ADOS: a probable replacement for Download Master

Printable View

Show 40 post(s) from this thread on one page

23-08-2008, 20:19
holla

thanks very much for ur answer but how do I extract that file???

i done

Code:

wget http://download.dini.su/ados/stable

and then I tried

Code:

tar xvzf ados_1.3.8_build_73.tar.gz

and

Code:

tar -xf ados_1.3.8_build_73.tar.gz

but none of this worked :S

proabably it's easy to do this but I need ur help again :)

I done this all http://wl500g.info/showpost.php?p=85256&postcount=2..

and now I'm stuck here http://wl500g.info/showpost.php?p=85259&postcount=3
23-08-2008, 21:11
holla

hi
thanks.
and how to I get it and extract it?

regards
23-08-2008, 21:42
raas

Quote:

Originally Posted by holla

hi
thanks.
and how to I get it and extract it?

regards

Hi,

this is the actual install thread. first 4-5 post are how to install it.
24-08-2008, 01:36
holla

hmm ok then.

Now I'm getting an error "tar: Invalid tar magic" when trying to "tar -xzvf" ados file.

I supose I have to do that before trying this "http://my.router:8080" (when I try it I only get "lighttpd server is running").

I installed this and configured like the post says. But now I need do download ados and unzip it right??????

Code:

ipkg update ipkg install cron ipkg install lighttpd ipkg install sqlite ipkg install php-fcgi ipkg install libcurl ipkg install wget ipkg install php-gd ipkg install php-mbstring

Thanks again for ur help.
I really apreciate it

HEEELPPP :D
25-08-2008, 00:42
holla

I made it.

I unpacked all the stuff and zipped it and hosted it at my server.

Installed ipkg unrar

cd to /opt/share/www and wget myserver.com/ados.zip

and tried 192.168.1.1/8080/install/index.php and then I finally got some image :D

Now I'm going to explore a little bit and if I have questions I'll post them.

best regards
25-08-2008, 04:26
mark_q4xprt

i`ve followed the steps and now im encountering problems

[admin@WL-500G root]$ /opt/etc/init.d/S10cron
/opt/etc/init.d/S10cron: /opt/etc/init.d/S10cron: 8: /opt/sbin/cron: not found
--------------------------------------------------------
[admin@WL-500G root]$ /opt/etc/init.d/S80lighttpd start
Starting web server: lighttpd
/opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
-------------------------------------------------------

here are the steps i took

Configuring IPKG system.
echo "src unslung http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable" > /opt/etc/ipkg.conf
echo "dest root /" >> /opt/etc/ipkg.conf
ipkg update && ipkg install uclibc-opt && awk '/^Package:/{system("ipkg install -force-reinstall -force-defaults " $2)}' /opt/lib/ipkg/status

ipkg update
ipkg install cron
ipkg install lighttpd
ipkg install sqlite
ipkg install php-fcgi
ipkg install libcurl
ipkg install wget
ipkg install php-gd
ipkg install php-mbstring

nano /opt/etc/lighttpd/lighttpd.conf and uncomment (remove ‘#’ at the beginning) these strings: "mod_access",
"mod_fastcgi",
"mod_cgi",
"mod_accesslog"

server.document-root = "/opt/share/www/"

server.port = 8080

fastcgi.server = ( ".php" =>
( "localhost" =>
(
"min-procs" => 1,
"max-procs" => 1,
"max-load-per-proc" => 4,
"socket" => "/tmp/php-fastcgi.socket",
"bin-path" => "/opt/bin/php-fcgi"
)
)
)

Save changes and closed file

nano /opt/etc/php.ini
extension=pdo.so
extension=sqlite.so
extension=pdo_sqlite.so

nano /opt/etc/crontab
SHELL=/bin/sh
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/opt/sbin:/opt/bin
MAILTO=""
HOME=/
# ---------- ---------- Default is Empty ---------- ---------- #
*/1 * * * * admin /opt/bin/run-parts /opt/etc/cron.1min
*/5 * * * * admin /opt/bin/run-parts /opt/etc/cron.5mins
01 * * * * admin /opt/bin/run-parts /opt/etc/cron.hourly
02 4 * * * admin /opt/bin/run-parts /opt/etc/cron.daily
22 4 * * 0 admin /opt/bin/run-parts /opt/etc/cron.weekly
42 4 1 * * admin /opt/bin/run-parts /opt/etc/cron.monthly

nano /opt/bin/run-parts
#!/bin/sh
#
# runparts.sh by macsat@macsat.com
# intended for use with cron
#
# based on rc.unslung by unslung guys :-)
#
if [ -z "$1" ]
then
echo "Usage : $0 "
fi

