Printable View
yep, image files not working for unknown reason, must be zipped?
only dbm is important. check by
output looks like:Code:wl txpwr1
TxPower is 56 qdbm, 14.0 dbm, 25 mW Override is Off
and it's possible to set by units
http://www.dd-wrt.com/wiki/index.php/Wl_command#txpwr
Default Output for "wl txpwr 1":
TxPower is 127 qdbm, 31.75 dbm, 1496 mW Override is Off
What is tha maximum safe value for dbm? I don't want to damage my router :)
omfg, there is some bug in, do you have latest firmware?
max recomended by law is 20 dBm, but bundled antenna gets +-5dBm
4.150 RC10.5Code:wl ver
wl0: Apr 10 2008 11:52:33 version 4.150.10.29
"3.130 RC20.0
wl0: May 19 2005 12:44:34 version 3.130.20.0
"
No, I guess I don't have the latest firmware :D
The law is not the problem :). But if I get 20 dBm then I supposed my signal will be close to zero...and that is not good....
31 is bad for my hardware?
Shall I do a firmware upgrade? Witch one ?
it's good idea to update firmware, if u have original asus fw visit asus download page. Or u can try new alternative firmware, but it's not easy like asus.
http://code.google.com/p/wl500g/
http://wl500g.info/showthread.php?t=10307
Changing the 'wireless channel' to something else might also help. (interference with other wireless accespoints)
(should be in changeable in the webinterface)
My firmware is 1.9.7.5. Asus indicates just 1.9.7.7 to be above.
Channel change....I didn't see anything in the web interface for that. And I think it's useless because I don't have other's AP nowhere near me..
Not now, but if u 1st get the channel number one or last(13) :DQuote:
Originally Posted by Tupac