Printable View
That means that you didn't upgrade to 1.9.2.7 properly.Quote:
Originally Posted by cardoso
Push the reset button on the back of the router for at least 10 seconds while power is applied. That resets your router to its default factory settings. After that you'll have logon with default username/password and reconfigure your router. Then your router is correctly upgraded.
You can login to telnet with the same username/password as the webinterface.
I'm also suggesting to reset to defaults. Empty user name indicates, that you've upgraded from older (pre 1.8.x.x firmware) and has not reseted to defaults. This could cause problems, due to the fact, that firmware is seriously changed and some of the options supported earlier could cause problems with new firmware. BTW, it's still possible to telnet to your router - firmware defaults to root if username is empty.
Hello people!!
Add Portugal to the Time Zone! :(
Portugal are like (GMT) England !
thks for this forum :)
Merry Christmas and good programing!
on 1.9.2.7-1 (2004-12-17) not work WPA in WDS
on 1.8.1.7-3 (2004-11-15) work fine
You need to specify WPA mode, which you are trying to use. There was already reported, that TKIP+AES does not work. Unfortunatly, this code could not be fixed, due to the fact that it's binary only, so I'm suggesting you to use 1.8.1.7-3 or 1.8.1.9.Quote:
Originally Posted by Viper_Rus
I have this problem to!! with the whole wpaQuote:
Originally Posted by piri
Strange thing..it appears that scp is present in the firmware, but ssh lacks. So because scp cannot work without ssh, it is a waste of space to hold it, but it would also be nice if it worked too :).
You just need to start scp from the PC, not from the wl500g itself.Quote:
Originally Posted by chupra
Quote:
Originally Posted by Oleg
Hello Oleg,
since I upgrade FW to 1.9.2.7-3b, my syslog is filling with these messages from Bridge:
There is several WL500g connected to this one in WDS mode.Code:Jan 17 11:57:03 kernel: br0: received tcn bpdu on port 1(eth0)
Jan 17 11:57:03 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 11:57:05 kernel: br0: received tcn bpdu on port 1(eth0)
Jan 17 11:57:05 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 11:57:07 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:07 kernel: br0: received tcn bpdu on port 1(eth0)
Jan 17 11:57:07 kernel: br0: topology change detected
Jan 17 11:57:09 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:11 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:13 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:15 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:17 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:19 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:21 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:23 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:25 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:28 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 11:57:28 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 11:57:30 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:31 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 11:57:31 kernel: br0: topology change detected
Jan 17 11:57:32 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 11:57:32 kernel: br0: topology change detected
Jan 17 11:57:32 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:34 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:35 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 11:57:35 kernel: br0: topology change detected
Jan 17 11:57:36 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:38 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 11:57:38 kernel: br0: topology change detected
Jan 17 11:57:38 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:40 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:41 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 11:57:41 kernel: br0: topology change detected
Jan 17 11:57:42 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:44 kernel: br0: retransmitting tcn bpdu
Jan 17 11:57:46 kernel: br0: retransmitting tcn bpdu
Jan 17 11:58:10 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 11:58:10 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 12:45:43 kernel: br0: received tcn bpdu on port 1(eth0)
Jan 17 12:45:43 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 12:45:45 kernel: br0: retransmitting tcn bpdu
Jan 17 12:45:47 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:12 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:12 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 12:46:13 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:13 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 12:46:15 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:15 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:15 kernel: br0: topology change detected
Jan 17 12:46:17 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:17 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 12:46:19 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:19 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:19 kernel: br0: topology change detected
Jan 17 12:46:21 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:23 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:24 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:24 kernel: br0: topology change detected
Jan 17 12:46:25 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:26 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:26 kernel: br0: topology change detected
Jan 17 12:46:27 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:29 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:29 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:29 kernel: br0: topology change detected
Jan 17 12:46:31 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:32 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:32 kernel: br0: topology change detected
Jan 17 12:46:33 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:34 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:34 kernel: br0: topology change detected
Jan 17 12:46:35 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:36 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:36 kernel: br0: topology change detected
Jan 17 12:46:37 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:37 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:37 kernel: br0: topology change detected
Jan 17 12:46:39 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:40 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:46:40 kernel: br0: topology change detected
