How to make /usr/local/sbin/resetpressed template work on WL-HDD?
I think the /usr/local/sbin/resetpressed template was added after 1.9.2.7-7f (2006-11-06).
CDMA@wifi - History of versions
Quote:
1.9.2.7-7f-USB-1.64
/usr/local/sbin/resetpressed script is executed when pressing reset button and releasing when PWR light is off
and in 1.9.2.7-7g (2007-04-06)
Quote:
23. Disabled "power off" for all units except WL-HDD
24. Pressing EZ SETUP button for 3 seconds would cause /usr/local/sbin/ez-setup to be executed
The /usr/local/sbin/resetpressed template doesn't work on WL-HDD because holding reset button will actually "power off" WL-HDD. Besides, if it takes at least 3 seconds to activate /usr/local/sbin/ez-setup, it would be very difficult to activate resetpressed without powering off WL-HDD.
I'd like to write some scripts and use reset button as wifi toggle on my WL-HDD because there's no other buttons. What can I do to prevent reset button from powering off WL-HDD? Does the /usr/local/sbin/resetpressed template work on WL-HDD? Is it possible to check whether the reset button being pressed or released?
BTW, I know that "echo 1 > /dev/gpio/out" turns the PWR LED off on WL-HDD and "echo 0 > /dev/gpio/out" turns it on. Does other numbers mean anything?
Thanks in advance.
Paul
