Ìîäåì ZTE MF100/MF112/MF180/MF190/MF192 è ðîóòåð Asus

Quote:

---

Originally Posted by a005

Çàâåëîñü "âðó÷íóþ" ïîñëå ñëåäóþùèõ äåéñòâèé:

[CODE]
rmmod option
rmmod usbserial
insmod usbserial vendor=0x19d2 product=0x1217
insmod option

---

Õîðîøî. Çíà÷èò íà âåðíîì ïóòè.


Òåïåðü âïèñûâàåì â "Device initial script" ñëåäóþùóþ ñòðîêó:

Code:

---

usb_modeswitch -v $VID -p $PID -V 0x0x19d2 -P 0x1217 -M 5553424308EB1D8400000000000010FF000000000000000000000000000000 && sleep 1 && insmod usbserial vendor=0x19d2 product=0x1217

---

Ñîõðàíÿåì è ïåðåçàãðóæàåì.


Òàêæå ïðîñüáà ïðîâåðèòü usb_modeswitch -c 19d2_1216.txt. (åñòåñòâåííî äî âïèñûâàíèÿ â Device initial script). Åñëè âñ¸ â ïîðÿäêå, ìîãó äîáàâèòü â ïðîøèâêó.


Âïðî÷åì, åñòü åùå îäèí ñïîñîá, ïðè êîòîðîì íå íàäî áóäåò âïèñûâàòü ñòðîêó èíèöèàëèçàöèè. Åñëè ïåðåñáîðêà ïðîøèâêè òðóäíîñòåé íå âûçûâàåò, ïðîñüáà ïðîâåðèòü ñëåäóþùåå:
 äðàéâåð linux/drivers/usb/serial/option.ñ âïèñàòü ñòðîêó ñâîåãî ìîäåìà.

Code:

---

        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1217, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },

---

Çàîäíî ìîæíî è 19d2_1216.txt ïîëîæèòü â gateway/usb_modeswitch/data/usb_modeswitch.d/19d2:1216

Äàëåå â gateway make && make install

Quote:

---

Originally Posted by rss

Õîðîøî. Çíà÷èò íà âåðíîì ïóòè.

---

Ñïàñèáî çà ïîääåðæêó!

Quote:

---

Originally Posted by rss

Òåïåðü âïèñûâàåì â "Device initial script" ñëåäóþùóþ ñòðîêó:

Code:

---

usb_modeswitch -v $VID -p $PID -V 0x0x19d2 -P 0x1217 -M 5553424308EB1D8400000000000010FF000000000000000000000000000000 && sleep 1 && insmod usbserial vendor=0x19d2 product=0x1217

---

---

Âîò îí êëþ÷ ê ðàçãàäêå! Ýòî âèäèìî, àíàëîã òîãî, ÷òî â udev (â 2.6) â /lib/udev/rules ïèøåòñÿ?

Quote:

---

Originally Posted by rss

Òàêæå ïðîñüáà ïðîâåðèòü usb_modeswitch -c 19d2_1216.txt. (åñòåñòâåííî äî âïèñûâàíèÿ â Device initial script). Åñëè âñ¸ â ïîðÿäêå, ìîãó äîáàâèòü â ïðîøèâêó.
Çàîäíî ìîæíî è 19d2_1216.txt ïîëîæèòü â gateway/usb_modeswitch/data/usb_modeswitch.d/19d2:1216

---

Ýòî ÿ óæå ïðîäåëàë (çàáåãàÿ âïåðåä) íà òåêóùåé ïðîøèâêå. Êàê ÿ óæå ïèñàë, ïåðåêëþ÷åíèå ïðîèñõîäèò, à âîò ïðàâèëüíûå insmod'û - íå ïðîõîäÿò (íó ïðàâèëüíî, ÿ è íå çíàë, ÷òî èõ íàäî äëÿ íåçíàêîìûõ ñèñòåìå ìîäåìîâ âðó÷íóþ ïðîïèñûâàòü).

