:D http://oleg.wl500g.info/gp/
Please note, that it does not have a download machine, but it has "Output Power" setting. :)
Printable View
:D http://oleg.wl500g.info/gp/
Please note, that it does not have a download machine, but it has "Output Power" setting. :)
About the oleg firmware.
Im have just bought the 500gp, and have no exprerience with asus and there routers. I have now tried the web based control manager for the device. And generally it sucks. I can't set permissions / user right for shared usb harddisks :(
If i install the oleg firmware. Is this the precise same GUI like the standard supplied software from asus? (except the modifications from oleg)
Can I install all the wl-500 ikgp packages in this firmware?Quote:
Originally Posted by Oleg
Does it have telnet?
Yes, you can. It's the same as wl500g deluxe firmware.
Hi, first of all, I'm new here :)
haven't tried the oleg firmware yet, but I was wondering
A friend of mine is using SSH/Telnet over the internet to tell his server to send the magic packet to the desired pc, so that that pc will turn on with Wake on lan (WOL)
is it possible to implement such thing in the router?
and make him remember one pc's mac to turn it on after hours or days with WOL?
thank you :)
Oleg's firmware contains ether-wake.
usage: ether-wake [-i <ifname>] [-p aa:bb:cc:dd[:ee:ff]] 00:11:22:33:44:55
This program generates and transmits a Wake-On-LAN (WOL) "Magic Packet",
used for restarting machines that have been soft-powered-down
(ACPI D3-warm state). It currently generates the standard AMD Magic Packet
format, with an optional password appended.
The single required parameter is the Ethernet MAC (station) address
of the machine to wake. This is typically retrieved with the 'arp'
program while the target machine is awake.
Options:
-b Send wake-up packet to the broadcast address.
-D Increase the debug level.
-i ifname Use interface IFNAME instead of the default 'eth0'.
-p <pw> Append the four or six byte password PW to the packet.
A password is only required for a few adapter types.
The password may be specified in ethernet hex format
or dotted decimal (Internet address)
-p 00:22:44:66:88:aa
-p 192.168.1.1
You can write scripts where you remember the MAC adress of the desired PC ;-)
Edit: Sorry, this syntax is for an extended version of ether-wake I have installed on my WL-500gx. In Oleg's firmware busybox handles ether-wake.
BusyBox v1.01 (2006.01.07-10:53+0000) multi-call binary
Usage: ether-wake [-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC
allright =D my wishes were allready fulfiled =DQuote:
Originally Posted by MMCM
Thanks again =)
now I'll have to find out the script part :) I'm new to the linux world also =)
I tried Olegs wl-500gP firmware.
Everything works great but when i enable the 32mb of ram with
than, my ethernet ports are dead.Code:nvram set sdram_init=0x0009
nvram set sdram_ncdl=0
nvram commit
reboot
Did anybody have the same promblems?
Hi,
I'm using the latest build from Oleg for the WL-500gp and I'm trying to use "ipkg.sh" to install the VPN Cisco client for openwrt (vpnc) and I get some errors from ipkg when installing not just vpnc but anything.
Is it compatible? Where can I find a guide for ipkg.sh for Oleg firmware?
Thanks in advance
I had the same problem, too.Quote:
Originally Posted by ttsherpa
For ipkg look here: http://www.macsat.com/macsat/content/view/22/29/
Up ? same problem !! have you go a solution ? :confused:
Quote:
Originally Posted by britnet
Why does the router write this:
wget: esd: Read-only file system
It happen why i try to execute this:
wget http://home.in.tum.de/%7Epustka/mipsel/esd
Im running olegs latest firmware 1.9.2.7-7f-pre3
Hello!
I hope this is the right thread to post my question!
I baught a WL-500gP yesterday to use it as Home-Gateway with Austrian Internet provider AON (AONspeed)
It should connect to an Speedtouch 510i ADSL Modem.
With windows the connection worked with adress 10.0.0.140 for the network card and VPN connection to the modem which has 10.0.0.138.
I also used this connection with linux which was pretty simple (pppd/pptp 10.0.0.138)
My problem is that i can't get an internet connection with my WL-500gP. I used the PPTP option, local WAN adress 10.0.0.140 - Standardgateway 10.0.0.138, but the response in the log is all few seconds "input/output error: can't get channel number"
I updated to the latest official firmware, but the errors stayed the same.
I also searched this forum, but found nothing similar to my problem.
I would be very glad if you could provide me some help.
Is it possible that i could solve my problems with olegs firmware? I've seen its ins state "preview 4".
With best regards
I'm running a WL-500gx (1.9.2.7-7e) with Speedtouch Home and AON with following settings:Quote:
Originally Posted by Eddie1
IP Config - WAN & LAN
WAN Connection Type: PPTP
WAN Connection Speed: Auto
WAN IP Setting
IP Address: 10.0.0.140
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.138
WAN DNS Setting
Get DNS Server automatically? Yes
PPPoE, PPTP or L2TP Account
Username: <10 Digit Number from AON (Teilnehmerkennung)>
Password: <Kennwort from AON>
Idle Disconnect Time in seconds(option): 0
MTU: 1492
MRU: 1492
Service Name(option): <empty>
Access Concentrator Name(option): <empty>
Additional pppd options: <empty>
Enable PPPoE Relay? No
Special Requirement from ISP
Host Name: WL-500gx
MAC Address: <empty>
Heart-Beat Server: <empty>
Any important differences?
best regards
Martin
Hi Martin and thank you for your quick response!
