[USB] Webcams

Printable View

Show 40 post(s) from this thread on one page

05-10-2005, 13:23
henry

Agfa ePhoto CL20

Tested@
Model: WL-500g
Firmware: 1.9.2.7-6b

Device NOT WORKING
Brandname: AGFA
Brandtype: CL 20

http://www.dealtime.com/xPF-Agfa_ePhoto_CL20
27-10-2005, 17:58
jpearn

[USB] Webcam

Logitech® QuickCam® Sphere

Tested@
Model: WL-HDD
Firmware: 1.9.2.7-6b

Works slow @ 320x240, device slow to update / react.

160x120 works fine, also running Twonky Media Server, Samba and thttpd, with no problems, and my other webcam sending pics to the FTP server running on it every 5 minutes :)
28-11-2005, 19:55
MatB

Tested@
Model: WL-500gx
Firmware: 1.9.2.7-6b

Device NOT WORKING
Brandname: Thrustmaster TM 507
22-12-2005, 16:04
catch23

Logitech QuickCam Pro 5000

Tested@
Model: WL-500gx
Firmware: 1.9.2.7-6b Oleg

Device NOT WORKING :mad:
Brandname: Logitech
Brandtype: QuickCam Pro 5000
USB Interface: USB 1.1 compliant

System Log:
Jan 1 01:01:05 USB webcam: attached
Jan 1 01:01:11 kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.12 loaded.
Jan 1 01:01:11 kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
Jan 1 01:01:11 kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
Jan 1 01:01:11 kernel: usb.c: registered new driver Philips webcam
01-01-2006, 21:47
ajj

Logitech QuickCam Pro 5000

Tested@
Model: WL-500gx
Firmware: 1.9.5.0

Device NOT WORKING :(
Brandname: Logitech
Brandtype: QuickCam Pro 5000
USB Interface: USB 1.1
15-01-2006, 23:51
klaus

Logitech QuickCam Communicate STX

Tested@
Model: WL-500g deluxe
Firmware: 1.9.2.7-7b Oleg

Device NOT WORKING
Brandname: Logitech
Brandtype: QuickCam Communicate STX
USB Interface: USB 1.1 compliant

System log:
Jan 1 01:16:20 USB webcam: attached
Jan 1 01:16:21 kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.12 loaded.
Jan 1 01:16:21 kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
Jan 1 01:16:21 kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
Jan 1 01:16:21 kernel: usb.c: registered new driver Philips webcam
31-01-2006, 15:40
Gigen

Tested@
Model: WL-500g deluxe
Firmware: 1.9.2.7-7a Oleg

Device NOT WORKING
Brandname: Genius
Brandtype: VideoCAM Trek v 2.0
USB Interface: USB 1.1 compliant

System log:
Jan 1 01:00:07 kernel: hub.c: new USB device 01:02.0-2, assigned address 2
Jan 1 01:00:08 kernel: usb.c: USB device 2 (vend/prod 0xc45/0x6007) is not claimed by any active driver.
10-02-2006, 14:07
za200ee

Logitech Quickcam Zoom

Tested@
Model: WL-500g deluxe
Firmware: 1.9.2.7-7b Oleg

Device partly WORKING:( but generally said it DOESN'T WORK
Brandname: Logitech
Brandtype: QuickCam Zoom
USB Interface: USB 1.1 compliant

If the device IS connected to Asus while it's been turning on it mostly works (just in low resolution). There's a problem with security alerts.

In fact I look for another webcam...
10-02-2006, 17:07
bord4kop

Canyon webcam NOT Working

Tested: NOT WORKING!
Model: WL-500g
Firmware: 1.9.5.0

Device:
Brandname: Canyon
USB Interface: 1.1
info:
Sensor Res: 300 pixel
Technology: CMOS
Optical Sensor: 1/5"
Max. image res: 352x288

URL To manufacturer: http://www.canyon-tech.com/
URL To product: http://www.canyon-tech.com/products/...meras/CN-WCAM1
11-02-2006, 12:13
za200ee

GENIUS VideoCAM GE111 & VideoCAM Look

Model: WL-500g deluxe
Firmware: 1.9.2.7-7b Oleg
Device NOT WORKING
Brandname: Genius
Brandtype: VideoCAM GE111

kernel: hub.c: new USB device 01:02.0-2, assigned address 3
kernel: usb.c: USB device 3 (vend/prod 0x93a/0x2471) is not claimed by any active driver