Quote:

---

Originally Posted by rss

Âïðî÷åì, åñòü åùå îäèí ñïîñîá, ïðè êîòîðîì íå íàäî áóäåò âïèñûâàòü ñòðîêó èíèöèàëèçàöèè. Åñëè ïåðåñáîðêà ïðîøèâêè òðóäíîñòåé íå âûçûâàåò, ïðîñüáà ïðîâåðèòü ñëåäóþùåå:
 äðàéâåð linux/drivers/usb/serial/option.ñ âïèñàòü ñòðîêó ñâîåãî ìîäåìà.

Code:

---

        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1217, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },

---

---

Ïîïðîáóþ äàííóþ ìîäèôèêàöèþ. Î ðåçóëüòàòàõ îòïèøó!

Âûçûâàåò îçàáî÷åííîñòü, ïî÷åìó èäåíòèôèêàòîðû ìîäåìîâ íåîáõîäèìî æåñòêî â êîä ïðîïèñûâàòü? Ýòî îñîáåííîñòü ðåàëèçàöèè ïðîøèâêè, ÿäðà 2.4 èëè êàê?
Îïÿòü æå íà óáóíòå âñå ðàáîòàëî òîëüêî íàñòðîéêîé usb_modeswitch.

Quote:

---

Originally Posted by a005

Âûçûâàåò îçàáî÷åííîñòü, ïî÷åìó èäåíòèôèêàòîðû ìîäåìîâ íåîáõîäèìî æåñòêî â êîä ïðîïèñûâàòü? Ýòî îñîáåííîñòü ðåàëèçàöèè ïðîøèâêè, ÿäðà 2.4 èëè êàê?
Îïÿòü æå íà óáóíòå âñå ðàáîòàëî òîëüêî íàñòðîéêîé usb_modeswitch.

---

Îïðåäåëèòü, ÷òî èìååì äåëî ñ ìîäåìîì ìîæíî áåç ïðîáëåì. À âîò äàëüøå äîëæåí áûòü ïîäêëþ÷åí êàêîé-òî äðàéâåð, êîòîðûé ñîîòâåòñòâóåò ýòîìó óñòðîéñòâó. Ëèáî â óáóíòå â ôîíå ïðîãðàììà ïîäêëþ÷åíèÿ ñàìà ïðèñîåäèíÿåò usbserial, ëèáî èäåíòèôèêàòîð óñòðîéñòâà âñ¸ òàêè ãäå-òî ïðîïèñàí. Ñàìûé ïðîñòîé ñïîñîá ïîñìîòðåòü, êàêîé äðàéâåð ïîäêëþ÷åí - usbfs.

Ê ñîæàëåíèþ, íè îäèí èç äàëüíåéøèõ ñîâåòîâ (â òîì ÷èñëå è ïåðåñáîðêà ñ ìîäèôèöèðîâàííûì option.c) ïðîäâèíóòüñÿ äàëüøå íå ïîìîã:
Ìîäåì ïåðåêëþ÷àåòñÿ -> äðàéâåðà íå çàãðóæàþòñÿ.

Ðàáîòàåò, òîëüêî åñëè âðó÷íóþ âûãðóçèòü ìîäóëè ìîäåìà è ïîòîì îïÿòü çàãðóçèòü.
Òàê æå, íå ïîéìó, ïî÷åìó ôàéë wan0_pppd íå ñîäåðæèò óïîìèíàíèé î /dev/usb/tts/0. Ïðàâèëüíî ëè ÿ ïîíèìàþ, ÷òî ýòîò ôàéë ãåíåðèòñÿ ñêðèïòîì
"/usr/ppp/dial wan0_"?
Âîò ÷òî â ôàéëå wan0_pppd ïîñëå çàïóñêà ýòîãî ñêðèïòà (ïîñëå çàãðóçêè âðó÷íóþ ìîäóëåé ìîäåìà):

Code:

---

debug

921600
crtscts
noipdefault
ipcp-accept-local
lcp-echo-interval 60
lcp-echo-failure 6
mtu 1492
mru 1492
usepeerdns
noauth
holdoff 5
maxfail 0
nodetach
persist
unit 0
novj nobsdcomp novjccomp nopcomp noaccomp
user 'mts'
password 'mts'
connect "/tmp/ppp/peers/wan0_chat.sh"

---

Ê ñîæàëåíèþ, ñîâñåì íå îðèåíòèðóþñü â àðõèòåêòóðå ïðîøèâêè, ÷òîáû öåëåíàïðàâëåííî äâèãàòüñÿ äàëüøå...

