Printable View
Hah! You would say that after I just splurged on a hub and a usb drive :)Quote:
Originally Posted by Veri
Incidentally, the semi-colon got included in your url for wl500g.dyndns.org. It gives a 404 at the moment, although anyone who gets this far probably knows enough to figure it out.
Oh well, once more into the breach and all that..
Well, I tried it!
Trouble is ppp0 never comes up. I found this in the log file.
Code:Info >1024< pppoa3 version 1.3 started by foozle (uid 0)
[Thu Jan 1 00:12:16 1970] Info >1024< Control thread ready
[Thu Jan 1 00:12:16 1970] Info >1024< Modem found!
[Thu Jan 1 00:12:16 1970] Info >1026< host --> pppoa3 --> modem stream ready
[Thu Jan 1 00:12:16 1970] Info >2051< modem --> pppoa3 --> host stream ready
[Thu Jan 1 00:12:47 1970] Error >1026< Error reading from source device
Reason : Input/output error
Info >1026< Cleaning Read from usb data
[Thu Jan 1 00:12:47 1970] Error >1024< Woken by a sem_post event -> Exiting
Info >2051< Cleaning Write to usb data
Info >1024< Write to usb Canceled[Thu Jan 1 00:12:47 1970] Info >1024< Closing PPPoA3 log file
There's nothing the connect error file, which, combined with the "reading from source device" error, suggests that I'm not even getting off platform.
Does anyone have any ideas on how to go about finding a solution?
One thing: I have one of the revision four silver devices. I've got the proper firmware - at least it works when the blasted thing is attacked to my desktop box.
Oh well, reverting to previous usage for the time being... :confused:
I have built packages for openwrt that might also be useful for oleg's firmware. I am keen to hear feedback: The instructions for configuring them are located here, though note you can skip step 1, starting by installing the standard openwrt firmware.
Hi everyone,
I'm interested to have CDCEther kenrel module compiled in order to make use of my Terayon TJ-715 cable modem connected to the router via USB.
Here is the guide that describes how set up my modem under Linux
http://www.freewebs.com/linuxnet/CableUSBLinuxEn.html
If someone here has a build environment set up and fortunately has compiled CDCEther.o module for MIPS - I'll be very thankful if you share it with me.
P.S. I'm trying to make use of USB firmware located at
http://koppel.cz/cdmawifi/download/166/
- Due to a similar filename it seems like modified Oleg's firmware with USB support (pls correct me if I'm wrong). Anyway the firmware looks very similar to the Oleg's one and it also contains web UI to configure USB modem as backup connection - that's what I'm trying to achieve.
I'll appreciate any help and/or tips regarding this.
This reminds my of getting our P90 router running the speedtouch frog. It's perfectly possible, though the speetouch .o file is not redistributable _I think_ (boo?).
It's perfectly possible to have it all working from one firmware file, with some work.
Unfortunately I now use ethernet or I would have a go. Shame I have to use PPPOA though
They do provide a solution and firmware as well:
http://koppel.cz/cdmawifi/english/
http://koppel.cz/cdmawifi/
Most of the forum QAs and info is in Czech...
Seff