WL-500g and Lexmark E232 on LPT

[megaGOLDdeluxe]

Some Details:

AP Mode: Hybrid
Printer: Lexmark E232
Port: LPT

Dear Experts,
I would like to use the Lexmark E232 over the ASUS WL-500g.
Under "Bridge" I set the AP Mode to "Hybrid".
The printer's power status is "on".
In the submenue "Stuts&Logs" I can see the printer-model and its
stuts is "On-line".

Now there is my problem.
I can't print anything.
The way I'm connectet to the printer is exactly the way that the manual
describes. So where ist the problem?!

Hope you can help me a lil.

[Antiloop]

tried different firmwares?
tried custom firmwares with jetdirect printserver?
and at last which firmware are U using ?
you must always notice this

[megaGOLDdeluxe]

i am using the newest firmware from asus...
wich do u think i should use?

[Antiloop]

the one which may work!

try custom firmware: USE the jetdirect printing described at oleg's page

[megaGOLDdeluxe]

ok... i tryed like it is described at oleg's page...
no differce... does not work to...

[Antiloop]

ok... i tryed like it is described at oleg's page...
no differce... does not work to...
:confused:

did you try it when u upgraded to a customized firmware ?
e.g. v1.7.5.9cr5 ?

[megaGOLDdeluxe]

ok... i solved the problem with a print server...
i tried several firmwares... no results...

[Pup]

I've just brought and installed Lexmark E232. Connected on parallel, printing from XP using LPR, without problem. I'm on Oleg's 1.9.2.7-5a. My 500g is also set to "Hybrid" because I've got also another AP in WDS.