Quote:

---

Originally Posted by a005

Ê ñîæàëåíèþ, íè îäèí èç äàëüíåéøèõ ñîâåòîâ (â òîì ÷èñëå è ïåðåñáîðêà ñ ìîäèôèöèðîâàííûì option.c) ïðîäâèíóòüñÿ äàëüøå íå ïîìîã:
Ìîäåì ïåðåêëþ÷àåòñÿ -> äðàéâåðà íå çàãðóæàþòñÿ.

Ðàáîòàåò, òîëüêî åñëè âðó÷íóþ âûãðóçèòü ìîäóëè ìîäåìà è ïîòîì îïÿòü çàãðóçèòü.
Òàê æå, íå ïîéìó, ïî÷åìó ôàéë wan0_pppd íå ñîäåðæèò óïîìèíàíèé î /dev/usb/tts/0. Ïðàâèëüíî ëè ÿ ïîíèìàþ, ÷òî ýòîò ôàéë ãåíåðèòñÿ ñêðèïòîì
"/usr/ppp/dial wan0_"?
Âîò ÷òî â ôàéëå wan0_pppd ïîñëå çàïóñêà ýòîãî ñêðèïòà (ïîñëå çàãðóçêè âðó÷íóþ ìîäóëåé ìîäåìà):

Code:

---

debug

921600
crtscts
noipdefault
ipcp-accept-local
lcp-echo-interval 60
lcp-echo-failure 6
mtu 1492
mru 1492
usepeerdns
noauth
holdoff 5
maxfail 0
nodetach
persist
unit 0
novj nobsdcomp novjccomp nopcomp noaccomp
user 'mts'
password 'mts'
connect "/tmp/ppp/peers/wan0_chat.sh"

---

Ê ñîæàëåíèþ, ñîâñåì íå îðèåíòèðóþñü â àðõèòåêòóðå ïðîøèâêè, ÷òîáû öåëåíàïðàâëåííî äâèãàòüñÿ äàëüøå...

---

Ñêðèïò äîçâîíà çàïóñêàåòñÿ ïîñëå òîãî, êàê ìîäåì îïðåäåë¸í è çàãðóæåíû äðàéâåðû. Åñëè ñåé÷àñ èñïîëüçîâàòü "Device initial script", ïîäêëþ÷åíèå ïðîèñõîäèò?

×àñòü ñ usb_modeswitch ìîæíî âûáðîñèòü, åñëè êîíôèãóðàöèÿ óæå âñòàâëåíà â ïðîøèâêó.

Quote:

---

Originally Posted by rss

Ñêðèïò äîçâîíà çàïóñêàåòñÿ ïîñëå òîãî, êàê ìîäåì îïðåäåë¸í è çàãðóæåíû äðàéâåðû. Åñëè ñåé÷àñ èñïîëüçîâàòü "Device initial script", ïîäêëþ÷åíèå ïðîèñõîäèò?

