Printable View
Sda = 1Gb Flash Pen (Swap at sda1 and /opt at sda2)
Sdb = Sdb1 ext3 formated Iomega 1Tb disk
The sdb stops working after some reads and writes (see syslog.log file attached on previous post)
And as you can read on previous posts from March I've tried everything except install other firmwares.
Such errors (-71), if not observed before, usually means bad usb cable or insufficient power for HDD.Quote:
Originally Posted by s1za
1. The Iomega 1Tb are external 3.5 disks and have a external power suply;Quote:
Originally Posted by lly
2. Everything worked for 2 years on a asus 500gp without any problems;
3. The drives work perfectly (same power suply and same usb cables) attached to laptop (either windows or ubuntu)
4. the problems started when I switch the 500gp for the RT-N16 with this firmwares (I didn't tried with the original asus firmware)
I don't want to say that your HDD is bad, it has some kind of "specific"...Quote:
Originally Posted by s1za
Does your ubuntu use obsolete 2.6.22 (or older) kernel? ;)Quote:
3. The drives work perfectly (same power suply and same usb cables) attached to laptop (either windows or ubuntu)
Well, but we neither can't switch to newer kernel, nor completed usb backport yet :(Quote:
4. the problems started when I switch the 500gp for the RT-N16 with this firmwares (I didn't tried with the original asus firmware)
P.S. Mine hitachi usb hdd works well with RT-N16...
I'm trying to find a solution by excluding all the variables and it's not from disks itself but maybe from the combination of this disks with this firmware (even though I had similar results with 2.5 hdd).Quote:
Originally Posted by lly
Kernel is used on ubuntu 10.04 is 2.6.32
Thank's for your reply's
You can try teddy_bear Tomato K26 mod, he done some more usb backports. If it is helps, I can do fast migration of his backports.Quote:
Originally Posted by s1za
tried tomato with same result :(Quote:
Originally Posted by lly
nevertheless found this page in Portuguese/Brazilian :D
http://www.anselmolsm.org/blog/coole...x-craft-linux/
translated by google to english
http://translate.google.com/translat...x/&sl=pt&tl=en
(you can ask me if have any doubt with the translation ;) ) that as a link to a patch to a very similar problem. Do you think it my help?
http://www.anselmolsm.org/blog/files...6.27-rc8.patch
explained here
http://git.kernel.org/?p=linux/kerne...86143fb2026949
I managed to turn on WPA2.
it took me some time since it only worked after I pressed the reset button on the back of the router:p
I've completely worked my way trough the web-admin again to reconfigure everything, and now it's working stable.
furthermore, I can switch between encryption modes now:)
Also the ethernet bridge between my wl-500w and my rt-n16 is better now with wpa2, I can get a troughput of ~6MB/s sometimes:)
but usually around 2MB/s
Nice to find out a way for WPA2. So the first post sholud be correted, when say: WPA 2 does not work yet.Quote:
Originally Posted by wpte
As I can see, problem in this article slightly differ than yours.Quote:
Originally Posted by s1za
It describes problem with initial hdd recognition and you observe problem after successful hdd initialization, right?
Anyway, I can include patch above for tests. Can you compile FW yourself?
You are right. I can compile the FW for testing.Quote:
Originally Posted by lly
Also find this:
http://www.howtofixcomputers.com/for...1-a-20161.html
with this bug
https://bugzilla.kernel.org/show_bug.cgi?id=7932
cannot find the patch link. Continue to search as everything points to a Kernel bug.
http://www.linuxquestions.org/questi...2/#post3269374
On this one I could not find the /sys/module/usbcore/parameters/autosuspend parameter...
Thank's
Power management (CONFIG_PM & CONFIG_USB_SUSPEND) disabled in both original ASUS & our FW.Quote:
Originally Posted by s1za
hi lly.Quote:
Originally Posted by lly
No more FW night builds of RT-N16 ftp://core.dumped.ru/rt-n/ ?
Thanks.
C.
Yes, they are. Link works again ...Quote:
Originally Posted by crbrss
Does this firmware supports USB Webcam? I tried it with my Logitech Quickcam Pro 4000 on my RT-N16, does not work. The same camera works with WL-500G.