RUNDIR=$1"/*"

for i in $RUNDIR ;do

# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue

case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set start
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i start
;;
esac
done

chmod +x /opt/bin/run-parts

mkdir /opt/etc/cron.1min
mkdir /opt/etc/cron.5mins
mkdir /opt/etc/cron.hourly
mkdir /opt/etc/cron.daily
mkdir /opt/etc/cron.weekly
mkdir /opt/etc/cron.monthly

flashfs save && flashfs commit && flashfs enable

and thats it, i experienced the problem

[admin@WL-500G root]$ /opt/etc/init.d/S10cron
/opt/etc/init.d/S10cron: /opt/etc/init.d/S10cron: 8: /opt/sbin/cron: not found
--------------------------------------------------------
[admin@WL-500G root]$ /opt/etc/init.d/S80lighttpd start
Starting web server: lighttpd
/opt/etc/init.d/S80lighttpd: /opt/etc/init.d/S80lighttpd: 40: /opt/sbin/lighttpd: not found
25-08-2008, 05:37
mark_q4xprt

i tried to reformat and heres my new problem

[admin@WL-500G root]$ /opt/etc/init.d/S80lighttpd restart
Starting web server: lighttpd
Duplicate config variable in conditional 0 global: fastcgi.server
2008-08-25 12:34:49: (configfile.c.885) source: cat /opt/etc/lighttpd/conf.d/*onf line: 15 pos: 1 parser failed somehow near here: (EOL)
25-08-2008, 14:44
holla

Quote:

Originally Posted by mark_q4xprt

i tried to reformat and heres my new problem

[admin@WL-500G root]$ /opt/etc/init.d/S80lighttpd restart
Starting web server: lighttpd
Duplicate config variable in conditional 0 global: fastcgi.server
2008-08-25 12:34:49: (configfile.c.885) source: cat /opt/etc/lighttpd/conf.d/*onf line: 15 pos: 1 parser failed somehow near here: (EOL)

do this

Code:

rm /opt/etc/lighttpd/conf.d/*
25-08-2008, 15:34
mark_q4xprt

Quote:

Originally Posted by holla

do this

Code:

rm /opt/etc/lighttpd/conf.d/*

thanks, after that whats the next step?

ive typed 192.168.0.1:8080 but it sed "The webpage cannot be displayed"
25-08-2008, 15:47
mark_q4xprt

ive extracted the ados to the www folder

No path to the executable file was specified for module 'Axel 1.1.5'.
No path to the executable file was specified for module 'Curl 1.1.5'.
No path to the executable file was specified for module 'Wget 1.1.5'.
25-08-2008, 15:59
holla

Code:

/opt/share/www/install/

I think thats it
25-08-2008, 16:06
mark_q4xprt

it seems i cant find axel

for curl ive set
/opt/bin/curl

for wget
/opt/bin/wget

which one will i use?

im just testing it to download this

http://download.nullsoft.com/winamp/...plus_en-us.exe

but its just on idle :confused:
25-08-2008, 16:34
mark_q4xprt

it doesnt want to download from microsoft site?

http://www.microsoft.com/downloads/i...XP-x86-enu.exe

why?
25-08-2008, 16:41
holla

same problem here....

downloads aren't accomplished... it says that they are downloading, but it doesn't download anything
25-08-2008, 16:51
mark_q4xprt

Event time 25.08.2008 23:43
Code ECD_007
Short message File's download is impossible
Description User has not enough disk space to save file.
Probable reason The user has exhausted the space on a disk, assigned him for saving downloaded files.
Solution Delete some downloaded files from your directories or ask administrator to increase disk space.

Miscellaneous
File ID 4
Filename cpuz_146.zip
File size, bytes 571781

i stamble upon the log and saw this,

but ive already set it to none limit or blank or 999999999 but its thesame error, i know i have a lot of space coz im using a newly bought 160g wd passport on this
25-08-2008, 21:54
holla

maybe its the swap memory.

try

Code:

df

or

Code:

free
26-08-2008, 02:20
mark_q4xprt

[admin@WL-500G root]$ df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 3008 3008 0 100% /
/dev/discs/disc0/part1 145138968 378316 137388024 0% /opt
[admin@WL-500G root]$ free
total used free shared buffers
Mem: 30172 25416 4756 0 5464
Swap: 524276 4464 519812
Total: 554448 29880 524568

is there something wrong from what i did in the partition?
the hdd is 160g, what is the correct partition for this?