---

Íåò íå ïðîèñõîäèò. À êîãäà âîîáùå âûçûâàåòñÿ Device initial script? Ó ìåíÿ ñîçäàåòñÿ âïå÷àòëåíèå, ÷òî îí ëèáî íå âûçûâàåòñÿ, ëèáî âûçûâàåòñÿ "íå âîâðåìÿ".
Ñåé÷àñ, ÷òîáû çàïóñòèòü ñîåäèíåíèå, ÿ âûïîëíÿþ ñëåäóþùåå äåéñòâèå (åãî æå âñòàâèë, Device initial script, íî òàì íå ïîìîãàåò):

Code:

---

rmmod option && rmmod usbserial && insmod usbserial vendor=0x19d2 product=0x1217

---

Ïîñëå ÷åãî â ëîãàõ èäóò ñëåäóþùèå çàïèñè:

Code:

---

Jan  1 03:03:43 root: wan0_pppd exit code: 2
Jan  1 03:03:45 pppd[667]: no device specified and stdin is not a tty

---

Ïîýòîìó, ïðèõîäèòñÿ ðåäàêòèðîâàòü ôàéë /tmp/ppp/peers/wan0_pppd, â êîòîðûé ÿ âñòàâëÿþ ñòðîêó "/dev/usb/tts/0".
Ïîñëå ÷åãî, åñëè íàæàòü íà âåáìîðäå "Connect", òî âñå ðàáîòàåò.

Ðó÷íîé çàïóñê ñêðèïòà "/usr/ppp/dial wan0_" ïåðåòèðàåò ôàéë /tmp/ppp/peers/wan0_pppd, óáèðàÿ èç íåãî óïîìèíàíèå î $usbdev

Quote:

---

Originally Posted by a005

Íåò íå ïðîèñõîäèò. À êîãäà âîîáùå âûçûâàåòñÿ Device initial script? Ó ìåíÿ ñîçäàåòñÿ âïå÷àòëåíèå, ÷òî îí ëèáî íå âûçûâàåòñÿ, ëèáî âûçûâàåòñÿ "íå âîâðåìÿ".

---

Ñêðèïòû èç Device initial script âûçûâàþòñÿ ñðàçó ïîñëå usb_modeswitch.

Êàê òîëüêî îáíàðóæèâàåòñÿ ìîäåì, äëÿ íåãî ïîäãðóæàþòñÿ äðàéâåðû. Ìîæíî ïîïðîáîâàòü âïèñàòü â gateway/rc/usbmodem.c

Code:

---

        if( ret && found_dev ){
                nvram_set(strcat_r(prefix, "usb_device_name", tmp), found_dev->prod );
                eval("insmod", "usbserial vendor=0x19d2 product=0x1217");
                eval("insmod", "option");
#ifndef LINUX26
                eval("insmod", "acm");
#else
                eval("insmod", "cdc-acm");
#endif
        }

---

Device initial script, åñòåñòâåííî, ïåðåä ýòèì î÷èñòèòü.


 ëþáîì ñëó÷àå ìîæíî îòêëþ÷èòü çàïóñê ñêðèïòà äîçâîíà, óñòàíîâèâ òèï ìîäåìà â User, ïîñëå ÷åãî ñäåëàòü ñâîþ êîïèþ ñ òåì ïîðÿäêîì çàïóñêà, êîòîðûé íóæåí.

Quote:

---

Originally Posted by rss

Ñêðèïòû èç Device initial script âûçûâàþòñÿ ñðàçó ïîñëå usb_modeswitch.

---

Åñëè ñìîòðåòü ïðàâäå â ãëàçà, òî ñïåðâà hotplug_usb_modeswitch() âûçûâàåòñÿ äëÿ êàæäîãî ýêçåìïëÿðà ïðîñòîãî USB óñòðîéñòâà:

1. CD-ROM
2. Storage

è åñëè â Device initial script ïðîïèñàí åùå îäèí âûçîâ usb_modeswitch, òî ïî ôàêòó, èìååì ÷åòûðå âûçîâà ïîñëåäíåãî.

Ïðè÷åì, áóäü òî 2 èëè 4 âûçîâà - îíè ãåíåðèðóþòñÿ ïðàêòè÷åñêè îäíîâðåìåííî. Ñàìûé ïåðâûé åùå íå óñïåë îòðàáîòàòü (usb_modeswitch - èíåðòåí), ñëåäîì ïîðîæäàåòñÿ åùå îäèí âûçîâ äëÿ òîãî-æå vid : pid.

