Is it possible to control the LEDs on the wl-hdd? The wl-hdd is in the same room as where I sleep, and the constant flashing is driving me nuts.
Printable View
Is it possible to control the LEDs on the wl-hdd? The wl-hdd is in the same room as where I sleep, and the constant flashing is driving me nuts.
nonblinking LEDs are controllable. Other not. Add switch.
So basically the annoying ones are not controllable? Guess it is old mister duct tape to the rescue then:)Quote:
Originally Posted by oleo
@rumagent
... maybe you could easily turn the wlhdd near to the wall with the leds ... or simply put a small black tape / cover on the leds side :o
maybe it like the flashing red led on the boxed CD double version of "Pink Floyd - Pulse" ... ... one AA Battery get the Led blink f :D or more than two years :rolleyes:
Good luck
Martin
Hi,
you can switch off the power LED by:
echo 1 > /dev/gpio/out
the WL LED you can't switch off,
i recommend you chewing gum ;)