WPA2 on WL-500g

Hello,

i read on Asus Webpage that one of the newest BETA firmwares for WL-500g will support WPA2 authentification?
Im using Firmware 1.9.2.7 my WL-500g but it does not support WPA2!

And on the other side i am using WL-100g! If there is a firmware for my WL-500g supporting WPA2 is there still a driver for WL-100g which supports WPA2,too?

Many Thx for helping!

Shawn

Nobody could give me an answer?

Shawn

WPA2 is supported for sure starting with 1.9.2.7.

Hello Oleg,

thanks for answering. But how can i activate it in my Asus Router!
I only have these authentifications.

- Open System or Shared Key
- Shared key
- WPA-PSK
- WPA
- Radius with 802.1x

but i couldnt see anything ybout WPA2!

Many Thanks for helping!

Shawn

WPA and WPA-PSK modes are WPA2 too.

Quote:

---

Originally Posted by Oleg

WPA and WPA-PSK modes are WPA2 too.

---

hello
i'd like to set wpa2 only, i've tried this :
nvram set wl0_pkm=psk2
nvram commit
reboot

nvram get wl0_pkm
psk psk2

why nvram don't commit

ps: WL500g-1.9.2.7-6c-pre5.trx

thank's a lot

i find my own solution.

- in the web interface "Authentication Method:" open system shared key
-reboot
-telnet :

nvram set wl0_pkm=pk2
nvram commit
reboot
nvram get wl0_pkm
pk2


it's work !!!!
:) :)


thank's oleg for your job !!!!!!!!!!

So, the WPA-1 still works if i didnt do anythink, what DOS did

up. Don't you understand me?

yes i unterstand you, but i'm busy ! sorry !!!
your right if you do nothing when you set wpa-psk in the web interface, wpa1-psk et wpa2-psk work together.


telnet: wl wpa_auth
psk psk2

It's strange but this command gave me

Code:

---

WPA auth mode 132

---

It means WPA-PSK/WPA-Personal AND WPA2-PSK/WPA2-Personal ?

In my wl500gx there is no wl0_pkm variable. What shoul i do to activate WPA2-PSK only ?

yes,i explain to you !

wpa_auth 4 (WPA-PSK/WPA-Personal)
wpa auth 128 (WPA2-PSK/WPA2-Personal)

128+4=132 (WPA-PSK/WPA-Personal+WPA2-PSK/WPA2-Personal)


you have the detail with "wl"

I've done wl wpa_auth 128 and i cant connect via wpa-1 any more. Is it enough? (wl500g Deluxe)
So, no nvram needed.

i think yes !!:) :)

Quote:

---

Originally Posted by FilimoniC

I've done wl wpa_auth 128 and i cant connect via wpa-1 any more. Is it enough? (wl500g Deluxe)
So, no nvram needed.

---

Yep, that works for me too.
add that line to /usr/local/sbin/post-boot and after a reboot it will still accept wpa-2 only. :D

regards
P