Ñàìîå èíòåðåñíîå ïîÿâëÿåòñÿ äàëüøå. Íåèçâåñòíî ïîñëå êàêîãî ýêçåìïëÿðà usb_modeswitch ïðîñòîå óñòðîéñòâî ïåðåêëþ÷èòüñÿ â ñîñòàâíîå, íî êîãäà îíî ïåðåêëþ÷èòñÿ - ïîñëåäóåò åùå íåñêîëüêî âûçîâîâ hotplug_usb_modeswitch()

1. íîâîå ñîñòàâíîå óñòðîéñòâî ñ íîâûìè vid : pid
2. cdrom
3. storage

, êîòîðûå, â ñâîþ î÷åðåäü, íå ðàç îáðàòÿòñÿ ê usb_modeswitch. Ñàì usb_modeswitch óæå ñìîæåò ïðîèãíîðèðîâàòü ýòè íîâûå óñòðîéñòâà, õîòÿ, íåèçâåñòíî êàêàÿ áóäåò ðåàêöèÿ íà òðè îäíîâðåìåííûõ ýêçåìïëÿðà ïîñëåäíåãî.

Ìîæåò ÿ îøèáñÿ? Ðàíåå âûêëàäûâàåìûå ëîãè ãîâîðÿò îá îáðàòíîì (òàê-æå åñòü â ïðåäûäóùèõ ìîèõ ñîîáùåíèÿõ).

Quote:

---

Originally Posted by ConstAntz

Åñëè ñìîòðåòü ïðàâäå â ãëàçà, òî ñïåðâà hotplug_usb_modeswitch() âûçûâàåòñÿ äëÿ êàæäîãî ýêçåìïëÿðà ïðîñòîãî USB óñòðîéñòâà:

1. CD-ROM
2. Storage

è åñëè â Device initial script ïðîïèñàí åùå îäèí âûçîâ usb_modeswitch, òî ïî ôàêòó, èìååì ÷åòûðå âûçîâà ïîñëåäíåãî.

---

Åñëè â usb_modeswitch.d îòñóòñòâóåò ïðàâèëî äëÿ ïîäêëþ÷àåìîãî ìîäåìà, òî âñ¸ áóäåò íîðìàëüíî. Âñ¸ ïåðåêëþ÷èòñÿ â Device initial script.

Îòíîñèòåëüíî ìíîãîêðàòíîãî çàïóñêà.  ïðèíöèïå ìîæíî èñêëþ÷èòü, íî âðîäå áû ðàáîòå íå ìåøàåò.

usb_modeswitch èùåò óêàçàííîå óñòðîéñòâî. Åñëè óñòðîéñòâî óæå ïåðåêëþ÷èëîñü, çíà÷èò íå íàéäåò è çàâåðøèò ðàáîòó.

Ó ìåíÿ áûëà ïðîáëåìà ïåðåä âûçîâîì çàãðóçêè äðàéâåðîâ ñòàâèë ïàóçó â 5 ñåê òîãäà âñå áûëî ÎÊ. http://wl500g.info/showpost.php?p=223711&postcount=1027

p.s.

ìîæåò åå â íîâûõ ïðîøèâêàõ ñòîèò âñòàâèòü
http://code.google.com/p/wl500g/sour...s/usr/ppp/dial

Code:

---

....
238 init_global
sleep 5
239 load_drivers
240 get_usb_structure
...

---

Ñïàñèáî. Ïîïðîáóþ âå÷åðîì ïîñòàâèòü ïàóçó 5 ñåê.

Ó ìåíÿ âñòðå÷íûé âîïðîñ:
Äðàéâåðà ãðóçÿòñÿ ÷åðåç ñêðèïò /usr/ppp/dial èëè ÷åðåç usbmodem.c ? Åñòü åùå /usr/ppp/uni/dial - òàì åùå îäíà âåðñèÿ çàãðóçêè ìîäåìà?
Âòîðîé âîïðîñ, ïî÷åìó ïðè çàãðóçêå usbserial íå èñïîëüçóåòñÿ ìåòîä èç uni/dial:

Code:

---

insmod usbserial vendor=$(nvram get wan_modem_vid) product=$(nvram get wan_modem_pid) $maxpacket

---

?

