Firmware v1.9.2.7 CR8

Printable View

Show 40 post(s) from this thread on one page

16-11-2007, 13:53
sebw

ipkg or opt-ipkg

Quote:

Originally Posted by sebw

What are the differences between the 2 feeds?

Can anyone answer this, or is it a secret?:)
16-11-2007, 14:34
al37919

The question is incorerct.
There are two feeds in the repository:
unslung/wl500g (old)
optware/oleg (new)
The short answer is: use a new one and uclibc-opt and ipkg-opt are required packages for it.

Afterwards, you will anyway use 'ipkg' command to manage your packages.
16-11-2007, 23:20
ImoTh3P

Quote:

Originally Posted by l0c4lh0st

Will this work on my WL-500g ("normal", not Deluxe version)?

I have the official Asus 1.9.5.0 firmware installed atm.

And is there a web configuration page still? Or do I need to do everything via the console?

Thanks in advance for the replies!

Yes, this firmware works perfectly on a "simple" WL500g (use this one).
The ASUS web interface configuration is still available, a bit improved with news features included in Oleg's firmware.

Do not hesitate, just flash ;)
21-11-2007, 03:16
sergeos

oops, sorry, please disregard
21-11-2007, 20:49
zheka_ppp

Upgraded from 1.9.2.7-7g to 1.9.2.7-8

Cannot run mpd now:
User defined signal 1
immediatly when trying to start

Anyone succeded ?

Upd:
lighttpd - same error
Think it was my mistake. I didn't save flashfs in webui before upgrade and, of course, cannot restore it after upgrade.
Probably missing some files....
22-11-2007, 22:41
rogerrb

Quote:

Originally Posted by rogerrb

I have the same problem after upgrading my WL500g Deluxe. After 11 hours the wireless network became unstable. The wired connections were stable and there was no entries in the syslog indicating any errors in the router. I have downgraded to see if this solves the problem.

I tried to upgrade again, and changed my channel from 13 to 12, since then the wireless has been stable for 7 days now as long as I use a laptop with Atheros wireless card, but the connection from a laptop with a Intel PRO/Wireless 3945ABG card the connection is unstable, so I had to downgrade to the 7g version again to be able to use both my laptops.

Roger
23-11-2007, 16:02
max2950

Wireless Issue

I have an issue with wireless.

My WL500g is used as wireless access point only. Another machine is doing DHCP and the routing job.
When i wake up my PC from hibernation it fails to autheticate to the wireless network. I have to reboot in order to be able to connect.......

My laptop is using a Ralink RT61 based card. I have the same issue on my desktop PC with a Ralink RT2500 card......

I'm using WPA-PSK with AES......... I had no prolem wit 1.2.9.2.7g

Edit :Finally my main WL500 died yesterday evening, i guess the WLAN card gave up because it is still working fine for wired conections......Strange coincidence...... I replaced it with my other one and now it is working fine with older firmwre i will give the new one a try.
25-11-2007, 21:47
miloman

Quote:

Originally Posted by rogerrb

I tried to upgrade again, and changed my channel from 13 to 12, since then the wireless has been stable for 7 days now as long as I use a laptop with Atheros wireless card, but the connection from a laptop with a Intel PRO/Wireless 3945ABG card the connection is unstable, so I had to downgrade to the 7g version again to be able to use both my laptops.

Roger

Same problems here with a centrino (Intel 2200BG): wireless signal gets lost, and will restore after 30secs or so. Went back to 7g also....:mad:
It is a pity, because WDS with WPA seemed to work :)

BTW: is there an easy way to get the wireless MAC of the WL500Gx (get it from the router-menu or alike)?
26-11-2007, 18:28
max2950

Quote:

Originally Posted by miloman

Same problems here with a centrino (Intel 2200BG): wireless signal gets lost, and will restore after 30secs or so. Went back to 7g also....:mad:
It is a pity, because WDS with WPA seemed to work :)

BTW: is there an easy way to get the wireless MAC of the WL500Gx (get it from the router-menu or alike)?

