Firmware v1.7.5.6 CR5 [Oleg]

Hi Oleg,
your previous help was great and my first wl500g is running great, including printer and samba

Now I'm trying to get samba running on a second wl500g , which is running in accesspoint mode while bridging to the first wl500g

Gluing the bits and pieces from this topic together i figured out the following
(AP has fixed ip 192.168.1.2)
nvram set bootCmd0="echo 127.0.0.1 localhost locahost.localdomain > /etc/hosts"
nvram set bootCmd1="echo 192.168.1.2 wl500g >> /etc/hosts"
nvram commit
reboot
Still no share showing up: what do I do wrong ??
It seemed that the share allways pointed to the first wl500g ; so I reflashed that one to the original (non samba) version, just to not get confused

Have you added smbd & nmbd to bootCmds? If so, have you checked contents of log files /var/log/smb & /var/log/nmb?

Everything works fine now , thanks again, now my next step will be to change the host name of both the accesspoints (have a third wl500 in the meantime )so I can distinguish between them, of course i will try it myself first with the help of the various topics here,
hope to get your help again if it works (again) not

Quote:

---

Originally Posted by Oleg

The problem is that this statistics are cleared during reboot. Current stats are available using ifconfig command.

---

Is it possible to put the output in a nice status website so we can view all the information easy in the lan (or wan). Eventually with an extra webserver ported on 81?

I'm trying to figure out how asus did it with the status page in asp but I don't have a clue how they get it working :(.