Printable View
Ok, if I telnet to the router and login as root, there is no Top. But if I login as marc, that will give me all the programs I have installed, and Top is there. But I installed KFurge's image and followed his instructions to personalize the router.Quote:
Originally Posted by Magnus
I am not sure, but I bet that Top is amongst the new Busybox commands.
Correct me if I am wrong
Marc
Yest, top is part of the upgraded optware busybox. Regarding your problem, you probably don't have /opt/bin in your $PATH when when logged in as root.Quote:
Originally Posted by mumsoft
- K.C.
Glad you hung in there. I've got another one for you... In addition to the gpio trick, my box is running at 300MHz now... It used to run at 264Mhz.Quote:
Originally Posted by F3ar0n
I want to do a little more testing before turning this trick out into the wild, but google can unlock all of the secrets if you're brave enough.
- K.C.
Hi,Quote:
Originally Posted by kfurge
Have been googling for over 2hours but didn't find anything :(
can you please post the link or pm it to mo ?
Do you know if this also works on openwrt
Grtzz
Ronnie.
Guys, running @300MHz without a heatsink on the CPU is not recommended...
Yeah, I know. That's why I'm planning on taking some thermal measurements before and after prior before posting. The how-to won't come without a recommendation.Quote:
Originally Posted by Oleg
- K.C.
Just installed the ksoftirqd fix. It makes a big difference to my system. My two mapped Samba drives no longer take forever to respond. Another headache gone thanks to kfurge and the rest of you.
Thank you!
--Brian :D
I installed the ksoftirqd fix as well, this seems also solve the ftp problem that I facing before. Before apply the fix, when ftp from Internet to the box, the ftp connection will lost at about 250 to 300MB of file transfer, and I needed to wait for at least one hour before I can login the box through ftp again.
After apply the ksoftirqd fix, I have try 3 files which both > 1GB, both can transfer successfully.
Again, thanks KC for your great effort!!!:)
Dude that worked great... Thank you so much!
You bet.Quote:
Originally Posted by Fullback
- K.C.
At the end of the rc.local file before fi.
Am I doing it right?
The exact location is not critical, but mine is within the "rc.local.done" if statement so it only runs once at startup.Quote:
Originally Posted by tiexano
- K.C.
Hi K.C. -
Just wondering, if this is still applicable to your WL700gE_kc_1078_02.nas firmware?
Is it already in there? But i dont seem to see it in the rc.local file.
I think A 15% performance gain is a lot specially if mldonky tops up to 90%.
Thanks,
Lloyd:D
It's already there. http://wl700g.homelinux.net/drupal/?q=node/138
LK
hy i have a wl500gp v1 ,oleg`s 1.9.2.7-10
it work`s perfectly. no hdd atached for the moment
but..
when i start my download from internet it goes 5.8 mb .maxim (i have a 10mb band)
The problem is when i`m downloading the ksoftirqd_CPU0 uses the cpu 100%
and if i enter the 192.168.1.1 to aces my roter..i have a big lag...sometimes even the page is not displyed corectly.
somthing i noticed ..i have to pc wired atached to my wl 500gp and if i download somthing from one pc to another(both top configurations) i have the 6mb 6.5 max transfer. and i know that this is the half speed normaly it must be 10 12 mb no? 100/8=12.5
i ve tried ""echo "interrupt=no" > /proc/miscio/power_enable_config"" i found in the "how to speed up 15 %" thread..but i ve got
[admin@gtm /proc]$ echo "interrupt=no" > /proc/miscio/power_enable_config
-sh: cannot create /proc/miscio/power_enable_config: Directory nonexistent
can someone help me to ...calm down the ksoftirqd_CPU0 ..?
Edit/Delete Message