01:00:02 kernel: Calibrating delay loop... 82.94 BogoMIPS Jan 1 01:00:02 kernel: Memory: 13840k/16384k available (1799k kernel code, 2544 Jan 1 01:00:02 kernel: Dentry cache hash table entries: 2048 (order: 2, 16384 b Jan 1 01:00:02 kernel: Inode cache hash table entries: 1024 (order: 1, 8192 byt Jan 1 01:00:02 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 byte Jan 1 01:00:02 kernel: Buffer-cache hash table entries: 1024 (order: 0, 4096 by Jan 1 01:00:02 kernel: Page-cache hash table entries: 4096 (order: 2, 16384 byt Jan 1 01:00:02 kernel: Checking for 'wait' instruction... unavailable. Jan 1 01:00:02 kernel: POSIX conformance testing by UNIFIX Jan 1 01:00:02 kernel: PCI: Fixing up bus 0 Jan 1 01:00:02 kernel: PCI: Fixing up bridge Jan 1 01:00:02 kernel: PCI: Fixing up bus 1 Jan 1 01:00:02 kernel: Linux NET4.0 for Linux 2.4 Jan 1 01:00:02 kernel: Based upon Swansea University Computer Society NET3.039 Jan 1 01:00:02 kernel: Initializing RT netlink socket Jan 1 01:00:02 kernel: Starting kswapd Jan 1 01:00:02 kernel: Journalled Block Device driver loaded Jan 1 01:00:02 syslogd started: BusyBox v1.1.3 Jan 1 01:00:02 kernel: zone(1): 0 pages. Jan 1 01:00:02 kernel: zone(2): 0 pages. Jan 1 01:00:02 kernel: Kernel command line: root=/dev/mtdblock2 noinitrd init=/linuxrc console=ttyS0,115200 Jan 1 01:00:02 kernel: CPU: BCM4710 rev 0 at 125 MHz Jan 1 01:00:02 kernel: !unable to setup serial console! Jan 1 01:00:02 kernel: Calibrating delay loop... 82.94 BogoMIPS Jan 1 01:00:02 kernel: Memory: 13840k/16384k available (1799k kernel code, 2544k reserved, 248k data, 68k init, 0k highmem) Jan 1 01:00:02 kernel: Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Jan 1 01:00:02 kernel: Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Jan 1 01:00:02 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Jan 1 01:00:02 kernel: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Jan 1 01:00:02 kernel: Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Jan 1 01:00:02 kernel: Checking for 'wait' instruction... unavailable. Jan 1 01:00:02 kernel: POSIX conformance testing by UNIFIX Jan 1 01:00:02 kernel: PCI: Fixing up bus 0 Jan 1 01:00:02 kernel: PCI: Fixing up bridge Jan 1 01:00:02 kernel: PCI: Fixing up bus 1 Jan 1 01:00:02 kernel: Linux NET4.0 for Linux 2.4 Jan 1 01:00:02 kernel: Based upon Swansea University Computer Society NET3.039 Jan 1 01:00:02 kernel: Initializing RT netlink socket Jan 1 01:00:02 kernel: Starting kswapd Jan 1 01:00:02 kernel: Journalled Block Device driver loaded Jan 1 01:00:02 kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) Jan 1 01:00:02 kernel: devfs: boot_options: 0x1 Jan 1 01:00:02 kernel: NTFS driver v1.1.22 [Flags: R/O] Jan 1 01:00:02 kernel: pty: 256 Unix98 ptys configured Jan 1 01:00:02 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Jan 1 01:00:02 kernel: HDLC line discipline: version $Revision$, maxframe=4096 Jan 1 01:00:02 kernel: N_HDLC line discipline registered. Jan 1 01:00:02 kernel: loop: loaded (max 8 devices) Jan 1 01:00:02 kernel: PPP generic driver version 2.4.2 Jan 1 01:00:02 kernel: PPP Deflate Compression module registered Jan 1 01:00:02 kernel: PPP BSD Compression module registered Jan 1 01:00:02 kernel: MPPE/MPPC encryption/compression module registered Jan 1 01:00:02 kernel: Amd/Fujitsu Extended Query Table v1.0 at 0x0040 Jan 1 01:00:02 kernel: Flash Id: Vendor: 0x0020 Device: 0x00ca Jan 1 01:00:02 kernel: Physically mapped flash: JEDEC Device ID is 0xCA. Assuming broken CFI table. Jan 1 01:00:02 kernel: Physically mapped flash: Swapping erase regions for broken CFI table. Jan 1 01:00:02 kernel: number of CFI chips: 1 Jan 1 01:00:02 kernel: Flash device: 0x400000 at 0x1fc00000 Jan 1 01:00:02 kernel: Physically mapped flash: squashfs filesystem found at block 941 Jan 1 01:00:02 kernel: Creating 5 MTD partitions on "Physically mapped flash": Jan 1 01:00:02 kernel: 0x00000000-0x00040000 : "pmon" Jan 1 01:00:02 kernel: 0x00040000-0x003f0000 : "linux"

Post result of

Code:

[stefan@AsusServer root]$ df Filesystem 1k-blocks Used Available Use% Mounted on /dev/root 2880 2880 0 100% / [stefan@AsusServer root]$ ls -la /dev/discs/ ls: /dev/discs/: No such file or directory [stefan@AsusServer root]$ mount /dev/root on / type squashfs (ro) none on /dev type devfs (rw) proc on /proc type proc (rw) ramfs on /tmp type ramfs (rw) usbfs on /proc/bus/usb type usbfs (rw)

wengi

I hope you can find something
30-07-2008, 14:30
wengi

Hi,

please post result of "lsmod".
Is the above all of the syslog? There should be more....

wengi
30-07-2008, 16:15
stefantriep

[stefan@AsusServer root]$ lsmod
Module Size Used by
printer 12676 0 (unused)
lp 8668 0
parport_splink 2956 1
parport 25696 1 [lp parport_splink]
usb-ohci 21940 0 (unused)
usbcore 77264 1 [printer usb-ohci]
ip_nat_ftp 3944 0 (unused)
ip_conntrack_ftp 5248 1
ipt_NETMAP 992 0 (unused)
ip_nat_starcraft 2224 0 (unused)
wl 423856 0 (unused)
et 34912 0 (unused)
30-07-2008, 16:54
stefantriep

Quote:

Originally Posted by wengi

Hi,

please post result of "lsmod".
Is the above all of the syslog? There should be more....

wengi

Yes that is the syslog. The AsusServer is most of the time powered off and this is the syslog after 1 minute startup

Show 40 post(s) from this thread on one page