************************************************** *******
Device NOT WORKING
Brandname: Genius
Brandtype: VideoCAM Look

hub.c: new USB device 01:02.0-2, assigned address 3
kernel: usbaudio: device 3 audiocontrol interface 1 has 1 input and 0 output AudioStreaming interfaces
kernel: usbaudio: device 3 interface 2 altsetting 1 channels 1 framesize 2 configured
kernel: usbaudio: valid input sample rate 8000
kernel: usbaudio: device 3 interface 2 altsetting 1: format 0x00000010 sratelo 8000 sratehi 8000 attributes 0x00
kernel: usbaudio: registered dsp 14,3
kernel: usbaudio: no mixer controls found for Terminal 2
USB audio: attached
18-03-2006, 18:38
gladiator-01

Tested@
Model: WL-500g deluxe
Firmware: 1.9.2.7-7b Oleg

Device NOT WORKING :mad:
Brandname: SilverCrest ( die vom Lidl )
Brandtype: WebCam compliant1,3MPix
USB Interface: USB 2.0

System log:
Mar 18 18:20:51 kernel: hub.c: new USB device 01:02.0-1, assigned address 3
Mar 18 18:20:51 kernel: usb.c: USB device 3 (vend/prod 0x93a/0x2600) is not claimed by any active driver.

URL To manufacturer:http://www.mysilvercrest.de
URL To product:http://www.mysilvercrest.de/de/artikel.php?a=79
29-03-2006, 21:06
tomzavodny

MSI StarCam 370i

Model: WL-500g deluxe
Firmware: 1.9.2.7-7c Oleg
Device NOT WORKING
Brandname: MSI
Brandtype: StarCam 370i

Jan 1 00:00:06 kernel: usb.c: registered new driver usbdevfs
Jan 1 00:00:06 kernel: usb.c: registered new driver hub
Jan 1 00:00:06 kernel: usb-uhci.c: $Revision: 1.275 $ time 21:43:09 Apr 20 2005
Jan 1 00:00:06 kernel: usb-uhci.c: High bandwidth mode enabled
Jan 1 00:00:06 kernel: PCI: Enabling device 01:02.0 (0000 -> 0001)
Jan 1 00:00:06 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 2
Jan 1 00:00:06 kernel: usb-uhci.c: Detected 2 ports
Jan 1 00:00:06 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 00:00:06 kernel: hub.c: USB hub found
Jan 1 00:00:06 kernel: hub.c: 2 ports detected
Jan 1 00:00:06 kernel: PCI: Enabling device 01:02.1 (0000 -> 0001)
Jan 1 00:00:06 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 2
Jan 1 00:00:06 kernel: usb-uhci.c: Detected 2 ports
Jan 1 00:00:06 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 00:00:06 kernel: hub.c: USB hub found
Jan 1 00:00:06 kernel: hub.c: 2 ports detected
Jan 1 00:00:06 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 1 00:00:06 kernel: PCI: Enabling device 01:02.2 (0000 -> 0002)
Jan 1 00:00:06 kernel: ehci_hcd 01:02.2: PCI device 1106:3104
Jan 1 00:00:06 kernel: ehci_hcd 01:02.2: irq 2, pci mem c00a6000
Jan 1 00:00:06 kernel: usb.c: new USB bus registered, assigned bus number 3
Jan 1 00:00:06 kernel: PCI: 01:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
Jan 1 00:00:06 kernel: ehci_hcd 01:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 1 00:00:07 kernel: hub.c: USB hub found
Jan 1 00:00:07 kernel: hub.c: 4 ports detected
Jan 1 00:00:07 kernel: usb.c: registered new driver usblp
Jan 1 00:00:07 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 00:00:07 kernel: hub.c: connect-debounce failed, port 1 disabled
Jan 1 00:00:08 kernel: hub.c: new USB device 01:02.0-1, assigned address 2
Jan 1 00:00:08 kernel: usb.c: USB device 2 (vend/prod 0xc45/0x60c0) is not claimed by any active driver.
Jan 1 00:00:08 USB audio: attached
Jan 1 00:00:08 kernel: usb.c: registered new driver audio
Jan 1 00:00:08 kernel: usbaudio: device 2 audiocontrol interface 1 has 1 input and 0 output AudioStreaming interfaces
Jan 1 00:00:08 kernel: usbaudio: device 2 interface 2 altsetting 1 channels 1 framesize 2 configured
Jan 1 00:00:08 kernel: usbaudio: valid input sample rate 8000
Jan 1 00:00:08 kernel: usbaudio: valid input sample rate 16000
Jan 1 00:00:08 kernel: usbaudio: device 2 interface 2 altsetting 1: format 0x00000010 sratelo 8000 sratehi 16000 attributes 0x01
Jan 1 00:00:08 kernel: usbaudio: registered dsp 14,3
Jan 1 00:00:08 kernel: usbaudio: warning: found 1 of 0 logical channels.
Jan 1 00:00:08 kernel: usbaudio: assuming the channel found is the master channel (got a Philips camera?). Should be fine.
Jan 1 00:00:08 kernel: usbaudio: registered mixer 14,0
Jan 1 00:00:08 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 00:00:09 kernel: Linux video capture interface: v1.00
Jan 1 00:00:09 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 00:00:10 kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:10 kernel: usb.c: registered new driver usb-storage
Jan 1 00:00:10 kernel: USB Mass Storage support registered.
21-04-2006, 22:51
mistraller

