I am quite positive, but I'll check again when I get home tonight.Quote:
Originally Posted by Oleg
Printable View
I am quite positive, but I'll check again when I get home tonight.Quote:
Originally Posted by Oleg
:) Hello Oleg, just for information :
I sent you my problem with your previous firmware 1.7.5.6-5: the DNS server was running only if the DHCP was on.
With your last release: 1.7.5.9-1 my DHCP is off and the DNS server works fine!
So it was only with the 1.7.5.6-5 that I had this problem.
Webcams do not working in CR1. Both are using PWC 8.8. Working alright in official(?) firmware 1.7.5.9.
Error message "cannot connect to server". Rebooting did not help.
Name of the webcams:
Logitech QuickCam Pro 3000
Afina
Thanks.
Sorry,I've no webcam, so can't check on this problem. Does this cam work with 1.7.5.6-5?Quote:
Originally Posted by geoffreytw
Hi Oleg,
maybe itīs possible to make it possible to change the webinterfaces tcp port. at
the moment there is no way. httpd allways starts on port 80. there seems to be no -p switch.
kind regards
patrick
This requires recompiling httpd and there is no sources available for 1.7.5.9.
But you still can alter the ports using iptables, just like this is done for external web access.
OK, checked the settings. Everythings seems to be right where it should. :(Quote:
Originally Posted by Alpaca
hi oleg,
when i alter the port with iptable, i canīt use port 80 for a second webserver....
or is it possible to use busybox_httpd for webinterface?
hi,
after updating to xx.9 cr1 i can't use my webcam and also not the ftp server. somebody the same problems?
greetz
busybox_httpd can't be used for web iface. it's completely different program. You don't need to setup second web server (busybox_httpd) on the 80 port. You can start it on osmething like 88 and then, using iptables route all trafic coming to port 80 to port 88. For iptables see www.netfilter.org site.
can i realy start my webinterface on 80 my busybox on 88 route all from 80 to 88 and all from 88 to 80?
1.7.5.6 CR5 works, but 1.7.5.9 CR1 still does not work. official(?) 1.7.5.9 works also.Quote:
Originally Posted by Oleg
Quote:
Originally Posted by geoffreytw
same here, someone ideas why?
Seems I've found the reason. For the same reason ftp server also broken... Wait for CR2...
Shouldn't we donate you a webcam? :)Quote:
Originally Posted by Oleg