I have same issue here with a Ralink NIC. Atheros and Intel 2200BG are working fine. Using WPA-PSK with TKIP seems a little more stable than AES....
26-11-2007, 18:44
miloman

Quote:

Originally Posted by max2950

I have same issue here with a Ralink NIC. Atheros and Intel 2200BG are working fine. Using WPA-PSK with TKIP seems a little more stable than AES....

But Ralink is wired, yes? If dont't think I have probs on wired connections.
26-11-2007, 18:46
max2950

Quote:

Originally Posted by miloman

But Ralink is wired, yes? If dont't think I have probs on wired connections.

No Ralink is Wireless, it's a RT61 based card.
26-11-2007, 20:33
miloman

Quote:

Originally Posted by max2950

No Ralink is Wireless, it's a RT61 based card.

Ok, I stand corrected. :) Let's see what the experts have to say.
26-11-2007, 23:29
WiziPok

DHCP problems

Hi,

during first 2 days mz ASUS was so good as never before. But today I recognized, the my syslog file is much more bigger as before.
As I find before, in same cases my WIRELESS PC couldnot get the IP by DHCP ...but my syslog shows something different:
Here is my log fyle regarding to DHCP:

Code:

Nov 26 10:51:01 Klub-Net1 daemon.info dnsmasq[72]: DHCPACK(br0) 192.168.1.30 00:08:02:33:03:0f admin-30fb4e58c Nov 26 10:51:01 Klub-Net1 daemon.info dnsmasq[72]: DHCPDECLINE(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:51:14 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:51:14 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:51:19 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:51:19 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:51:28 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:51:28 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:51:43 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:51:43 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:52:19 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:52:19 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:52:19 Klub-Net1 daemon.info dnsmasq[72]: DHCPREQUEST(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:52:19 Klub-Net1 daemon.info dnsmasq[72]: DHCPACK(br0) 192.168.1.30 00:08:02:33:03:0f admin-30fb4e58c Nov 26 10:52:19 Klub-Net1 daemon.info dnsmasq[72]: DHCPDECLINE(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:52:32 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:52:32 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:52:35 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:52:35 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:52:43 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:52:43 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:52:58 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:52:58 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:53:36 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:53:36 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:53:36 Klub-Net1 daemon.info dnsmasq[72]: DHCPREQUEST(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:53:36 Klub-Net1 daemon.info dnsmasq[72]: DHCPACK(br0) 192.168.1.30 00:08:02:33:03:0f admin-30fb4e58c Nov 26 10:53:36 Klub-Net1 daemon.info dnsmasq[72]: DHCPDECLINE(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:53:49 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:53:49 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:53:52 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:53:52 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:53:59 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:53:59 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:54:15 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:54:15 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:54:53 Klub-Net1 daemon.info dnsmasq[72]: DHCPDISCOVER(br0) 00:08:02:33:03:0f Nov 26 10:54:53 Klub-Net1 daemon.info dnsmasq[72]: DHCPOFFER(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:54:53 Klub-Net1 daemon.info dnsmasq[72]: DHCPREQUEST(br0) 192.168.1.30 00:08:02:33:03:0f Nov 26 10:54:53 Klub-Net1 daemon.info dnsmasq[72]: DHCPACK(br0) 192.168.1.30 00:08:02:33:03:0f admin-30fb4e58c Nov 26 10:54:53 Klub-Net1 daemon.info dnsmasq[72]: DHCPDECLINE(br0) 192.168.1.30 00:08:02:33:03:0f

so, by this was filled 5x 200kb syslog files.
Using DHCP on my WIRELESS PC I couldnot connect. Using Fixed IP is everything works fine.

Any comments, why the DHCP hangs?

With best regards
WiZi
30-11-2007, 11:52
r-win

Hi Oleg,

upgraded from the previous release and it works great. Thank you for your effort!

Is it possible to upgrade dnsmasq to the latest version? The version which is included doesn't have support for tagging based on mac addresses (usefull for openvpn clients).
30-11-2007, 18:07
Oleg

Quote:

Originally Posted by r-win

Is it possible to upgrade dnsmasq to the latest version? The version which is included doesn't have support for tagging based on mac addresses (usefull for openvpn clients).

Perhaps. :rolleyes:

Show 40 post(s) from this thread on one page