Bekijk de volledige versie : Controlling the LEDs
rumagent
05-04-2007, 20:51
Is it possible to control the LEDs on the wl-hdd? The wl-hdd is in the same room as where I sleep, and the constant flashing is driving me nuts.
nonblinking LEDs are controllable. Other not. Add switch.
rumagent
05-04-2007, 21:59
nonblinking LEDs are controllable. Other not. Add switch.
So basically the annoying ones are not controllable? Guess it is old mister duct tape to the rescue then:)
Martin1802
08-04-2007, 09:54
@rumagent
... maybe you could easily turn the wlhdd near to the wall with the leds ... or simply put a small black tape / cover on the leds side :o
maybe it like the flashing red led on the boxed CD double version of "Pink Floyd - Pulse" ... ... one AA Battery get the Led blink f :D or more than two years :rolleyes:
Good luck
Martin
Fazoletti
12-04-2007, 19:58
Hi,
you can switch off the power LED by:
echo 1 > /dev/gpio/out
the WL LED you can't switch off,
i recommend you chewing gum ;)