Understanding and debugging Transmission [oleo?]

have a look at this: http://trac.nslu2-linux.org/optware/...t=on&ticket=on
You can see that you have the newest version installed!

And believe oleo when he writes

Quote:

---

Transmission is updated to latest svn version

---

Quote:

---

Originally Posted by wengi

have a look at this: http://trac.nslu2-linux.org/optware/...t=on&ticket=on
You can see that you have the newest version installed!

And believe oleo when he writes

---

ok thx
I'll try it today!

I have installed the program and it seems that it works, but
1) I can't display the graph of the throughtput information.:confused:
2) show error when I Click on the "source/work/target":confused:

Can anyone please help !!!

Visit http://wl500g.info/showthread.php?t=6823 for similar problem of nonexistent directory.

Thanks oleo, it works after I install:
1) gnuplot_4.2.rc2-5_mipsel.ipk
2) uclibc-opt_0.9.28-12_mipsel.ipk

Thanks!!!

In the web interface of transmission:

My links: "source" "work" and "target" are not valid.
(Also "URL" doesn't work)

Is it because my username is root instead of admin?

Where can I correct it?

This depends on your http daemon. If you are using busybox_httpd then there is no autodir feature and links are preaty useless. If thttpd is used the you can create symlinks to directories and enable follow symlinks in config. Same goes to other servers. Anyway this links are not regarded as a feature but rather useless convenience.

Thanks a lot (Oleg and Wengi)!

Both of you do a very nice job.
How can I be thankful to you?

Hi:

sometimes, i put transmission pushing a torrent file. After a few hours or on the next day, when i go see how it is, the torrent simply is missing on the list and the folder where it should go (inside the target folder) is simply empty :eek: No file at all...Anyone with the same strange events? :confused:

I haven't had this problem before. Are you running on an older version of transmission maybe?

The most annoying problem with transmission i have encountered so far are:

-Sometimes the download stops although there are enough seeders. (i solve it by hitting the 'push' button twice. active->suspended->active)

It looks like 'transmission' doesn't like to encounter some type of errors. If it does it just stops. i am on transmission version 0.7+r2295-2


I am planning to go back to enhanced-ctorrent when seaky's sctcs version 1.0 web front end is final.

Maybe your are right. My version is 0.7+r1874-1. I do have that same problem of torrents stopping sometimes :(

I did try to make the upgrade (using ipkg upgrade), but i got the message:

Nothing to be done
Successfully terminated.

This is a known problem that occurs only if you upgrade in the middle of torrent download. I suggest to copy torrent back to source, purge stalled torrent and start freshly.

Versions after r1888 changed file checkup to serializing.

I tried to use another user than root or admin by adapting
transmision.conf, but...

After i reboot the wl500g and start a torrent, the files are still
owned by de root/admin user.

Am i doing something wrong? :confused:

work files should be owned by root. watchdog changes to user specified.

Hi Oleo,

I want to be able to delete those files via ftp, but since
i cannot use the root user for an ftp (vsftpd) connection i also cannot delete those torrent files via ftp.

Do you have an idea how i can solve this ftp dillema?

I was happy to see a working log, plot and transmission deamons after a few setup problems, but now I get the following error in the transmission list "Error: Generic I/O error Start: 02 Aug 08:50 uploaded: 0.0 MB".

If i look in the list just after starting the watchdog and pressing update then the list shows the following status line
`KNOPPIX_V5.1.1DVD-2007-01-04-DE Progress: 0.00 %, 9 peers, dl from 0 (0.00 KB/s), ul to 0 (0.00 KB/s) Start: 02 Aug 08:50 uploaded: 0.0 MB`

I looked in the transmission log and there is only one line added since the start of the torrent:
"Aug 2 08:50:58 transmissiond[392]: Starting torrent /tmp/harddisk/torrent/work/KNOPPIX_V5.1.1DVD-2007-01-04-DE/KNOPPIX_V5.1.1DVD-2007-01-04-DE.torrent
Aug 2 08:51:07 transmissiond[392]: Fatal error, stopping download (-2147483584)"

What could be wrong?
I use Oleg version 1.9.2.7-7g and all packages are re-installed for ipkg-opt with the following feed:
http://ipkg.nslu2-linux.org/feeds/op...g/cross/stable

Please help!

