Ìîäåì ZTE MF100/MF112/MF180/MF190/MF192 è ðîóòåð Asus

Quote:

---

Originally Posted by vectorm

Êàê íàñòðîèòü ìîäåì.

---

Ñïàñèáî çà ïîäñêàçêó - íà÷àë êîïàòüñÿ:
Ðîóòåð (WL500gpv2, 1.9.2.7-rtn-r3300) - ìîåãî ìîäåìà (ZTE MF190) íåò â ñïèñêå modems.conf - ó íåãî Vendor=19d2 ProdID=2000,
À ïðîøèâêà 1.9.2.7-rtn-r3300 åãî íå çíàåò èç ZTE ìîäåìîâ, çíàåò òîëüêî 19d2:1218, 19d2:2002, 19d2:2003.

Âûäàåò îøèáêó :
pppd: In file /tmp/ppp/peers/wan0_pppd: unrecognized option '/dev/ttyUSB0'
wan0_pppd exit code: 2, try to reconnect /dev/ttyUSB0.

Óñòðîéñòâà ttyUSB0 ïðîñòî íåò (- íå óñòàíîâëåíî?) â ñïèñêå óñòðîéñòâ
×òî äåëàòü äàëüøå? Êóäà êîïàòü?

Quote:

---

Originally Posted by iuytrewq

Óñòðîéñòâà ttyUSB0 ïðîñòî íåò (- íå óñòàíîâëåíî?) â ñïèñêå óñòðîéñòâ
×òî äåëàòü äàëüøå? Êóäà êîïàòü?

---

Íó õîòÿ áû ïðèëîæèòü Diagnostic Info.

Quote:

---

Originally Posted by rss

Íó õîòÿ áû ïðèëîæèòü Diagnostic Info.

---

Íà âñÿêèé ñëó÷àé ïðèëàãàþ:
Diagnostic Information - Status Information

Code:

---

Kernel Modules

option 21488 0 - Live 0xc0151000
usbserial 32960 1 option, Live 0xc016b000
cdc_acm 15056 0 - Live 0xc0158000
ntfs 125776 0 - Live 0xc01d1000
usb_storage 86560 0 - Live 0xc01ba000
sd_mod 24416 0 - Live 0xc0120000
scsi_mod 97024 2 usb_storage,sd_mod, Live 0xc01a1000
usblp 14512 0 - Live 0xc0130000
ohci_hcd 20976 0 - Live 0xc0129000
ehci_hcd 40528 0 - Live 0xc0146000
usbcore 143296 8 option,usbserial,cdc_acm,usb_storage,usblp,ohci_hcd,ehci_hcd, Live 0xc017d000
nf_nat_ftp 2336 0 - Live 0xc0110000
nf_conntrack_ftp 7424 1 nf_nat_ftp, Live 0xc010d000
wl 2009664 0 - Live 0xc036b000 (P)
et 58080 0 - Live 0xc0136000 (P)
igs 17552 1 wl, Live 0xc011a000 (P)
emf 21280 2 wl,igs, Live 0xc0113000 (P)

USB Devices

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.19 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:03.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.19 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:03.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0424 ProdID=2502 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=2000 Rev= 0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
S:  SerialNumber=MF190AZTED010000
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

USB devfs Devices

Device        : Location : Info

PPP chat log

pppd: In file /tmp/ppp/peers/wan0_pppd: unrecognized option '/dev/ttyUSB0'
wan0_pppd exit code: 2, try to reconnect /dev/ttyUSB0.
pppd: In file /tmp/ppp/peers/wan0_pppd: unrecognized option '/dev/ttyUSB0'
wan0_pppd exit code: 2, try to reconnect /dev/ttyUSB0.
pppd: In file /tmp/ppp/peers/wan0_pppd: unrecognized option '/dev/ttyUSB0'
wan0_pppd exit code: 2, try to reconnect /dev/ttyUSB0.
pppd: In file /tmp/ppp/peers/wan0_pppd: unrecognized option '/dev/ttyUSB0'
wan0_pppd exit code: 2, try to reconnect /dev/ttyUSB0.