fdisk /dev/discs/disc0/disc
d
n
p
2
< enter >
+151G
n < enter >
p < enter >
1 < enter >
< enter >
< enter >
t < enter >
2 < enter >
82 < enter >
w < enter >
mke2fs -j /dev/discs/disc0/part1
mkswap /dev/discs/disc0/part2
reboot
mount /dev/discs/disc0/part1 /opt
swapon /dev/discs/disc0/part2
26-08-2008, 11:49
holla

no fekin idea...

try saving downloads to

Code:

/dev/discs/disc0/part1

or to

Code:

/opt/share/www/

and you'r using an extra space which may be the difference here

Code:

mount /dev/discs/disc0/part1 /opt
27-08-2008, 14:21
mark_q4xprt

the probelm was fixed after i entered 1.4E+6 in the disk quota

now the only problem left is the dyndns

http://wl500g.info/showthread.php?t=...t=problem+oleg
27-08-2008, 16:19
holla

I'm getting this error

Code:

Code ECD_015 Short message File's download is impossible Description Can't open for writing file in the CRON directory. Probable reason The system has no rights to write to the specified directory or file. Solution * Make sure that the system has necessary write rights.

How can I solve this problem?
28-08-2008, 00:46
Kenny

I cannot download anything, files are in download tab forever. Please help!

EDIT: Solved, anyway downloads are a bit sluggish
07-09-2008, 18:48
DINI

Hello!

I apologize for not replying for a log time. The reason is simple: lack of time.

Unfortunately because of this reason I will not provide any support of my script. It is also unlikely that I will further develop this project.

Nevertheless the latest version is distributed under GPL v3 license. Therefore anyone now have an ability to add new features and fix bugs and use the source code of my script.

By the start of this day the script was downloaded 2636 times, and from the time the first beta have been released the script was downloaded more than 6000 times. I hope that my script was useful for everyone who have downloaded it. Of course it is not perfect and I wanted to make it better and more easy in use, but unfortunately not every dream comes true.

I hope that it is not the end of the project and somebody will develop it.
07-09-2008, 18:49
DINI
Attention: version 1.3.9 (build 74) is available.
See download link in the firs post of the topic.

To make an update replace files at the server with files from the downloaded archive (it is necessary to copy update directory) and then run the script from the browser. You will be redirected to the update page.

Added:
- Starting from this version the script is distrubuted under GNU GPL v3 license.
Fixed:
- Generating links when using secure connection with non-standard port (earlier secure connection was used only with standard 443 port) — thanks to many people for report.
08-09-2008, 11:37
raas

Dini,

Sorry to hear you're not maintaining this beautifull software package. But if time becomes an issue, one has got to decide

otoh, very nice you're 'donating' the source to the public. Many Thanks!!!

As I use ADOS every day, I will certainly take a look a the last released version.

Thanks again for writing and supporting this software
15-09-2008, 09:58
Trubkyn

Hi Guys,
anyone knows how to solve this problem:
Executable file of module 'Curl 1.1.5' is missing or its verion is unsupported. :confused:
Executable file of module 'Wget 1.1.5' is missing or its verion is unsupported. :confused:
?
Have installed these:
curl 7.19.0 (mipsel-unknown-linux-gnu) libcurl/7.19.0 OpenSSL/0.9.7m zlib/1.2.3
Protocols: tftp ftp http file https ftps
Features: IPv6 Largefile NTLM SSL libz

GNU Wget 1.11.4

Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://www.gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Originally written by Hrvoje Niksic <hniksic@xemacs.org>.
Currently maintained by Micah Cowan <micah@cowan.name>.

Thanks a lot!
16-09-2008, 14:44
Trubkyn

Quote:

Originally Posted by Trubkyn

Hi Guys,
anyone knows how to solve this problem:
Executable file of module 'Curl 1.1.5' is missing or its verion is unsupported. :confused:
Executable file of module 'Wget 1.1.5' is missing or its verion is unsupported. :confused:
?
Have installed these:
curl 7.19.0 (mipsel-unknown-linux-gnu) libcurl/7.19.0 OpenSSL/0.9.7m zlib/1.2.3
Protocols: tftp ftp http file https ftps
Features: IPv6 Largefile NTLM SSL libz

GNU Wget 1.11.4

Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://www.gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Originally written by Hrvoje Niksic <hniksic@xemacs.org>.
Currently maintained by Micah Cowan <micah@cowan.name>.

Thanks a lot!