Philips ToUcam II (pcvc820K)

Model: WL-500g deluxe
Firmware: 1.9.2.7-7c Oleg
Device WORKING
Brandname: Philips
Brandtype: ToUcam II (pcvc820K)
20-05-2006, 19:33
JaJoah

Model: WL-700gE
Firmware: 1.0.4.1
Device: NOT WORKING
Brandname: Logitech
Brandtype: Sphere

When connected, the light goes on, but it only captures 1 shot and then it's just not refreshed. And also, the picture is in B/W instead of colour :(
05-06-2006, 14:14
andrei.pop

Btc Pc-380

Model: BTC PC-380
Firmware: 1.0.4.1
Device: NOT WORKING
Brandname: BTC
Brandtype: PC-380
Product URL: http://www.btc.com.tw/english/2-9-5camera.htm#380
21-07-2006, 00:09
Tonos

Tested@
Model: WL-500gx
Firmware: 1.9.5.0

Device NOT WORKING >:E
Brandname: Trust
Brandtype: SpaceCam 150
16-08-2006, 20:37
void

Model: WL-500g
Firmware: 1.9.2.7-7e Oleg
Device NOT WORKING :mad:
Brandname: Medion (ALDI)
Brandtype: MD 85081 (PC-30)
17-08-2006, 17:02
sash

Not Working Ms-tech Lv-310

tested@
Model: WL-500gx
Firmware: 1.9.2.7-7e

Device NOT WORKING
Brandname: MS-TECH
Brandtype: LV-310
Product URL: Click Here

dmesg output:

hub.c: new USB device 01:02.0-1, assigned address 5
usb.c: USB device 5 (vend/prod 0x4fc/0x561) is not claimed by any active driver.

Sash
23-08-2006, 22:43
JaJoah

Model: WL-500gx
Firmware: 1.9.2.7-7e
Device: WORKING :)
Brandname: Logitech
Brandtype: Sphere

As the WL-700gE disappointed me I bought a second-handed WL-500gx which works quite allright
07-09-2006, 08:15
Actre

Logitech sphere / orbit / tpz

Model: WL-500g
Firmware: 1.9.2.7-7e
Device: NOT WORKING :mad:
Brandname: Logitech
Brandtype: Sphere

Everybody wrote this device working! And my config didn't work!
Please help!

Router:

