PDA

Bekijk de volledige versie : Firmware v1.8.1.9


Viper_Rus
02-10-2004, 11:50
USE THIS FIRMWARE AT YOUR OWN RISK!
Firmware for the WL-300g can be found here:

http://www.asus.com/pub/ASUS/wireless/WL-300g-03/wg01080109_WL300g_EN.zip
http://www.asus.com.tw/pub/ASUS/wireless/WL-300g-03/wg01080109_WL300g_EN.zip
ftp://ftp.asus.com.tw/pub/ASUS/wireless/WL-300g-03/wg01080109_WL300g_EN.zip
http://www.asuscom.de/pub/ASUS/wireless/WL-300g-03/wg01080109_WL300g_EN.zip
http://www.asus.it/pub/ASUS/wireless/WL-300g-03/wg01080109_WL300g_EN.zip
ftp://www.asus.it/pub/ASUS/wireless/WL-300g-03/wg01080109_WL300g_EN.zip

Changelog:

currently not known


important!!

When upgrading from 1.7.x.x based firmware: you MUST Reset your WL300g to defaults via the restore button at the back when the power is already on after upgrading to this firmware!

you do not have to do this when you upgrade from 1.8.x.x based firmware!
but it is suggested when you encounter problems

Do not import saved settings from older/other firmwares! this can cause unstability to your device
Viper_Rus
03-10-2004, 12:09
Now! WPA Secure Mode work in WDS Bride connention mode.
Goner
04-10-2004, 15:20
posted link does not work anymore ... :-(

does anybody have a link that works ???

edit : oh wait, it works now !! don't know what happened, but i'm downloading.
thanks !!

wonder why they didn't put it on their regular wl-300g page ??
http://www.asus.com.tw/support/download/item.aspx?ModelName=WL-300G
Goner
04-10-2004, 20:49
anybody else tried this one ??

i had to reset the AP to it's defaults because i couldn't log in as 'admin' anymore. not with the password i set and not with the default password ... so i had to set it up again completely ; WEP, MAC-filter etc.

and it thinks it's Jan 1 1970 ... ('date -s' command doesn't seem to work).
Viper_Rus
04-10-2004, 22:21
anybody else tried this one ??

i had to reset the AP to it's defaults because i couldn't log in as 'admin' anymore. not with the password i set and not with the default password ... so i had to set it up again completely ; WEP, MAC-filter etc.

and it thinks it's Jan 1 1970 ... ('date -s' command doesn't seem to work).
How and where send "data -s" command?
Goner
05-10-2004, 12:26
How and where send "data -s" command?
use : http://<ip-address>/Main_AdmStatus_Content.asp
you can then give Linux commands - this was first used for the WL-300g power-hack.

edit : use 'date 100622522004' (mmddhhmmccyy) to set date/time to 6 oct 2004 22:52
CanterwoodBoy
24-10-2004, 22:50
Under Status & Log / Wireless, there is a new option "radio control", which can be enabled or disabled. Anyone knows what this does?
Antiloop
25-10-2004, 01:14
Under Status & Log / Wireless, there is a new option "radio control", which can be enabled or disabled. Anyone knows what this does?
yeah

it enables or disables your radio(thus your wireless)
brubber
25-10-2004, 01:15
Under Status & Log / Wireless, there is a new option "radio control", which can be enabled or disabled. Anyone knows what this does?This was already present in 1.6.5.3, the manual on the CD that came with your router will tell you what it's doing
Lionking
12-11-2004, 22:45
Is the WL330G also supported with this firmware ?
Antiloop
12-11-2004, 22:57
Is the WL330G also supported with this firmware ?
no certainly not

AFAIK it is not linux based at this moment.. and perhaps never will be

if someone wants to sponsor me a WL330g i'll see if there is potentional to add a forum for it :D