DynDNS Client - newB question

Printable View

Show 40 post(s) from this thread on one page

25-10-2004, 09:32
Styno

Quote:

Originally Posted by Spot

Now, there are two lines for ntp server settings in the web config. One with the correct parameters (time.nist.gov) and one that is blank. :o

You can fill in a second timeserver as a backup for the first. Click on the url on the right of the edit-field.

I've added a national timeserver as the second timeserver. Now the time gets set immediately after reboot.
25-10-2004, 09:53
daffy

Time server configuration

Perhaps a bit off-topic, but everyone using NTP might wish to have a look at

http://ntp.isc.org/bin/view/Servers/NTPPoolServers

Using one of these "dynamic" servers should guarantee that you always talk to a near-by, working server. I, for instance, use "europe.pool.ntp.org" although I *could* talk to the official German time servers at http://www.ptb.de/de/org/q/q4/q42/ntp/ntp_main.htm, too.
25-10-2004, 12:37
Oleg

Quote:

Originally Posted by Spot

I've tried 1.8.1.7-2a...
Things seem to be fixed... but after some "reboot" ntp service fails again!

I don't know if it is the reason, but it happens when I run busybox_httpd.

Now, there are two lines for ntp server settings in the web config. One with the correct parameters (time.nist.gov) and one that is blank. :o

Have you checked, that web iface reports version 2a? Also, you need to flash trx from the wl500g-1.8.1.7-2a.zip, not the trx in the 1.8.1.7-2a directory.
25-10-2004, 13:39
Styno

Quote:

Originally Posted by Oleg

Have you checked, that web iface reports version 2a? Also, you need to flash trx from the wl500g-1.8.1.7-2a.zip, not the trx in the 1.8.1.7-2a directory.

May I ask why? (I've flashed with trx form the download dir as well, because the link was not working at the time..).
25-10-2004, 13:55
Oleg

Quote:

Originally Posted by Styno

May I ask why? (I've flashed with trx form the download dir as well, because the link was not working at the time..).

Well, files in this dir are build using ASUS batch build and not tested.
25-10-2004, 14:02
Styno

Quote:

Originally Posted by Oleg

Well, files in this dir are build using ASUS batch build and not tested.

Well, firmware is working properly :D
26-10-2004, 10:43
Spot

Quote:

Originally Posted by Oleg

Have you checked, that web iface reports version 2a? Also, you need to flash trx from the wl500g-1.8.1.7-2a.zip, not the trx in the 1.8.1.7-2a directory.

Yes, version is 1.8.1.7-2a and it's the zipped one!

Yesterday, I've downgrade to 1.6.x.x + hardware reset, then upgrade to 1.8.1.7-2a + hardware reset... and I've made several reboots.

Since these manipulations, NTP (and dyndns update at the same time) seems to work fine :rolleyes:

I'll keep on testing.
29-10-2004, 16:27
Kwah

Quote:

Originally Posted by Spot

Since these manipulations, NTP (and dyndns update at the same time) seems to work fine :rolleyes:

Sorry, how may I check that dyndns update working? :rolleyes: I've tried something like
$cat /tmp/syslog.log | grep dns
no traces at all in log-file...
19-07-2005, 19:20
Teddy

wl500g: dyndns with common bind/named?

I have a small server with bind/named running (outside of my home-network, with public static-IP), authorised for my 2nd-level com-domain. Up to now it serves just its own interfaces...

Now I want it to assign fqdn also for my wl500g/wan interface, which must be dynamically assigned when my router starts up and dis-assigned when wl500g shuts down.

I know wl500g can use some public dyndns services (like dyndns.org), but how can I use a common bind/named server for a dynamic domain_name_to_IP resolution (I have dynIP from ISP for my wl500g)??? What procedure wl500g uses for dynamic dns when contacting dyndns.org? Can the same procedure be used with a common bind/named too?
29-09-2005, 20:39
MMCM

Same problem

Static DynDNS doesn't work for me either.
I have a WL-500g deluxe with WL500g-1.9.2.7-6b running from USB hard disk.

Would you send me the fix too, please?

Thanks
Martin
14-11-2005, 23:33
kraai

automatic update dyndns every 25 days ?

Hi,

I have searched for this on this forum and couldn't find it.
With a free account on dyndns a renewal is needed within every 30 days.

according to the website of dyndns:
"you may update 24-35 days after your previous update with the same IP address to "touch" the record and prevent it from expiring."

Is it possible to let the router update the account automatically ?

like this program does.
http://www.nord-vision.de/data/index...che=2&seite=58
regards,

kraai.
15-11-2005, 01:14
don tunante

Quote:

Originally Posted by kraai

Hi,

I have searched for this on this forum and couldn't find it.
With a free account on dyndns a renewal is needed within every 30 days.

according to the website of dyndns:
"you may update 24-35 days after your previous update with the same IP address to "touch" the record and prevent it from expiring."

Is it possible to let the router update the account automatically ?

like this program does.
http://www.nord-vision.de/data/index...che=2&seite=58
regards,

kraai.

if you have Oleg's fw, you can launch ez-ipupdate from your post-mount script
about ez-ipupdate configuration see: http://leaf.sourceforge.net/doc/guid...u-ezipupd.html there you can find the option "max-interval"
however you may want to consider to change to their static-dns service: http://www.dyndns.com/services/dns/statdns/
03-01-2006, 18:01
Grabber66

Dyndns and ???

Hello,
i've tested the Dyndns-funktion of the Router.
The account works, but is redirected to the "normal" www-folder.
Can i change the dyndns-acc to the php-www folder (/opt/share/www).

thx
03-01-2006, 21:44
ACluk90

Actually DynDNS is just redirecting the Internet-Address (ex. www.ddu.dyndns.org) to your IP address. Internet browsers usally try the port 80 and it seems, that on this port another webserver, which shows the content of the "normal" www-folder, is active. So you have to change to port of the normal server for example to 8080 and the port of the php-server to 80.

Hope it helps,
ACluk90
03-01-2006, 22:04
Grabber66

Sounds good, but where can i change the ports of the webserver ?
30-08-2006, 20:22
atikman

DynDNS not updating

Hi all,

I'm a bit new on firmware tweaking :) , but i did it, and flashed 1.9.2.7-7f-pre5-CDMA on my box. Everything works smoothly well, except one thing: DDNS doesn't update my IP.

I've checked the log, and a message is shown:

ddns update: could not resolve ip address for vlan1

The current IP is correctly shown on the status screen, and if I go to DynDNS.org and updtate it manually on the browser, it works beautifully. Untill the next dropped connection, that is... :(

I'm currently using an USB CDMA modem. Could it be that vlan1 doesn't correspond to the modem interface? Any other idea of what could it be?

Thanks!

Rui

Show 40 post(s) from this thread on one page