CPU Info

system type                : Broadcom BCM5354 chip rev 2 pkg 0
processor                : 0
cpu model                : Broadcom BCM3302 V2.9
BogoMIPS                : 237.05
wait instruction        : no
microsecond timers        : yes
tlb_entries                : 32
extra interrupt vector        : no
hardware watchpoint        : no
ASEs implemented        : mips16
shadow register sets        : 1
VCED exceptions                : not available
VCEI exceptions                : not available

unaligned_instructions        : 0

Memory

MemTotal:        29052 kB
MemFree:          8676 kB
Buffers:          2612 kB
Cached:          6772 kB
SwapCached:          0 kB
Active:          3944 kB
Inactive:        6852 kB
SwapTotal:          0 kB
SwapFree:            0 kB
Dirty:              0 kB
Writeback:          0 kB
AnonPages:        1428 kB
Mapped:          1208 kB
Slab:            2684 kB
SReclaimable:      664 kB
SUnreclaim:      2020 kB
PageTables:        216 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
WritebackTmp:        0 kB
CommitLimit:    14524 kB
Committed_AS:    3788 kB
VmallocTotal:  786356 kB
VmallocUsed:      3852 kB
VmallocChunk:  780888 kB

---

Quote:

---

Originally Posted by iuytrewq

×àñòü 3:

Code:

---

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=2000 Rev= 0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
S:  SerialNumber=MF190AZTED010000
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

---

---

Ïðîáëåìà â òîì, ÷òî ìîäåì íå ïåðåêëþ÷àåòñÿ èç ZeroCD â ðåæèì ìîäåìà. Ëèáî ÷òî-òî ñ ïðîøèâêîé ìîäåìà, ëèáî "Zero CD Configuration" óñòàíîâëåíî íå â Auto.

Ïîïðîáîâàë îáíîâèòü ïðîøèâêó 3422 > 3533. Ïåðåñòàë ïåðåêëþ÷àòüñÿ ìîäåì
ZTE mf 192 (Íå íàõîäèë íà äàòà ïîðòó). ×àñ ïûòàëñÿ ðàçîáðàòüñÿ - çàíîâî âñå íàñòðîèòü-ðåçóëüòàò íîëü. Ïåðåïðîøèëñÿ îáðàòíî íà 3422 âñå çàâåëîñü ñðàçó. Ëîãîâ íå ñîõðàíèë. Êòî ìîæåò ïîäñêàçàòü, â ÷åì ìîÿ êðèâîðóêîñòü íà íîâûõ ïðîøèâêàõ? Íà 3422 ðàáîòàåò òàê
Zero CD Configuration: Auto
Modem type: GPRS/EDGE/UMTS/HSDPA
Autodetect device: Yes (Äàëüøå ñåðûì öâåòîì)
USB device location ID: 1
Data port: 2
User interface port: 4
USB device Vendor ID (0xabcd): 0x19d2
USB device Product ID (0xef01): 0x1218

Quote:

---

Originally Posted by 0range

Ïîïðîáîâàë îáíîâèòü ïðîøèâêó 3422 > 3533. Ïåðåñòàë ïåðåêëþ÷àòüñÿ ìîäåì
ZTE mf 192 (Íå íàõîäèë íà äàòà ïîðòó). ×àñ ïûòàëñÿ ðàçîáðàòüñÿ - çàíîâî âñå íàñòðîèòü-ðåçóëüòàò íîëü. Ïåðåïðîøèëñÿ îáðàòíî íà 3422 âñå çàâåëîñü ñðàçó. Ëîãîâ íå ñîõðàíèë. Êòî ìîæåò ïîäñêàçàòü, â ÷åì ìîÿ êðèâîðóêîñòü íà íîâûõ ïðîøèâêàõ? Íà 3422 ðàáîòàåò òàê
Zero CD Configuration: Auto
Modem type: GPRS/EDGE/UMTS/HSDPA
Autodetect device: Yes (Äàëüøå ñåðûì öâåòîì)
USB device location ID: 1
Data port: 2
User interface port: 4
USB device Vendor ID (0xabcd): 0x19d2
USB device Product ID (0xef01): 0x1218

---

Èñïðàâëåíî â r3534.

Ïðèâåò Âñåì...

