apparently you are using a different version of 'ps' then i do.
Is the result the same if you run:
/opt/bin/ps
otherwise try this and the run ps again:
ipkg update
ipkg install busybox
Printable View
apparently you are using a different version of 'ps' then i do.
Is the result the same if you run:
/opt/bin/ps
otherwise try this and the run ps again:
ipkg update
ipkg install busybox
I didnt kill any processes this time
Code:[admin@WL-500GP root]$ ps
PID Uid VmSize Stat Command
1 admin 396 S /sbin/init
2 admin SW [keventd]
3 admin RWN [ksoftirqd_CPU0]
4 admin SW [kswapd]
5 admin SW [bdflush]
6 admin SW [kupdated]
7 admin SW [mtdblockd]
59 admin 332 S httpd vlan1
65 admin 288 S klogd
68 admin 248 S nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
70 nobody 260 S [dnsmasq]
72 admin SW [khubd]
80 admin 184 S lpd
83 admin 188 S p9100d -f /dev/usb/lp0 0
86 admin 252 S waveservermain
88 admin 252 S rcamdmain
92 admin DW [usb-storage-0]
93 admin SW [scsi_eh_0]
103 admin 224 S infosvr br0
104 admin 432 S watchdog
106 admin 276 S ntp
115 admin 300 S dropbear
129 admin 312 S udhcpc -i vlan1 -p /var/run/udhcpc0.pid -s /tmp/udhcpc
131 admin 480 S dropbear
132 admin 488 S -sh
152 admin SW [kjournald]
153 admin SW [kjournald]
181 admin 328 S /sbin/syslogd -m 0 -O /opt/var/log/syslog.log -S -l 7 -s 0
186 admin 264 S /opt/sbin/cron
195 admin 340 S /opt/sbin/xinetd -pidfile /var/run/xinetd.pid
200 admin 2336 S /opt/bin/php-fcgi -b 1026
208 nobody 960 S [proftpd]
226 admin 408 S /bin/sh /opt/bin/mysqld_safe --datadir=/opt/var/lib/mysql --pid-file=/opt/var/lib/mysql/WL-500GP.pid
296 admin 1040 S /opt/bin/php-fcgi -b 1026
319 admin 496 S < /opt/sbin/smbd -D
323 admin 772 S /opt/sbin/nmbd -D
331 admin 724 S /opt/libexec/mysqld --basedir=/opt --datadir=/opt/var/lib/mysql --user=root --pid-file=/opt/var/lib/mysql/WL-500GP.pid --skip-exte
334 admin 724 S /opt/libexec/mysqld --basedir=/opt --datadir=/opt/var/lib/mysql --user=root --pid-file=/opt/var/lib/mysql/WL-500GP.pid --skip-exte
335 admin 724 S /opt/libexec/mysqld --basedir=/opt --datadir=/opt/var/lib/mysql --user=root --pid-file=/opt/var/lib/mysql/WL-500GP.pid --skip-exte
338 admin 9760 R /opt/bin/transmission-daemon -a *.*.*.* -g /mnt/transmission-daemon -T -w /mnt/Downloads -l 20
339 admin 9760 S /opt/bin/transmission-daemon -a *.*.*.* -g /mnt/transmission-daemon -T -w /mnt/Downloads -l 20
340 admin 9760 R /opt/bin/transmission-daemon -a *.*.*.* -g /mnt/transmission-daemon -T -w /mnt/Downloads -l 20
341 admin 9760 R /opt/bin/transmission-daemon -a *.*.*.* -g /mnt/transmission-daemon -T -w /mnt/Downloads -l 20
349 admin 464 S upnp -D -L br0 -W vlan1
351 admin 396 R ps
Ok, not too much memory consumption by the running processes.
Probably it's the buffer/cache that is giving the problem. Part of the memory (which is only 32MB) is reserved to cache frequently used data. The result is that it leaves even less memory to run your processes in.
Thus, it's best to switch this cache off. (not sure how)
Can you remember at which point you activated the cache?
Not too sure when and how I did it as well. Would have been when I was following one of the tutorials, I think olegs or wengis to setup everything including my external.