New oleg firmware version

Printable View

Show 40 post(s) from this thread on one page

14-10-2009, 18:37
Lesiuk

Quote:

Originally Posted by wpte

I second that... if you look at a modern day machine you can do a benchmark, which gives you a decrypt speed of about 250mb/s this is straight in the ram which can go over 1500mb/s.
and that with a quad core..
so how would a slow 3,5mb/s usb harddrive with even a slower cpu perform?

usb in that router can work faster than 3,5 mb/s

Code:

[root@LesiukNET www]$ hdparm -tT /dev/discs/disc0/disc /dev/discs/disc0/disc: Timing cached reads: 58 MB in 2.00 seconds = 29.00 MB/sec Timing buffered disk reads: 20 MB in 3.25 seconds = 6.15 MB/sec

29 MB/s its 230 mbit
14-10-2009, 19:19
wpte

Quote:

Originally Posted by Lesiuk

usb in that router can work faster than 3,5 mb/s

Code:

[root@LesiukNET www]$ hdparm -tT /dev/discs/disc0/disc /dev/discs/disc0/disc: Timing cached reads: 58 MB in 2.00 seconds = 29.00 MB/sec Timing buffered disk reads: 20 MB in 3.25 seconds = 6.15 MB/sec

29 MB/s its 230 mbit

true, but it's not exactly the effective speed in applications:(
the lack of enough ram is probably the most one to blame for that:p

I was talking about mb/s not mbit/s btw;)

mine goes even faster:p

PHP Code:

/dev/discs/disc0/disc: Timing cached reads: 86 MB in 2.02 seconds = 42.57 MB/sec Timing buffered disk reads: 28 MB in 3.10 seconds = 9.03 MB/sec /dev/discs/disc1/disc: Timing cached reads: 76 MB in 2.00 seconds = 38.00 MB/sec Timing buffered disk reads: 30 MB in 3.02 seconds = 9.93 MB/sec
14-10-2009, 19:23
My_Name_Is_Neo

Changelog

Hi Everyone.
I am running original Oleg's 1.9.2.7-10 firmware version on my WL-500w.
I had set it up with this firmware when i bought it back in May09. I wanted to upgrade the firmware to this new version on google code which is r665 currently. I dont have a very good reason to upgrade but I just like my gadgets to be up-to-date :P.
Now i have 2 questions -
1. Is there a changelog of what has been improved/changed over in these builds. There is no info on googlecode page and even after translation I am not able to make sense out of the Russian thread it links to.
2. I could not find a good walkthru which talks about updating the firmware. so here is my plan.
a. Restore to factory settings
b. Flash via Web-Interface
c. Re-do wengi's guide instructions again. I'll have to wipe the /opt directory. right?

Can a helpful soul point me to right direction?
Thanks
14-10-2009, 19:42
lly

Quote:

Originally Posted by My_Name_Is_Neo

1. Is there a changelog of what has been improved/changed over in these builds. There is no info on googlecode page and even after translation I am not able to make sense out of the Russian thread it links to.

Look better :p History of Changes

Quote:

2. I could not find a good walkthru which talks about updating the firmware. so here is my plan.
a. Restore to factory settings
b. Flash via Web-Interface
c. Re-do wengi's guide instructions again. I'll have to wipe the /opt directory. right?

Like all Oleg FW's - a & b - yes. You can leave /opt as is - FW don't know about it content. Probable, you have to change some scripts due to updated utils.
14-10-2009, 19:58
wpte

Quote:

Originally Posted by lly

Look better :p History of Changes

still got a question about that... the webstr module works great, but are the meta keywords also scanned?
works quite good :D
14-10-2009, 20:08
My_Name_Is_Neo

Quote:

Originally Posted by lly

Look better :p History of Changes

Like all Oleg FW's - a & b - yes. You can leave /opt as is - FW don't know about it content. Probable, you have to change some scripts due to updated utils.

Thanks lly.
My bad I should have looked harder. looks like lots of new patches to the system.
14-10-2009, 20:21
lly

Quote:

Originally Posted by wpte

still got a question about that... the webstr module works great, but are the meta keywords also scanned?
works quite good :D

It is not our module, no documentation :( Seems to be, meta is not checked.
25-10-2009, 12:15
weixing

oleg - upnp does not work?

I am running bitcomet and it tells me that the upnp device cannot be found. How to resolve?
25-10-2009, 12:28
theMIROn

Quote:

Originally Posted by weixing

I am running bitcomet and it tells me that the upnp device cannot be found. How to resolve?

check for upnp is running

Code:

ps | grep upnp
25-10-2009, 12:37
weixing

Quote:

Originally Posted by theMIROn

check for upnp is running

Code:

ps | grep upnp

it's running!
141 admin 1992 S upnp -D -L br0 -W ppp0

but just bitcomet cannot detect a upnp device is present. Any solutions?
25-10-2009, 18:50
wpte

I used bitcomet a while, and it might not have all the right standards I think:p

utorrent has no problem portforwarding, since it uses the windows api for upnp portforwarding.

just like this program: http://www.codeproject.com/KB/IP/PortForward.aspx

also I noticed that programs like limewire, xfire and world of warcraft work perfectly fine.:p
26-10-2009, 20:47
wpte

I just update lighttpd and noticed it wouldn't start anymore...
after entering debug mode:

Quote:

lighttpd -D -f /opt/etc/lighttpd/lighttpd.conf
fdevent_linux_sysepoll.c.131: epoll_create failed (Function not implemented), try to set server.event-handler = "poll" or "select"
fdevent.c.47: event-handler linux-sysepoll failed, try to set server.event-handler = "poll" or "select"

epoll is something that should be included in the kernel as far as I know... and it has been the standard option for lighttpd since a long time:confused:
is there going to be epoll support or is this another bad compilation?:p
27-10-2009, 07:54
lly

Quote:

Originally Posted by wpte

epoll is something that should be included in the kernel as far as I know...

To use epoll program has to be compiled with our toolchain, since standard headers for 2.4 doesn't include epoll syscalls.
27-10-2009, 08:16
theMIROn

looks like optware guys should turn off epoll usage wiithin lighttpd's mkfile and/or apply some patch.
27-10-2009, 11:17
wpte

Quote:

Originally Posted by theMIROn

looks like optware guys should turn off epoll usage wiithin lighttpd's mkfile and/or apply some patch.

I seriously don't get why so many packages change constantly without the same settings:p
ah well... it's fixed now I guess.

Any chance of ipv6 coming back? according to libc http://wl500g.info/showthread.php?t=21119 it works on 1.9.2.7-10.

I know I'm a bit nagging atm:o

Show 40 post(s) from this thread on one page