Quote:

---

Originally Posted by a005

Ñïàñèáî. Ïîïðîáóþ âå÷åðîì ïîñòàâèòü ïàóçó 5 ñåê.

Ó ìåíÿ âñòðå÷íûé âîïðîñ:
Äðàéâåðà ãðóçÿòñÿ ÷åðåç ñêðèïò /usr/ppp/dial èëè ÷åðåç usbmodem.c ?

Åñòü åùå /usr/ppp/uni/dial - òàì åùå îäíà âåðñèÿ çàãðóçêè ìîäåìà?
Âòîðîé âîïðîñ, ïî÷åìó ïðè çàãðóçêå usbserial íå èñïîëüçóåòñÿ ìåòîä èç uni/dial:

Code:

---

insmod usbserial vendor=$(nvram get wan_modem_vid) product=$(nvram get wan_modem_pid) $maxpacket

---

?

---

Ó ìåíÿ åùå ñòàðàÿ ïðîøèâêà ñòîèò, íîâóþ íå ïðîáîâàë. Çàäà÷à áûëà èìåòü ðåçåðâûé êàíàë ÷åðåç ìîäåì è ïåðåêëþ÷àòüñÿ íà íåãî ïî íåîáõîäèìîñòè êíîïêîé. http://wl500g.info/showpost.php?p=220531&postcount=17
 êîíöå åñòü ñêðèïò êîòîðûé ÿ èñïîëüçîâàë.
òàì êàê ðàç ïðîèñõîäèò çàãðóçêà äðàéâåðà ÷åðåç

Code:

---

insmod usbserial vendor=$(nvram get wan_modem_vid) product=$(nvram get wan_modem_pid) $maxpacket

---

áåç option

Ñåé÷àñ ÿ íàñêîëüêî ïîíèìàþ óâàæàåìûå rss è dlukanidin ÷òî-òî ïîäïðàâèëè â option è â ïðîøèâêå. Òóò ÿ ïîäñêàçàòü òî÷íî íå ìîãó êàê ãðóçèòñÿ usbserial è êàê åìó ïåðåäàþòñÿ VID è PID.

/usr/ppp/uni/dial - â íîâûõ ïðîøèâêàõ íà èñõîäíèêàõ óæå ïðîïàë (íå âèæó åãî)

Ðàíüøå åñëè ÿ ãðóçèë
insmod usbserial
insmod option

ó ìåíÿ áûëè ïðîáëåìû äðàéâåð serial ïîäõâàòûâàëñÿ, íî ñîåäèíåíèÿ íå áûëî.

Quote:

---

Originally Posted by a005

Ñïàñèáî. Ïîïðîáóþ âå÷åðîì ïîñòàâèòü ïàóçó 5 ñåê.

Ó ìåíÿ âñòðå÷íûé âîïðîñ:
Äðàéâåðà ãðóçÿòñÿ ÷åðåç ñêðèïò /usr/ppp/dial èëè ÷åðåç usbmodem.c ?

---

Èç usbmodem.c

Quote:

---

Originally Posted by a005

Åñòü åùå /usr/ppp/uni/dial - òàì åùå îäíà âåðñèÿ çàãðóçêè ìîäåìà?
Âòîðîé âîïðîñ, ïî÷åìó ïðè çàãðóçêå usbserial íå èñïîëüçóåòñÿ ìåòîä èç uni/dial:

Code:

---

insmod usbserial vendor=$(nvram get wan_modem_vid) product=$(nvram get wan_modem_pid) $maxpacket

---

?

---

Íå èñïîëüçóåòñÿ, ïîñêîëüêó ôîðìó usbserial vendor=... product=... íåëüçÿ èñïîëüçîâàòü â ñëó÷àå íåñêîëüêèõ ìîäåìîâ.

