Bekijk de volledige versie : WL-500gP resets to default settings

07-03-2007, 19:21
Sometimes after rebooting router resets to default settings (and prints out quick setup prompt after login). It worked fine for two months running

Chance of reset increases when increasing antenna power or adding a USB key.

Could this symptom be related to recent power failure? If shock has damaged power supply would nvram resets reflect that?

Thanks, Buld

13-03-2007, 14:54
i had the same problem but only with 7g pre1.trx firmware

24-03-2007, 09:51
The problem is only when you set the power higher than 80mw.