I suggest that you erase all files from $WORK, move .torrent to $SOURCE and start over. I've seen this issue once during upgrade in the middle. And recent changes to fast resume are completelly different so it is also recommended to erase $WORK/.transmission/cache files.
All this should be done when daemon is paused.

Here is a watchdog snippet that should be clear enough.

Code:

---

move_to_target ()
{                                           
    debug "Move to target"
    DIRNAME="${TORRENT%/*}"
    DEST="${TARGET}/${DIRNAME##*/}"
         
    mkdir -p "${DEST}"
    chmod 775 "${DEST}"                           
    grep -q ${GROUP} /etc/group && chgrp ${GROUP} "${DEST}"
    grep -q ${USER} /etc/passwd && chown ${USER} "${DEST}"
       
    cd "${TORRENT%/*}"
                                                 
    grep -q ${GROUP} /etc/group && chgrp ${GROUP} * .info .status
    grep -q ${USER} /etc/passwd && chown ${USER} * .info .status
    chmod 775 * .info .status
 
    notice "Moving files to: ${DEST}"
    mv * .info .status "${DEST}"
    chmod 775 "${DEST}"
 
    STATUS="Ok"
}

---

So If you do not have proper group and user in /etc/passwd and /etc/group then changing permissions will not be taken. If tou use Oleg firmware then you shout have /etc/passwd and /etc/group specified in /usr/local/.files

I suggest to have the same group in ftp clients. Leave owner admin. chgrp and chown should have -R for recursion. Will chenge this in future releases.

Thanks for the quick response!

I erased the files with transmission in pause mode, but it doesn´t seem to fix my problem.

I forgot to mention that I also opened the incoming ports on the firewall.

I just wonder why I get the I/O error when the download is started. Can it be a problem of ctorrent (which is doing the real torrent DL)?

Geve us some more logs, trz different torrent. Check permissions on $WORK. Maybe you do not have write permission in $HOME to accomodate .torrent/cache files!

1) I have tried several torrents which I first tested with the Bitcomet client.

2) I can´t find any .cache file where should it normally be created?
In the /tmp/harddisk/torrent/work directory I have the following files:
KNOPPIX_V5.1.1DVD-2007-01-04-DE
transfer.data
transfer.gnuplot

I checked the directory permissions and admin has r/w access.

3) some more logging of /opt/var/log/messages:
Aug 2 21:27:04 transmissiond[365]: 1186082824 1 dl 0.00 ul 0.00 ld 0.14
Aug 2 21:27:08 transmissiond[365]: 1186082828 1 dl 0.00 ul 0.00 ld 0.15
Aug 2 21:27:11 transmissiond[365]: 1186082831 1 dl 0.00 ul 0.00 ld 0.17
Aug 2 21:27:16 transmission_watchdog: Error from tracker
Aug 2 21:27:16 transmission_watchdog: Torrent /tmp/harddisk/torrent/work/KNOPPIX_V5.1.1DVD-2007-01-04-DE/KNOPPIX_V5.1.1DVD-2007-01-04-DE.torrent suspended
Aug 2 21:27:22 transmissiond[365]: Stopping torrent /tmp/harddisk/torrent/work/

4) I also have ctorrent installed, is this ok or is it conflicting like torrent?

Hello
I use 500gP with oleg's firmware 1.9.2.7-7g with Transmission 0.7+r2474-1
I have some problems with Transmission.
- Torrent's filename with foreign characters can use with Transmission(Transmission.cgi show correct character and can load it), but filename of loaded file(s) is unreadable, I must use RenameFileFolder.exe to convert it back to my language(Thai).
- If some loading file generate too many "Piece xxxx hash FAILED", it will never finish. The Progress: will be up and down between 91.00% and 91.99%, never reach 92%. I notice that this will happen only large file(more than 4Gbs, my hd filesystem is ext3)

Thanks you for help

Post such request directly to http://transmission.m0k.org/ developers (forum or trac) but try their Linux client first.

Thanks you, Oleo

Thanks for the help!
I'll try to figure it out.

It works!

The problem was:
The torrent directory paths were pointing at a FAT32 partition.
the FAT32 filesystem was mounted on /tmp/harddisk/torrent and I think that transmission needs a ext2 or ext3 filesystem.

The Fix:
I changed the torrent locations $source, $work and $target to /tmp/harddisk/part1/torrent/ (this is a ext3 filesystem) and now everything runs fine!