Quote:

---

Originally Posted by rss

Ìîæíî ïîïðîáîâàòü âïèñàòü â gateway/rc/usbmodem.c

---

Íèêàêèõ èçìåíåíèé íå ïðîèçîøëî...

Code:

---

#cat /proc/tty/driver/usb-serial
usbserinfo:1.0a driver:v1.4

---

ïîñëå rmmod && insmod

Code:

---

#cat /proc/tty/driver/usb-serial
usbserinfo:1.0a driver:v1.4
0: module:usbserial name:"Generic" vendor:19d2 product:1217 num_ports:1 port:1 path:usb-01:03.2-1

---

Quote:

---

Originally Posted by rss

 ëþáîì ñëó÷àå ìîæíî îòêëþ÷èòü çàïóñê ñêðèïòà äîçâîíà, óñòàíîâèâ òèï ìîäåìà â User, ïîñëå ÷åãî ñäåëàòü ñâîþ êîïèþ ñ òåì ïîðÿäêîì çàïóñêà, êîòîðûé íóæåí.

---

À âîò ýòî óæå ãðóñòíî, ò.ê. íåïîíÿòíî, ïî÷åìó æå ñòàíäàðòíûé ñïîñîá íå ðàáîòàåò?

Ìîæåò íàäî ñîáðàòü ïðîøèâêó ñ îòëàäî÷íûì ðåæèìîì?

Quote:

---

Originally Posted by a005

Íèêàêèõ èçìåíåíèé íå ïðîèçîøëî...

Code:

---

#cat /proc/tty/driver/usb-serial
usbserinfo:1.0a driver:v1.4

---

ïîñëå rmmod && insmod

Code:

---

#cat /proc/tty/driver/usb-serial
usbserinfo:1.0a driver:v1.4
0: module:usbserial name:"Generic" vendor:19d2 product:1217 num_ports:1 port:1 path:usb-01:03.2-1

---

À âîò ýòî óæå ãðóñòíî, ò.ê. íåïîíÿòíî, ïî÷åìó æå ñòàíäàðòíûé ñïîñîá íå ðàáîòàåò?

Ìîæåò íàäî ñîáðàòü ïðîøèâêó ñ îòëàäî÷íûì ðåæèìîì?

---

Ïîïðîáóþ ïîäêëþ÷èòüñÿ ê îáñóæäåíèþ.
1. Ïðè ïîäêëþ÷åíèè íîâîãî ìîäåìà ïðîáëåìû ñîáñòâåííî 2-å. Ïðàâèëüíî ïåðåêëþ÷èòü è çàãðóçèòü äðàéâåðà.
2. Íàñêîëüêî ÿ ïîíÿë ñ ïåðåêëþ÷åíèåì ðàçîáðàëèñü. Åãî ìîæíî äåëàòü êîíå÷íî ÷åðåç device initial script, íî êàê óæå ïèñàë ðàíüøå ÿ î÷åíü âíèìàòåëüíî ñìîòðåë íà êîä ýòîãî âûçîâà è íå óâèäåë ðàçíèöû ñî øòàòíûì ìåõàíèçìîì ÷åðåç ïîäñòàíîâêó ïàðàìåòðîâ ïåðåêëþ÷åíèÿ â ôàéëå ïîëüçîâàòåëÿ â ïóíêòå ìîðäû zero cd. Ê ñîæàëåíèþ ïîêà íå ïîëó÷ó ìîäåì äëÿ êîòîðîãî ýòè ìåòîäû áóäóò âåñòè ñåáÿ ïî ðàçíîìó ïðîâåðèòü ñàì ïðè÷èíû íå ñìîãó.
3. Òåïåðü çàãðóçêà äðàéâåðîâ. Ñåé÷àñ ãðóçÿòñÿ usbserial áåç ïàðàìåòðîâ êîòîðûé ðàáîòàåò â òàêîì ñëó÷àå òîëüêî êàê äðàéàåð íèæíåãî óðîâíÿ è option, â êîòîðîì ñîáñòâåííî è ïðîïèñàíû âñå ìîäåìû. Åñëè íîâîãî ìîäåìà òàì íåò, òî ïîðòû åñòåñòâåííî íå ïîäíèìóòñÿ. Åñëè åñòü, òî äîëæíû ïîäíÿòñÿ ïî ëþáîìó, êðîìå ñëó÷àåâ îøèáêè ïðè èíèöèàëèçàöèè.