Jan 1 01:00:03 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 01:00:03 kernel: hub.c: USB hub found
Jan 1 01:00:03 kernel: hub.c: 2 ports detected
Jan 1 01:00:04 kernel: hub.c: new USB device 00:04.0-1, assigned address 2
Jan 1 01:00:04 kernel: lp0: using parport0 (polling).
Jan 1 01:00:04 kernel: usb.c: USB device 2 (vend/prod 0x46d/0x8c2) is not claimed by any active driver.
Jan 1 01:00:04 USB webcam: attached
Jan 1 01:00:04 kernel: usb.c: registered new driver usblp
Jan 1 01:00:04 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 01:00:07 kernel: usb.c: registered new driver audio
Jan 1 01:00:07 kernel: usbaudio: device 2 audiocontrol interface 2 has 1 input and 0 output AudioStreaming interfaces
Jan 1 01:00:07 kernel: usbaudio: device 2 interface 3 altsetting 1 channels 1 framesize 2 configured
Jan 1 01:00:07 kernel: usbaudio: valid input sample rate 0
Jan 1 01:00:07 kernel: usbaudio: device 2 interface 3 altsetting 1: format 0x00000010 sratelo 0 sratehi 0 attributes 0x01
Jan 1 01:00:07 kernel: usbaudio: device 2 interface 3 altsetting 2 channels 1 framesize 2 configured
Jan 1 01:00:07 kernel: usbaudio: valid input sample rate 0
Jan 1 01:00:07 kernel: usbaudio: device 2 interface 3 altsetting 2: format 0x00000010 sratelo 0 sratehi 0 attributes 0x01
Jan 1 01:00:07 kernel: usbaudio: device 2 interface 3 altsetting 3 channels 1 framesize 2 configured
Jan 1 01:00:07 kernel: usbaudio: valid input sample rate 16000
Jan 1 01:00:07 kernel: usbaudio: device 2 interface 3 altsetting 3: format 0x00000010 sratelo 16000 sratehi 16000 attributes 0x01
Jan 1 01:00:07 kernel: usbaudio: registered dsp 14,3
Jan 1 01:00:07 kernel: usbaudio: warning: found 1 of 0 logical channels.
Jan 1 01:00:07 kernel: usbaudio: assuming the channel found is the master channel (got a Philips camera?). Should be fine.
Jan 1 01:00:07 kernel: usbaudio: registered mixer 14,0
Jan 1 01:00:07 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 01:00:08 kernel: Linux video capture interface: v1.00
Jan 1 01:00:08 kernel: pwc Philips webcam module version 9.0.2 loaded.
Jan 1 01:00:08 kernel: pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
Jan 1 01:00:08 kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
Jan 1 01:00:08 kernel: pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
Jan 1 01:00:08 kernel: pwc Default image size set to vga [640x480].
Jan 1 01:00:08 kernel: usb.c: registered new driver Philips webcam
Jan 1 01:00:09 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 01:00:09 kernel: pwc Philips webcam decompressor routines version 9.0-BETA-2
Jan 1 01:00:09 kernel: pwc Supports all cameras supported by the main module (pwc).
Jan 1 01:00:10 kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:10 kernel: usb.c: registered new driver usb-storage
Jan 1 01:00:10 kernel: USB Mass Storage support registered.
29-11-2006, 17:52
Vittorio

Terratec TerraCAM USB Pro

Tested@
Model: WL-500g deluxe
Firmware: tried both 1.9.2.7-7f Oleg and ASUS Stock 1.9.6.0

Device NOT WORKING :mad:
Brandname: Terratec
Brandtype: Terratec TerraCAM USB Pro
Controller: OV518+
Sensor: OV7620
USB Interface: USB 1.1 compliant

01:00:33 kernel: hub.c: new USB device 01:02.1-1, assigned address 3
01:00:33 kernel: ov51x.c: USB OV518+ video device found
01:00:33 kernel: ov51x.c: Device revision 0
01:00:33 kernel: ov51x.c: Compression required with OV518...enabling
01:00:34 kernel: ov51x.c: Sensor is an OV7620
01:00:35 kernel: ov51x.c: Device at usb-01:02.1-1 registered to minor 0
01:00:35 USB webcam: attached
01:00:37 kernel: ov511_decomp.c: v1.6 : OV511 Decompression Module

I've just purchased it, so I think it should be a new revision.

I don't understand why it chooses OV511 decompression despite it's an OV518+?
Why doesn't is use the OV518 decompression (included in Oleg's firmware)?

Image is totally unrecognizable "undecoded noise" . I assume it's caused by choosing wrong decompression routine.