Problem solved :)
This looks great! Thanks DINI
29-09-2008, 15:27
qseb

just to say thank you for ADOS, Dini!
Nice work :)
02-10-2008, 14:20
lordu

Hi Gays

Can anybody help me with these:
1) error message:
"Link field can't be blank."
I've tryed to insert this link:
ftp://cosma78.mine.nu/Torrenti%20uto...eyGen-ELYSiUM/

2)how can i access the lighttpd server on port 80 (without to specify the port - 8080, 8082, etc) and to keep firewall on ? I need this to host a small internet page

Thank you in advance!
16-10-2008, 20:31
holla

how can I configure my ados to download everyday on my happy hours???

from 2-7 every day

How do I schedule?? I tried many things but none worked
21-10-2008, 22:56
ebabinski

Quote:

Originally Posted by Kenny

I cannot download anything, files are in download tab forever. Please help!

EDIT: Solved, anyway downloads are a bit sluggish

How did you solve this problem? I just installed it using raas' headstart. Unfortunately, it doesn't start to download.
24-10-2008, 11:37
miz012

Quote:

Originally Posted by DINI

Login-password pair authentication:
If you have premium accounts of hosters like RapidShare or FileFactory or it is needed to be authenticated by the FTP server, then you can add a list of authentication parameters in the “Settings” tab.
Domain in this list is an address template that will be used to bypass authentication.
For instance: httð://*.rapidsahre.com. Authentication will be performed at all subdomains of domain rapidshare.com.
Another example: httð://rs200.rapidsahre.*. Authentication will be performed only at subdomain rs200, but regardless of the domain zone (de, ru, com.ua).
If you wish to share authentication parameters with non-administrative users, then put a flag into the “Shared” column.

Hello everybody :)

I need to help with my little problem... Can you help me how to download from rapidshare with premium account? I have made everything from help above (I have rapaired httð://*.rapidsahre.com for http://*.rapidshare.com) I have insert correct user name and pass but ADOS everytime downloads only about 17 kB file (some shortcut or something like that).

Can you help me please?

thx

Andym

PS: How it works with downloading torrents?
24-10-2008, 11:38
miz012

Rapidshare problem

Quote:

Originally Posted by DINI

Login-password pair authentication:
If you have premium accounts of hosters like RapidShare or FileFactory or it is needed to be authenticated by the FTP server, then you can add a list of authentication parameters in the “Settings” tab.
Domain in this list is an address template that will be used to bypass authentication.
For instance: httð://*.rapidsahre.com. Authentication will be performed at all subdomains of domain rapidshare.com.
Another example: httð://rs200.rapidsahre.*. Authentication will be performed only at subdomain rs200, but regardless of the domain zone (de, ru, com.ua).
If you wish to share authentication parameters with non-administrative users, then put a flag into the “Shared” column.

Hello everybody :)

I need to help with my little problem... Can you help me how to download from rapidshare with premium account? I have made everything from help above (I have rapaired httð://*.rapidsahre.com for http://*.rapidshare.com) I have insert correct user name and pass but ADOS everytime downloads only about 17 kB file (some shortcut or something like that).

Can you help me please?

thx

Andym

PS: How it works with downloading torrents?
09-11-2008, 03:25
holla

Quote:

Originally Posted by holla

how can I configure my ados to download everyday on my happy hours???

from 2-7 every day

How do I schedule?? I tried many things but none worked

no one????????
09-11-2008, 22:01
kslack

Error ECD_005 & ECD_012

Hello i have a problem with downloading. It not startet. In the log screen is error ECD_005 & ECD_012. In the lighhtp log file is nothing. In the directory cron.1min is
only ados.sh. Ados can't make sh script for downloading in this directory. I'm agonized. :(
10-11-2008, 20:18
holla

probalby u can't write on the disk... try it and tell us sth
11-11-2008, 10:16
kslack

I have write permition 777 to the directory cron.1min and to the download directory.
11-11-2008, 21:53
kslack

Error ECD_005 & ECD_012

Must please user defined in the ADOS for downloading the same as user in the asus system? I have in the asus system only one user admin. And in the ADOS program have i different user martin.
01-12-2008, 21:16
metamorphose

1 Attachment(s)

Error mesage: Can't recieve information about the download

Hi Everybody,

could anybody help me why I receive this error message above. For more details see attached file.
19-12-2008, 22:16
metamorphose

I can eliminate error message, but downloading still not work.

Should I open a special port on firewall?

I do not understand: log files of ADOS (in _log directory) are empty, I cannot find any error message.
22-12-2008, 17:11
Kenny

I'm getting this during setup: Fatal error: Class 'PDO' not found in /opt/share/www/ados/install/index.php on line 457

edit: nevermind, solved

Show 40 post(s) from this thread on one page