Òåïåðü ìîè ðåêîìåíäàöèè êàê ïîíÿòü ãäå ïðîèñõîäèò ñáîé.
1. ñîáðàòü ïðîøèâêó ñ ìîäèôèöèðîâàííûì option ïî ðåêîìåíäàöèè rss (åù¸ ðàç âíèìàòåëüíî ïîñìîòðåòü, ÷òî ìîäåì ïðîïèñàí ïðàâèëüíî).
2. çàãðóçèòü ðîóòåð áåç ìîäåìà.
3. âîòêíóòü ìîäåì è ñìîòðåòü ñèñëîã. óáåäèòñÿ, ÷òî ñîîáùåíèé îò option íåò, åñëè åñòü, òî ïîêàçàòü çäåñü êàêèå. Óáåäèòüñÿ, ÷òî option çàãðóæåí.
4. âûãðóçèòü option, usbserial è çàãðóçèòü usbserial ñ ïàðàìåòðàìè.
5. ïîñìîòðåòü ñèñëîã è óáåäèòñÿ, ÷òî ïîðòû ïîäíÿëèñü èëè íåò.

Åñëè äåéñòâèòåëüíî íà option ïîðòû íå ïîäíèìàþòÿ, à íà usbserial ñ ïàðàìåòðàìè ïîäíèìàþòÿ, òî íàéòè (èçâèíèòå âûëîæèòü ñåé÷àñ íå ìîãó) ìîé äðàéâåð çàìåíÿþùèé option (ïðîñòåéøèé wrapper äëÿ usabserial) â òåìå ïî ñêðèïòó èëè ïðîñòî ïî ìîèì ñîîáùåíèÿì (ôàéë modem.c åñëè íå îøèáàþñü), ïîïðàâèòü òàì èçìåíåíèÿ àíàëîãè÷íûå òåì êîòîðûå äåëàëèñü â option, è ñîáðàòü ïðîøèâêó ñ íèì âìåñòî option. Ïðîâåðèòü ïîäíèìàþòÿ ëè ïîðòû. Åñëè ïîäíèìóòñÿ òîëüêî â òàêîì âàðèàíòå, òî áóäåì äóìàòü êàê âêëþ÷àòü ýòî â ïðîøèâêó, õîòÿ è íå õîòåëîñü áû.

Èçâèíèòå çà íåêîòîðûé ñóìáóð è îòñóòñòâèå ïðÿìûõ ññûëîê, ïðîñòî íåò âîçìîæíîñòè.
Òàêæå ïðîñüáà ïðîäåëàòü ïðåäëîæåííûå ìíîé äåéñòâèÿ â ïðåäëîæåííîì ïîðÿäêå, íåñìîòðÿ íà òî, ÷òî ðàíüøå ýòî óæå äåëàëîñü íî ìîæåò áûòü â äðóãîì ïîðÿäêå, ïðîñòî, ÷òîáû ðåçóëüòàòû áûëè âîñïðîèçâîäèìûìè.

P.S. Âîò íå çðÿ ìíå íå íðàâèòñÿ ïðäóêöèÿ ZTE, õîòÿ â ïîñëåäíåå âðåìÿ è Huawei ñòàëè òàê ÷óäèòü, (ñì. òåìó ïî CDMA ìîäåìàì íà Óêðàèíñêîì Ïèïëíåòå), ÷òî â ïîðó óæå íîâûõ ïðîèçâîäèòåëåé èñêàòü, ñîâñåì ñûðûå èçäåëèÿ ïëîõî ñîâìåñòèìûå ñ ðîóòåðàìè äà è ñ ëèí¸ì â öåëîì.