Any idea?
03-01-2007, 18:48
vuk

A4tech pk-35N

Tested@
Model: WL-500g Premium
Firmware: 1.7.2.7-7f Oleg`s

Device NOT WORKING
Brandname: A4Tech
Brandtype: PK-35N
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.a4tech.com
URL To product: http://www.a4tech.com/en/product2.as...=89&MNO=PK-35N
14-01-2007, 17:39
akbor

Tested@
Model: WL-HDD, WL-500gP, WL-500g
Firmware: 1.9.2.7-7e, 1.9.2.7-7e

Device NOT WORKING (garbage picture)
Brandname: Terratec
Brandtype: Terratec TerraCAM USB Pro
Controller: OV518+
Sensor: OV7620

Jan 8 22:27:00 kernel: hub.c: new USB device 00:04.0-1, assigned address 3
Jan 8 22:27:00 kernel: ov51x.c: USB OV518+ video device found
Jan 8 22:27:00 kernel: ov51x.c: Device revision 0
Jan 8 22:27:00 kernel: ov51x.c: Compression required with OV518...enabling
Jan 8 22:27:00 kernel: ov51x.c: Sensor is an OV7620
Jan 8 22:27:01 kernel: ov51x.c: Device at usb-00:04.0-1 registered to minor 0
Jan 8 22:27:01 kernel: usbaudio: device 3 audiocontrol interface 1 has 1 input and 0 output AudioStreaming interfaces
Jan 8 22:27:01 kernel: usbaudio: device 3 interface 2 altsetting 1 channels 1 framesize 2 configured
Jan 8 22:27:01 kernel: usbaudio: valid input sample rate 8000
Jan 8 22:27:01 kernel: usbaudio: device 3 interface 2 altsetting 1: format 0x00000010 sratelo 8000 sratehi 8000 attributes 0x00
Jan 8 22:27:01 kernel: usbaudio: registered dsp 14,3
Jan 8 22:27:01 kernel: usbaudio: no mixer controls found for Terminal 2
Jan 8 22:27:01 USB webcam: attached
Jan 8 22:27:02 kernel: ov511_decomp.c: v1.6 : OV511 Decompression Module

I think, that are the same symptoms Vittorio described above

Regards

Robert
14-02-2007, 14:22
hongsi

Trust WB 1400t NOT WORKING

Tested@
Model: WL-HDD
Firmware: 1.9.2.7-7f

Device NOT WORKING
Brandname: Trust
Brandtype: WB 1400t
USB Interface: USB 1.1 compliant
20-03-2007, 23:09
dalanik

Tested@
Model: WL700gE 250Gb
Firmware: 1.0.4.6
Device NOT WORKING
Brandname: Logitech
Brandtype: QuickCam® for Notebooks Deluxe
URL To product:
http://www.logitech.com/index.cfm/pr...ONTENTID=10168

Tested@
Model: WL700gE 250Gb
Firmware: 1.0.4.6
Device NOT WORKING
Brandname: Logitech
Brandtype: QuickCam® Sphere MP
URL To product:
http://www.logitech.com/index.cfm/pr...ONTENTID=10628

Tested@
Model: WL700gE 250Gb
Firmware: 1.0.4.6
Device ONLY B/W IMAGE NOT UPDATING WELL
Brandname: Creative
Brandtype: Creative Video Blaster Webcam III
URL To product: too old :-)

Rats... I have 3 Cams and not a single one works...

D.
10-04-2007, 07:02
ipse

Quote:

Originally Posted by Actre

Device: NOT WORKING :mad:
Brandname: Logitech
Brandtype: Sphere

Everybody wrote this device working! And my config didn't work!
Please help!

I suppose your webcam will never work with ASUS router. In fact, there are two very different cams, named Logitech QC Orbit/Sphere and looking very similar (only internal plate differ). Old one, worked over Philips proprietary protocol and supported by pwc[x].o driver, and new one, working over open UVC protocol. UVC support in Linux is a new thing and seems it will not work for old 2.4 kernels. Look here for more details:
http://linux-uvc.berlios.de/

When writing about Philips and Logitech webcams, please, give their P/N and/or USB VID/PID.

It is really hard to find recent cam, that is supported by this old 2.4 kernel. If anybody knows - write here, please.
12-04-2007, 12:40
Elect

I'm out to buy one of the webcam's that work. Here is the list of all known working cams at the moment. Handy for you guy's who want to do the same..

Philips Vesta Pro (PCVC680K)
Philips Webcam Pro 3D (PCVC750K)
Philips ToUCam PRO II (PCVC840K) & (PCVC830K)
Philips ToUCam Pro (740k) (NOT THE XS)
Philips ToUcam II (pcvc820K)
Philips ToUcam Fun
Terratec TerraCAM USB Pro
Logitech QuickCam Pro 4000
Logitech Webcam Sphere
06-06-2007, 19:07
friedhelm

Tested@
Model: WL-500gx
Firmware: 1.7.2.7-7g Oleg`s

Device: WORKING
Brandname: Trust
Brandtype: SpaceCam USB
USB Interface: USB 1.1 compliant

http://www.trust.com/products/defaul...BCAMS&supp=yes
01-12-2007, 23:21
kath

Quote:

Originally Posted by Elect

I'm out to buy one of the webcam's that work. Here is the list of all known working cams at the moment. Handy for you guy's who want to do the same..