Basically everything is the same.
Just the DNS Servers are entered manually, but I didn't try them automatic ever.
As far as I remember MTA and MTU are disabeled, but the default settings are the same.
I didn't entered an hostname till now, but i will try it in the next hour.
My actual firmware version is 1.9.6.9 but i will also try olegs 1.9.2.7-7e for the 500gP.
I'll give an update as soon as I tried it!
BRGDS
Eddie
does anybody has problems with the FTP stuff??
cuz sometimes when I want to login it keeps saying that I can't be logged in and that I'm not in the users list.
it sucks while I did configured myself in the ftp of the router
with the 250GB I can understand that, but with the 1GB???
freaking thing, loL :)
Hello again!
Olegs 1.9.2.7-7f-pre4 was the solution - thank you very much @oleg!
It seems to me that the official firmware doesn't do everything in the right way - standards FTW ;-)
The same settings as before, and it worked immediately.
Also the log-output is al lot more meaningful for me as I am familiar with linux, and the now possible telnet-connection... wel, lets see what i can do with it :-)
Also thanks again @martin for your help!
BRGDS
Eddie
Any chance the Premium will have streaming mp3 capabilities in it (standard firmware or a developed one) so I can hook up a normal USB HDD and use it with something like Squeezebox or a Pinnacle Soundbridge?
The squeezebox uses SlimServer and the Soundbridge uses MT-DAAPD (and FireFly).
okeey I got the FTP stuff, weird thing =)
edit: deleted a noobish question
edit: is there a link for newer ipkg packages that I a noob like me can install? :)
edit again =) : I know there is dropbear for SSH, but I'm not familiar with it, but is it possible to activate SSH like Telnet?
Thank you vewy much ::)
Hello again!
I got another strange problem with my 500gP...
It concerns the DNS behavior.
I connect to the router with 2 machines: 1WinXP with LAN Cable - everything works well.
But when I connect via WLAN with my Laptop, I cant get DNS resolving.
I can ping the DNS Server and any other IP in the web, but pinging for example www.google.com gives me a timeout.
One time resolving seemed to work (dont know why...), but i still got a timeout.
Ping www.google.com [66.249.85.99] mit 32 Bytes Daten:
Zeitüberschreitung der Anforderung.
ipconfig /all displays everything correct, including the DNS Servers.
Has anyone some experience with this behavior?
Thanks for the links. geeXboX uShare link sais:Quote:
Originally Posted by britnet
I guess it should work with M1000 SoundBridge too!Quote:
- Added new Microsoft Registrar service which fakes the authorization required to be able to stream to MS compliant Media Renderers.
- Updated AVI file MIME type for better compliance with UPnP devices.
- Better UPnP CDS compliance when request count and index are 0.
- Removed the nasty characters from UDN naming for compatibility issues.
- Force usage of libupnp >= 1.3.1 (previous versions of the library are buggy and should not be used).
- Support for XboX 360, D-Link DSM-320 and Roku SoundBridge M2000 Network Music Player devices.
if you use are wired connection to the router from the laptop, does the DNS resolving work? If yes, check your network filters on your router, dns seems blocked from wlan. If no, check dns-forwarders on the router and check whether there is anything wrong with your notebook.Quote:
Originally Posted by Eddie1
Another hint... if you're using DHCP check which dns-server gets submitted to your client. In M$ Windows, look at ipconfig /all.
markus
Here is my question:
Situation: ADSL to an SMC router with a 192.168.2.x subnet and computers, then my ASUS premium connects with Static IP as 192.168.2.253 and operation mode is set as Home Gateway. I have a desktop and a laptop connected to this router with LAN and sometimes WLAN. Everyting working fine, like internet, ftp e.t.c. Just the desktop and the laptop cannot ping each other. They can ping the router 192.168.1.1 but the 192.168.1.2 cannot ping the 192.168.1.3, so that is why I cannot reach the USB HD plugged in the router....
When I click on the show workgroup computers , nothing happens, actualy is says I have no rights to view or there are no computers...
Any ide what to do? or set? I am usin the latest official fw 1.9.6.9
thanx in advance
Yesterday i buyed WL-500gP and setup it :), internet working just fine, rest i didnt test i didnt have time. And i hope new firmware from oleg will come soon with all that delux have :))...
Thnx to all hier
I have a wl500gp router.
question is: can i connenct two external usb storage to the router?
my plan:
An usb 256/512mb pendrive for running linux programs (samba, ctorrent, mc etc...) and swap.
And an usb-hdd for torrent and ftp downloads?
Because now all (progs+downloads) on the hdd but the hdd not on always and this 'confusing' the router.
thanks
There are two USB ports.. why should they add two ports if only one can be used? Offcourse you can use both for external use.