Printable View
i havent set the config to 160x120 without a reason, the jpeg compression needs quite a lot of power. Maybe a 500gx is capable to serve better framerates, but in 500g you have to live with 1 to 8fps, sorry.Quote:
Originally Posted by soepkip
Does the cameye movement work for you with the 9er driver ??
After all, this is stil a router, no video workstation ;).
Greets
1 fps wouldn't be a problem, as long as it is 640x480, but just 1 frame and then nothing is not good enough :)
btw, i remenber that you could symply overclock the linksys 54G, did't it have the same hardware as the wl-500g ?... i could clock it to 500gx specs :)
you really think the segmentation fault is because the mips cpu can't handle it ?
don't try to overclock your wl500gQuote:
Originally Posted by soepkip
we (Oleg and I) have already tried it with no success, the device will end up in a rebooting loop or at your option maybe in unusable device
HiQuote:
Originally Posted by soepkip
Sorry, i haven´t seen your followup.
The Segfault should have nothing to do with the cpu power, i used the 8er driver with palantir and other stuff at the same time, with 100% load and nothing happened.
You should contact the publisher of the 9er driver here in the forum, i can just say the 9er worked for me, but i cant remember if i had tested it with 640x480 resolution. For my opinion, you should be happy with 320x240 or 322x288 and enjoy your pan-tilt device :).
Or someone is so friendly and trys to get the new opensource drivers into the firmware ...
Greets
Pan/ tilt only works whith the pwc that came whith Oleg's firmware,
whith pwc9.0.2 it doesn't work
whith pwc8 it doesn't work.
strange thing is that whith pwc9.0.2 and pwcx 9.0 loaded i can pan/tilt manually via setpwc