Ïûòàþñü ïîäðóæèòü êèåâñòàð ìîäåì ZTE MF180S è ASUS WL500gpV2
Ïîìîãèòå ëþäè.. íåçíàþ çà ÷òî õâàòàòñÿ óæå âñå ÷òî ìîã ïåðå÷èòàë.

1.Îòêëþ÷èë ZeroCD
2.Çàøèë ïðîøèâêó â ðîóòåð WL500gpv2-1.9.2.7-d-r2624.trx
Ìîäåì íàøåëñÿ ïðîïèñàë âðîäå âñå âåðíî... õîòÿ íå óâåðåí ïîòîìó ÷òî íå ðàáîòàåò.
Ïîäêëþ÷àåòñÿ ìîäåì â ñåòü è ìåðòâî. Êóäà áåæàòü ÷òî äåëàòü íåïîéìó.
Ïîìîãèòå ïîæàëóéñòà

Code:

---

Calling UMTS/GPRS
ATZ
OK
AT+CGDCONT=1,"IP","www.kyivstar.ua"
OK
ATD*99#
CONNECTchat:  Jan 01 00:00:21 CONNECT 3600000
Script /tmp/ppp/peers/chat.sh finished (pid 155), status = 0x0
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/usb/tts/2
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x9aad5e3f>]
rcvd [LCP ConfReq id=0x18 <asyncmap 0x0> <auth chap MD5> <magic 0x18a77f3> <pcomp> <accomp>]
sent [LCP ConfRej id=0x18 <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x9aad5e3f>]
rcvd [LCP ConfReq id=0x19 <asyncmap 0x0> <auth chap MD5> <magic 0x18a77f3>]
sent [LCP ConfAck id=0x19 <asyncmap 0x0> <auth chap MD5> <magic 0x18a77f3>]
sent [LCP EchoReq id=0x0 magic=0x9aad5e3f]
rcvd [LCP DiscReq id=0x1a magic=0x18a77f3]
rcvd [CHAP Challenge id=0x1 <a476b3c0d26b3246fecb4498cadeaccc>, name = "UMTS_CHAP_SRVR"]
sent [CHAP Response id=0x1 <946fa6ce62a3b38b0c17d53f8585dd90>, name = "kyivstar"]
rcvd [LCP EchoRep id=0x0 magic=0x18a77f3 9a ad 5e 3f]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <mppe -H -M -S -L -D +C> <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
rcvd [LCP ProtRej id=0x1b 80 fd 01 01 00 12 12 06 00 00 00 01 1a 04 78 00 18 04 78 00]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfNak id=0x1 <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
IPCP: timeout sending Config-Requests
sent [LCP TermReq id=0x2 "No network protocols running"]
sent [LCP TermReq id=0x3 "No network protocols running"]
Connection terminated.

---

Ïðîäîëæó ñàì.
Ïåðåøèë ðîóòåð íà WL500gpv2-1.9.2.7-rtn-r3497.trx
Ñèòóàöèÿ íå èñïðàâèëàñü... ëîã ñòàë êîðî÷å.. :)
Âîçìîæíî ýòî êàëè÷íûé ìîäåì âèíîâàò íî ïîìåíÿòü åãî íåò âîçìîæíîñòè.
Ïðîøó î÷åíü ïîìîãèòå ñ ýòèì âñåì ïîïàñòü â ñåòü.

Code:

---

Calling WCDMA/UMTS/GPRS
ATZ
OK
AT+CFUN=1
OK
AT+CGDCONT=1,"IP","www.kyivstar.ua"
OK
ATD*99#
CONNECTchat:  Jan 01 00:00:28 CONNECT 3600000
Script /tmp/ppp/peers/wan0_chat.sh finished (pid 413), status = 0x0
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB2
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xdc559c85>]
rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <auth chap MD5> <magic 0x1a42640> <pcomp> <accomp>]
sent [LCP ConfRej id=0x4 <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xdc559c85>]
rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <auth chap MD5> <magic 0x1a42640>]
sent [LCP ConfAck id=0x5 <asyncmap 0x0> <auth chap MD5> <magic 0x1a42640>]
sent [LCP EchoReq id=0x0 magic=0xdc559c85]
rcvd [LCP DiscReq id=0x6 magic=0x1a42640]
rcvd [CHAP Challenge id=0x1 <c8e36237e07b583d96ce2c7c8a19af61>, name = "UMTS_CHAP_SRVR"]
sent [CHAP Response id=0x1 <49e5536d9aceff3ad50316330d9a1063>, name = "kyivstar"]
rcvd [LCP EchoRep id=0x0 magic=0x1a42640 dc 55 9c 85]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
CHAP authentication succeeded
Script /tmp/ppp/auth-up started (pid 418)
sent [CCP ConfReq id=0x1 <mppe -H -M -S -L -D +C> <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
Script /tmp/ppp/auth-up finished (pid 418), status = 0x0
rcvd [LCP ProtRej id=0x7 80 fd 01 01 00 12 12 06 00 00 00 01 1a 04 78 00 18 04 78 00]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfNak id=0x1 <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Hangup (SIGHUP)
Modem hangup
Script /tmp/ppp/auth-down started (pid 419)
Connection terminated.
Connect time 0.1 minutes.
Sent 74 bytes, received 28 bytes.
Script /tmp/ppp/auth-down finished (pid 419), status = 0x0

---

Ìîæåò ïîïðîáîâàòü ìîäåì ïðîøèòü? Ó ìåíÿ MF180 îò Áèëàéíà áûë ÿ åãî ïðîøèë è îòâÿçàë îò îïåðàòîðà, îòëè÷íî ñòàë ðàáîòàòü.

Quote:

---

Originally Posted by terrabyte

Ìîæåò ïîïðîáîâàòü ìîäåì ïðîøèòü? Ó ìåíÿ MF180 îò Áèëàéíà áûë ÿ åãî ïðîøèë è îòâÿçàë îò îïåðàòîðà, îòëè÷íî ñòàë ðàáîòàòü.

---

Ïåðåøèòü â ñìûñëå ñìåíèòü â ìîäåìå ïðîøèâêó èëè ïåðåéòè íà äðóãîãî îïåðàòîðà. Ìîäåì òî óæå ïîäêëþ÷åí íà êèåâñòàð ñåòü è îïëà÷åí.
Åñëè ó òåáÿ åñòü îïûò êàê çàìåíèòü ïðîøèâêó â ìîäåìå áóäó áëàãîäàðåí åñëè òû ïîäåëèøñÿ îïûòîì.

Quote:

---

Originally Posted by adv75

Ïåðåøèòü â ñìûñëå ñìåíèòü â ìîäåìå ïðîøèâêó èëè ïåðåéòè íà äðóãîãî îïåðàòîðà. Ìîäåì òî óæå ïîäêëþ÷åí íà êèåâñòàð ñåòü è îïëà÷åí.
Åñëè ó òåáÿ åñòü îïûò êàê çàìåíèòü ïðîøèâêó â ìîäåìå áóäó áëàãîäàðåí åñëè òû ïîäåëèøñÿ îïûòîì.

---

Âîò Âàø çåìëÿê çàíèìàåòñÿ. Ìîæåò ïîìîæåò.
http://www.alexcellular.narod.ru/mf180.html

ÍÅ ïîìîãëà ïåðåïðîøèâêà. :( ðåçóëüòàò òîòæå
Ïîäêëþ÷àþ íà ïðÿìóþ â êîìïüþòåð â èíòåðíåò ïîïàäàþ. ×åðåç ðîóòåð øèø...

Ïðîøèë wl500gP 3422>3552, êàê òî äîëãî ñòàëî ïðîèñõîäèòü ïåðåêëþ÷åíèå ìîäåìà zte mf 192, è êîííåêò ê ñåòè (ëîã â 3422 ãîðàçäî äëèííåå, íàâåðíî íå âàæíî). Ñîçäàí ôàéë post-firewall êîòîðûé äåëàåò pwrled off, íî â 3552 /usr/local/sbin/post-firewall íå ñóùåñòâóåò, êóäà äåëèñü íå çíàþ. Ïðîøèâêà íà 3422 âîçâðàùàåò âñå íà ñâîè ìåñòà (ôàéë ñóùåñòâóåò è îòðàáàòûâàåò). Ñîõðàíèë íåñêîëüêî ëîãîâ.

