Printable View
Tested@wirelesswan's lab
Model: WL-500g
Firmware: 1.7.5.9-2
Device WORKING (with limitations, see below)
Brandname: Dlink
Brandtype: Dlink DSB-C100
USB Interface: USB 1
URL To manufacturer: http://www.dlink.com
URL To product: http://support.dlink.com/products/vi...0Clear#drivers
The device works but shows a black and white picture instead of color. Fine for my needs.
Tested@
Model: WL-500g
Firmware: 1.7.5.6
Device NOT WORKING
Brandname: Genius
Brandtype: VideoCAM Express V4
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.geniusnet.com.tw/
http://www.geniusnet.com.tw/product/....asp?pdtno=118
QuickCam Pro USB (Dark Focus Ring), not Working :(
--------------------------------------------------------------------------------
Tested@
Model: WL-500g
Firmware: 1.8.1.9
Device NOT WORKING
Brandname: Logitech
Brandtype: QuickCam Pro USB (Dark Focus Ring)
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.logitech.com/index.cfm/do...S/EN,CRID=1795
Tested@
Model: WL-500g
Firmware: 1.8.1.9
Device NOT WORKING
Brandname: Logitech
Brandtype: QuickCam® Messenger™
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.logitech.com
URL To product: http://www.logitech.com/index.cfm/pr...CONTENTID=5041
Tested@
Model: WL-500g
Firmware: 1.8.1.9
Device NOT WORKING
Brandname: Sweex
Brandtype: 300K Pixels USB Webcam
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.sweex.com
URL To product: http://www.sweex.com/product.asp?pid=256
Tested@
Model: WL-500g v2.4
Firmware: 1.7.5.9-5 (Oleg)
Device NOT WORKING
Brandname: Philips
Brandtype: Philips ToUCam XS PCVC720K/20
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.pc-cameras.philips.com/
(Some garbage is shown.... :(
admin: define garbage please? are u viewing port 7777 ?
(see screen shot)
No not port 7777, url with with the refresh option, on port 7777 only ascii stuff
(Active X component not loaded because it's not signed, i'm running XP SP2)
(2)
Made sure all updated modules where installed, videodev.o, ov511.o, ov511_decomp.o, ov518_decomp.o.
Enabled active x component. still the same now with some colors
(3)
rcamd is using 98% cpu time....
setup
WL500G
|
USB Hub-----+---------+
| | |
WebCam USB Disk USB Stick
Root FS FTP Upload
Same thing applies for the PCVC820k/00, ToUcam II (based on OV518+ chipset). Same garbage.Quote:
Originally Posted by Zolf
Tested@
Model: WL-500g
Firmware: v9.8.2.1 BETA or v1.8.1.9
Device WORKING
Brandname: Aiptek
Brandtype: APC300 / USB OV511 video device / Sensor is an OV7610
Web Camera mode : ActiveX & refresh
Web Camera driver : OV511
Image Size : 320x240
Sens Level : High
Refresh time in second : 1
http port : 7776
ActiveX Port : 7777
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.aiptek.com/
URL To product: AFAIK no longer available
Device stays working (not sleeping)!
Tested@Model: WL-500g
Firmware: 1.9.2.7
Device WORKING
Web Camera driver : OV511
Image Size : 320x240
Tested@
Model: WL-500g
Firmware: 1.9.2.7
Device NOT WORKING
Brandname: Trust
Brandtype: SpaceCam 120
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.trust.com
URL To product: http://www.trust.com/products/product.aspx?artnr=13177
Tested@Severns House
Model: WL-500g
Firmware: Oleg 1.9.2.7-3c
Device WORKING - sort of; goes to sleep sometimes, only displays color in IE 6.0.2 using port 7776, using port 7777 is black & White if working at all, and Netscape 7.2 is b&w using either port (anyone know a work-a-round for this?)?? :confused:
Brandname: Logitech
Brandtype: QuickCam Pro 4000
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.logitech.com
The camera has been connected directly to the router and by a JAHTUSB 2.0 HUB. Both working with exceptions noted above.
Device WORKING - same color / B&W issues as the Logitech
Brandname: Prochips :cool:
Brandtype: Prochips PCC-2200K
USB Interface: USB 1.1 compliant
URL To manufacturer: http:// www.prochips.com if you can read Korean :p
This camera was a surprise...I bought it at a PC swap in 1996 for $30, and it was a decent camera to my surprise back then. Interestingly it works ok on with the Asus router. The router detects it as so:
Feb 5 12:30:24 USB webcam: attached
Feb 5 12:30:25 kernel: usb.c: registered new driver ov51x
Feb 5 12:30:25 kernel: ov51x.c: USB OV511 video device found
Feb 5 12:30:25 kernel: ov51x.c: model: Generic Camera (no ID)
Feb 5 12:30:26 kernel: ov51x.c: Sensor is an OV7610
Feb 5 12:30:26 kernel: ov51x.c: Device at usb-00:04.0-1 registered to minor 0
Feb 5 12:30:26 kernel: ov51x.c: v1.65-1.10-mark : ov51x USB Camera Driver
Feb 5 12:30:26 kernel: ov511_decomp.c: v1.6 : OV511 Decompression Module
Feb 5 12:30:26 kernel: ov518_decomp.c: v1.3 : OV518 Decompression Module
The camera has been connected directly to the router and by a JAHT USB 2.0 HUB. Both working.
Model: WL-500b
Firmware: 1.8.2.4
Device NOT WORKING
Brandname: Genius
Brandtype: Genius VideoCam SlimClip
Tested@
Model: WL-500g Deluxe
Firmware: 1.9.2.7-4
Device NOT WORKING
Brandname: Mustek
Brandtype: Wcam 300 A
USB Interface: USB 1.1 compliant
URL To manufacturer: http://www.mustek.com
URL To product: http://www.mustek.com.tw/html/prod_camra/WCam300a.htm
Tested@
Model: WL-500g
Firmware: 1.9.2.7
Device NOT WORKING
Brandname: Creative
Brandtype: Creative Webcam nx ultra
USB Interface: USB 1.1 compliant
See this page:Quote:
Originally Posted by bramfm
http://alpha.dyndns.org/ov511/faq.html
"
Q: I tried using my OV518/OV518+ camera, but I only get colorful garbage in the top 1/8 of the window.
A: Make sure you aren't using the "dumppix=1" parameter (that is only needed for the "d518" program)."