New oleg firmware version

Printable View

Show 40 post(s) from this thread on one page

16-09-2009, 16:04
al37919

also make sure that your router is not wl-500gX, but wl-500 deluxe, because wl-500gx firmware is intended for deluxe.
16-09-2009, 20:43
DrChair

Quote:

Originally Posted by theMIROn

Try to unplug and plug usb hdd again, and check syslog after
M.b smth wrong with your pre/post-mount script

unplug and plug usb hdd again doesn't make any difference...

I flashed r550, and that version does find my harddisks again
(only with one of the 3, it now finds that the usb cable is bad, so I disconnected that one)

Reflashing the newest and the hdd's don't work anymore :(
16-09-2009, 20:59
lly

Quote:

Originally Posted by DrChair

unplug and plug usb hdd again doesn't make any difference...

I flashed r550, and that version does find my harddisks again
(only with one of the 3, it now finds that the usb cable is bad, so I disconnected that one)

Reflashing the newest and the hdd's don't work anymore :(

Very strange, since there was no changes from r473 to current r587 in USB subsystem at all. Seems to be, something goes wrong on your build environment or with router HW (power supply, for example).
Anyway, can you find your HDD's in

Code:

cat /proc/bus/usb/devices

output?
17-09-2009, 22:58
cichy

After upgrading to version wl500g-1.9.2.7-d-r566 of Oleg's Firmware my forum (mybb) is loading awfully long comparing to earlier version. Also in log i found this

Code:

15:46:37 dropbear[385]: exit after auth (admin): error reading: Connection reset by peer Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/1) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/1) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/1) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/1) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/1) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/1) Sep 16 16:07:23 kernel: __alloc_pages: 0-order allocation failed (gfp=0x20/0)

Dunno what may cause this :(

P.S. After upgrading to wl500g-1.9.2.7-d-r587 (2009-09-17) there are still problems with page time generation.
18-09-2009, 07:41
lly

Quote:

Originally Posted by cichy

After upgrading to version wl500g-1.9.2.7-d-r566 of Oleg's Firmware my forum (mybb) is loading awfully long comparing to earlier version.

If mybb from optware, check that you have optware's uClibc 0.9.28 in /opt/lib. If you compile it yourself (or someone else against /lib/libc.so), you have to rebuild it with newer toolchain (i.e. new uClibc).

Such messages produces kernel when physical memory is exhausted at all.
18-09-2009, 15:01
weixing

RTORRENT won't start download

I've installed the oleg firmware and rtorrent, but I find that rtorrent cannot start dl, always 0%. used ps to see and can see rtorrent is already running. Anybody knows why?
18-09-2009, 21:26
lly

Quote:

Originally Posted by DrChair

Just flashed this firmware, but now the router doesn't mount my harddisks anymore.

Hope, we fixed the bug in new r599, please try.
18-09-2009, 22:09
cichy

I've reverted to r473 and everything works fine, pages are generated better and faster then on r587. About compiling uClibc dunno exactly how to do this so i'll stick with this version.
19-09-2009, 07:23
lly

Quote:

Originally Posted by cichy

I've reverted to r473 and everything works fine, pages are generated better and faster then on r587.

Unfortunately, we can't reproduce such problem without your attention. First of all, r587 has broken USB HDD support, please try r599.

Quote:

About compiling uClibc dunno exactly how to do this so i'll stick with this version.

You don't need to compile uClibc itself, I asked against which uClibc version your application (mybb) linked. More simple question - where did you get it?
19-09-2009, 12:15
cichy

Quote:

Originally Posted by lly

Unfortunately, we can't reproduce such problem without your attention. First of all, r587 has broken USB HDD support, please try r599.

I'll try tomorrow after returning from work, maybe this will help:)

Quote:

Originally Posted by lly

You don't need to compile uClibc itself, I asked against which uClibc version your application (mybb) linked. More simple question - where did you get it?

This is what i get from ipkg list_installed cmd

Code:

uclibc-opt - 0.9.28-13 - micro C library for embedded Linux systems buildroot - 4.1.1-13 - uClibc compilation toolchain
19-09-2009, 12:18
lly

Quote:

Originally Posted by cichy

This is what i get from ipkg list_installed cmd

Code:

uclibc-opt - 0.9.28-13 - micro C library for embedded Linux systems buildroot - 4.1.1-13 - uClibc compilation toolchain

Well, but I can't see mybb. Is it from optware?
19-09-2009, 12:21
cichy

Quote:

Originally Posted by lly

Well, but I can't see mybb. Is it from optware?

Nope mybb (forum) is installed straight from the sources, from http://www.mybboard.net/ i didn't found any mybb in optware.
19-09-2009, 12:37
lly

Quote:

Originally Posted by cichy

Nope mybb (forum) is installed straight from the sources, from http://www.mybboard.net/ i didn't found any mybb in optware.

So, it is self-compiled and you have native buildroot installed. Can you provide output of

Code:

readelf -d <your_mybb_binary>

?

P.S. I never use native compiler on router since it too slow & buggy due to small RAM.
20-09-2009, 00:51
wpte

Quote:

Originally Posted by lly

So, it is self-compiled and you have native buildroot installed. Can you provide output of

Code:

readelf -d <your_mybb_binary>

?

P.S. I never use native compiler on router since it too slow & buggy due to small RAM.

it's php;)
so there can be something wrong with the php binary or extentions?
you can try to debug by executing the php files directly in the console:

Quote:

php /path/to/phpfile.php

it usually brings up a lot more information on things (or you must turn on error reporting in php.ini):)
20-09-2009, 21:20
cichy

OK gents:) After upgrading fw to verson r599 site generation time dropped to earlier values (those from r473) mybb is loading fine:) PHPSysinfo is still acting strange (long page time generation) but this is just a minor glitch that doesn't affect using forum :) Still there's an issue with updating dns for my router/site it gives

Code:

ddns update: authentication failure

and frankly i don't know what may cause this (checked password and login name they're all good)

Show 40 post(s) from this thread on one page