äîáðûé âå÷åð âñåì.
3è ñóòêè áüþñü ñ ZTE180 è rt-n16. ïðîáîâàë ðàçíûå ïðîøèâêè, íà íåêîòîðûõ íå ôèäèò ìîäåì, íà íåêîòîðûõ â ìîäåì íå ïåðåêëþ÷àåòñÿ. äâå áîëåå ìåíåå ðàáî÷èå RT-N16-1.9.2.7-rtn-r3497 è RT-N16-1.9.2.7-rtn-r3381.
ïðîáëåìà â ñëåäóþùåì:
áåç äîï ïàðàìåòðîâ ÀÒ: ATE0' '' 'AT+ZOPRT=5' '' 'AT+ZSTART' '' 'AT+CPBS="SM"' '' 'AT+CPMS="SM","SM","" ìîäåì òóïî âåøàåòñÿ. ñ ýòèìè êîìàíäàìè ðàáîòàåò íî êàæäûå 3 ìèíóòû ïàäàåò ñîåäèíåíèå çàòåì ïåðåïîäêëþ÷àåòñÿ è îïÿòü ÷åðåç 3 ìèíóòû òî æå ñàìîå.
âîò ëîã ñ ïðîøèâêè rtn-r3381:

PHP Code:

---

Nov 22 14:46:09 pppd[389]: LCP terminated by peer
Nov 22 14:46:09 pppd[389]: Connect time 3.1 minutes.
Nov 22 14:46:09 pppd[389]: Sent 164252 bytes, received 475985 bytes.
Nov 22 14:46:09 pppd[389]: Hangup (SIGHUP)
Nov 22 14:46:09 pppd[389]: Modem hangup
Nov 22 14:46:09 pppd[389]: Connection terminated.
Nov 22 14:46:09 dnsmasq[217]: read /etc/hosts - 2 addresses
Nov 22 14:46:09 dnsmasq[217]: using nameserver 85.115.225.129#53
Nov 22 14:46:09 dnsmasq[217]: using nameserver 85.115.224.18#53
Nov 22 14:46:09 3G USB Modem: Disconnected
Nov 22 14:46:16 pppd[389]: Serial connection established.
Nov 22 14:46:17 pppd[389]: Using interface ppp0
Nov 22 14:46:17 pppd[389]: Connect: ppp0 <--> /dev/ttyUSB2
Nov 22 14:46:18 pppd[389]: CHAP authentication succeeded
Nov 22 14:46:18 pppd[389]: CHAP authentication succeeded
Nov 22 14:46:19 pppd[389]: Could not determine remote IP address: defaulting to 10.64.64.64
Nov 22 14:46:19 pppd[389]: local  IP address 172.20.135.122
Nov 22 14:46:19 pppd[389]: remote IP address 10.64.64.64
Nov 22 14:46:19 pppd[389]: primary   DNS address 85.115.224.18
Nov 22 14:46:19 pppd[389]: secondary DNS address 85.115.225.129
Nov 22 14:46:19 miniupnpd[465]: version 1.6 started
Nov 22 14:46:19 miniupnpd[465]: MiniUPnPd is already running. EXITING
Nov 22 14:46:19 3G USB Modem: connected to ISP
Nov 22 14:46:19 dnsmasq[217]: read /etc/hosts - 2 addresses
Nov 22 14:46:19 dnsmasq[217]: using nameserver 85.115.225.129#53
Nov 22 14:46:19 dnsmasq[217]: using nameserver 85.115.224.18#53
Nov 22 14:46:19 miniupnpd[446]: received signal 15, good-bye 


---

Quote:

---

Originally Posted by robik

äîáðûé âå÷åð âñåì.
3è ñóòêè áüþñü ñ ZTE180 è rt-n16. ðàáîòàåò íî êàæäûå 3 ìèíóòû ïàäàåò ñîåäèíåíèå çàòåì ïåðåïîäêëþ÷àåòñÿ è îïÿòü ÷åðåç 3 ìèíóòû òî æå ñàìîå.

---

Ìîäåì Áèëàéíîâñêèé íå ïåðåïðîøèòûé?
//Ýòî áûëà ïîäñêàçêà//