Jan 17 12:46:41 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:43 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:45 kernel: br0: retransmitting tcn bpdu
Jan 17 12:46:47 kernel: br0: retransmitting tcn bpdu
Jan 17 12:47:12 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:47:12 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 12:47:13 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:47:13 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 12:47:14 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:47:14 kernel: br0: topology change detected
Jan 17 12:47:15 kernel: br0: retransmitting tcn bpdu
Jan 17 12:47:16 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:47:16 kernel: br0: topology change detected
Jan 17 12:47:17 kernel: br0: retransmitting tcn bpdu
Jan 17 12:47:18 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:47:18 kernel: br0: topology change detected
Jan 17 12:47:19 kernel: br0: retransmitting tcn bpdu
Jan 17 12:47:21 kernel: br0: retransmitting tcn bpdu
Jan 17 12:47:43 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 12:47:43 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 21:25:31 kernel: br0: received tcn bpdu on port 1(eth0)
Jan 17 21:25:31 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 21:25:33 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:02 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:02 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 21:26:02 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:02 kernel: br0: topology change detected
Jan 17 21:26:04 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:06 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:08 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:10 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:12 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:14 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:16 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:18 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:20 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:22 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:24 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:26 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:28 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:28 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 21:26:30 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:31 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:31 kernel: br0: topology change detected
Jan 17 21:26:32 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:33 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:33 kernel: br0: topology change detected
Jan 17 21:26:34 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:37 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:37 kernel: br0: topology change detected, sending tcn bpdu
Jan 17 21:26:39 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:39 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:39 kernel: br0: topology change detected
Jan 17 21:26:41 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:41 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:41 kernel: br0: topology change detected
Jan 17 21:26:43 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:43 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:43 kernel: br0: topology change detected
Jan 17 21:26:45 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:45 kernel: br0: received tcn bpdu on port 3(wds0.49156)
Jan 17 21:26:45 kernel: br0: topology change detected
Jan 17 21:26:47 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:49 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:51 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:53 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:55 kernel: br0: retransmitting tcn bpdu
Jan 17 21:26:57 kernel: br0: retransmitting tcn bpdu
Operation mode is set to Router, but no routing is currently used (WAN interface isn't connected).
During this, WLAN hardly respond to ping for about 2 minutes. After then, everything works well (as before).
I have also several WL500g running FW 1.7.5.9-5 in similar setup and there is no such messages in the syslog as there are no blackouts with continuous ping.
What's wrong?
Forgot to add bridge configuration:
Code:brctl showbr br0
br0
bridge id 8000.00112fde2120
designated root 8000.00112f90e834
root port 5 path cost 100
max age 20.00 bridge max age 20.00
hello time 2.00 bridge hello time 2.00
forward delay 0.00 bridge forward delay 0.00
ageing time 42.30 gc interval 4.00
hello timer 0.00 tcn timer 0.00
topology change timer 0.00 gc timer 3.74
flags
eth0 (1)
port id 8001 state forwarding
designated root 8000.00112f90e834 path cost 100
designated bridge 8000.00112fde2120 message age timer 0.00
designated port 8001 forward delay timer 0.00
designated cost 100 hold timer 0.66
flags
eth2 (2)
port id 8002 state forwarding
designated root 8000.00112f90e834 path cost 100
designated bridge 8000.00112fde2120 message age timer 0.00
designated port 8002 forward delay timer 0.00
designated cost 100 hold timer 0.66
flags
wds0.49156 (3)
port id 8003 state forwarding
designated root 8000.00112f90e834 path cost 100
designated bridge 8000.00112fde2120 message age timer 0.00
designated port 8003 forward delay timer 0.00
designated cost 100 hold timer 0.66
flags
wds0.49154 (4)
port id 8004 state forwarding
designated root 8000.00112f90e834 path cost 100
designated bridge 8000.00112fde2120 message age timer 0.00
designated port 8004 forward delay timer 0.00
designated cost 100 hold timer 0.66
flags
wds0.49155 (5)
port id 8005 state forwarding
designated root 8000.00112f90e834 path cost 100
designated bridge 8000.00112f90e834 message age timer 0.66
designated port 8004 forward delay timer 0.00
designated cost 0 hold timer 0.00
flags
wds0.49153 (6)
port id 8006 state forwarding
designated root 8000.00112f90e834 path cost 100
designated bridge 8000.00112fde2120 message age timer 0.00
designated port 8006 forward delay timer 0.00
designated cost 100 hold timer 0.66
flags
Pekr--try a more recent firmware, like 1.9.2.7-3c or 1.9.2.7-4. I think I read something previously about there being annoying debug messages in one of the earlier firmwares, and this might be one of them.
tomilius:
Thanks for tip, I will try.
To be more specific - I haven't problem with these messages but with link unavailability during these 'topology changes'. Last time it took about 15 minutes.
Now I've try to disable STP:
Seems to help so far...Code:brctl stp br0 disable
Code:nvram set lan_stp=0
nvram commit
After few days with:Quote:
Originally Posted by Oleg
everything looks good (no error at any AP).Code:brctl stp br0 disable
Thanks for nvram setting Oleg!