Thanks Elect, I did the same and have bought older webcam from your list.

Model: WL-500g Premium
Firmware: 1.7.2.7-7g (Thanks Oleg)

Device: WORKING with no config needed
Brandname: Logitech
Brandtype: QuickCam 4000 PRO

kernel: pwc Logitech QuickCam 4000 Pro USB webcam detected.
01-03-2008, 13:30
edberg

Tested@
Model: WL-500gPremium
Firmware: 1.9.7.5 (tested)

Device NOT WORKING
Brandname: Philips
Brandtype: USB PC Camera SPC600NC
16-01-2009, 20:52
Bodensee77

Logtech Webcam Sphere AG working?

Hi,

according to this forum the Logitech Sphere is working. I can also read that there are different Spere models out in the market.

Does anyone know if the lastest Sphere AF model is working with the ASUS WL500gP V2 router? It's a webcam with pan/tilt function.

Here's the link: http://www.logitech.com/index.cfm/we.../3480&cl=at,de

Thank you for your support!
03-02-2009, 14:14
grifu

Tested@
Model: WL500gp
Firmware: oleg 1.9.2.7-10
Device NOT WORKING
Brandname: Hercules
Brandtype: Classic Link
09-07-2009, 00:05
EdP

Here's my contribution to the list.

Tested@
Model: WL500gx
Firmware: Oleg 1.9.2.7-10
Device NOT WORKING
Brandname: Panasonic
Brandtype: NV-GS11 (handycam with webcam mode)

Tested@
Model: WL500gx
Firmware: Oleg 1.9.2.7-10
Device NOT WORKING
Brandname: Microsoft
Brandtype: LifeCam VX-1000

Tested@
Model: WL500gx
Firmware: Oleg 1.9.2.7-10
Device NOT WORKING
Brandname: Logitech
Brandtype: QuickCam E2500
25-11-2009, 13:03
Winne2Koslowski

Tested@
Model: Asus WL HDD
Firmware: Oleg 1.9.2.7-7g

Device NOT WORKING

Brandname: CREATIVE
Brandtype: Creative Live! Cam Video IM
04-12-2009, 21:57
Winne2Koslowski

Tested@
Model: Asus WL HDD
Firmware: Oleg 1.9.2.7-7g

Device NOT WORKING

Brandname: TERRATEC
Brandtype: TerraCAM USB Pro

It is the OV518+ Version

There are Several Terracam Versions, see this list for controllers used in USB cameras:
http://webcam-osx.sourceforge.net/cameras/index.php
05-12-2009, 18:20
Winne2Koslowski

Tested@
Model: Asus WL HDD
Firmware: Oleg 1.9.2.7-7g

Device NOT WORKING

Brandname: Logitech
Brandtype: QuickCAM Express

Produkt-ID: 0x0840
Hersteller-ID: 0x046d (Logitech Inc.)
19-02-2010, 22:38
ZiLeG

Logitech QuickCam 3000 for Business

Tested@
Model: WL-500gp v1
Firmware: 1.9.2.7-10.7

Device NOT WORKING
Brandname: Logitech
Brandtype: QuickCam® 3000 for Business
USB Interface: USB 2.0 compliant
URL To manufacturer: http://www.logitech.com
URL To product: click

kernel: usb.c: USB device 2 (vend/prod 0x46d/0x9a5) is not claimed by any active driver.
19-02-2010, 22:45
ZiLeG

Logitech QuickCam E3500

Tested@
Model: WL-500gp v1
Firmware: 1.9.2.7-10.7

Device NOT WORKING
Brandname: Logitech
Brandtype: QuickCam® E3500
USB Interface: USB 2.0 compliant
URL To manufacturer: http://www.logitech.com
URL To product: click

kernel: usb.c: USB device 3 (vend/prod 0x46d/0x9a4) is not claimed by any active driver.

Show 40 post(s) from this thread on one page