Help: cannot use ext2 on usb flash stick with Oleg 1.9.2.7-10 (but can use ext3)
Hi,
When reading several articles on mounting usb flash devices under linux,
many of them advice to use ext2 i.s.o. ext3 to prevent premature flash wearout, in combination with mounting such partitions with -o noatime.
However, when trying to get this to work with Oleg's firmware 1.9.2.7-10
it will not mount the ext2 partition.
I used fdisk to wipe all partitions and make a fresh one:
fdisk -l
Disk /dev/scsi/host0/bus0/target0/lun0/disc: 131 MB, 131072000 bytes
16 heads, 32 sectors/track, 500 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Device Boot Start End Blocks Id System
/dev/scsi/host0/bus0/target0/lun0/part1 1 500 127984 83 Linux
I formatted to ext2 partition with
mke2fs /dev/discs/disc0/part1
which completed succesful.
Trying to mount it however will fail
mount -t ext2 /dev/discs/disc0/part1 /opt
mount: Mounting /dev/discs/disc0/part1 on /opt failed: No such device
If however I format using ext3, everything is A OK.
mke2fs -j /dev/discs/disc0/part1
mount -o noatime /dev/discs/disc0/part1 /opt
df gives:
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 3072 3072 0 100% /
/dev/discs/disc0/part1 123939 4127 113413 4% /opt
How to proceed? I thought ext2 should work in all situations??
I really want to prevent flash wearout due to ext3, and want to use ext2.
