íå ïîëó÷àåòñÿ óñòàíîâèòü ftpd-topfield

[justason]

Ïî÷åìó-òî íå ïîëó÷àåòñÿ óñòàíîâèòü ftpd-topfield

- Ïîëó÷àåòñÿ ñêà÷àòü ñ àäðåñà íà êîìïüþòåð.
(http://ipkg.nslu2-linux.org/feeds/unslung/wl500g/ftpd-topfield_0.7.1-0_mipsel.ipk)

- Ïîëó÷àåòñÿ óñòàíîâèòü ê ïðèìåðó ÍÀÍÎ.

À âîò ñ ftpd-topfield îáëîì.
-----------

[admin@(none) /tmp]$ ipkg install nano
Upgrading nano on root from 2.0.2-1 to 2.0.3-1...
Downloading http://ipkg.nslu2-linux.org/feeds/unslung/wl500g/nano_2.0.3-1_mipsel.ipk
Configuring nano
Successfully terminated.

[admin@(none) /tmp]$ ipkg install ftpd-topfield
Upgrading ftpd-topfield on root from 0.6.10-2 to 0.7.1-0...
Downloading http://ipkg.nslu2-linux.org/feeds/unslung/wl500g/ftpd-topfield_0.7.1-0_mipsel.ipk
wget: server returned error 404: HTTP/1.1 404 Not Found
Nothing to be done
An error ocurred, return value: 22.
Collected errors:
ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-tChqZY http://ipkg.nslu2-linux.org/feeds/unslung/wl500g/ftpd-topfield_0.7.1-0_mipsel.ipk'
Failed to download ftpd-topfield. Perhaps you need to run 'ipkg update'?
[admin@(none) /tmp]$

[Mam(O)n]

 òîì ðåïîçèòàðèè íåò ftpd-topfield_0.7.1-0. Ïîñëåäíÿÿ âåðñèÿ 0.7.0-0. Âîçìîæíî ýòó âåðñèþ ïðîñòî óáðàëè.
ß äóìàþ ÷òî "ipkg update" èñïðàâèò ñèòóàöèþ, ò.ê. â ñïèñêå ïàêåòîâ (ôàéë Packages) ýòîé âåðñèè íåò. Åñëè íåïîìîæåò, òî ìîæíî êîíêðåòíî óêàçàòü ðàñïîëîæåíèå ïàêåòà - "ipkg install http://ipkg-us-dyoung.nslu2-linux.org/feeds/unslung/wl500g/ftpd-topfield_0.7.0-0_mipsel.ipk"

[Mam(O)n]

Õû. Ãëþê. Ñðàçó è íåçàìåòèë. Íàâåðíîå ÷òîáû ðàçãðóçèòü ñåðâåð áûëè ñäåëàíû çåðêàëà è ïðè îáðàùåíèè íà ipkg.nslu2-linux.org ñåðâåð âûäàåò ïåðåàäðåñàöèþ òî íà ftp.osuosl.org òî íà ipkg-us-dyoung.nslu2-linux.org, íî íà ïîñëåäíåì çåðêàëå ýòîãî ïàêåòà ïðîñòî íåò. Òàê ÷òî óñòàíîâèòü áåç ïðîáëåì ýòîò ïàêåò ìîæíî òîëüêî òàê: "ipkg install http://ftp.osuosl.org/pub/nslu2/feeds/unslung/wl500g/ftpd-topfield_0.7.1-0_mipsel.ipk"

P.S. Êñòàòè îäíî èç çåðêàë äàâíî íå îáíîâëÿëîñü:
http://ftp.osuosl.org/pub/nslu2/feeds/unslung/wl500g/Packages 02-Mar-2007 05:06 226K
http://ipkg-us-dyoung.nslu2-linux.org/feeds/unslung/wl500g/Packages 24-Feb-2007 22:56 225k

[justason]

Ok ïîñòàâèë.

Ñïàñèáî.

[piezomotor]

Ok ïîñòàâèë.

Ñïàñèáî.

Ó ìåíÿ-


root]$ ipkg install http://ipkg-us-dyoung.nslu2-linux.org/feeds/unslung/wl500g/ftpd-topfield_0.7.0-0_mipsel.ipk
Downloading http://ipkg-us-dyoung.nslu2-linux.org/feeds/unslung/wl500g/ftpd-topfield_0.7.0-0_mipsel.ipk
ipkg: invalid magic


È åùå âîò Help-


$ ftpd-topfield --help
Usage: ftpd-topfield [OPTION] ...
Internet File Transfer Protocol server.

-A, --anonymous-only Server configure for anonymous service only
-b, --turbo Default to turbo mode on for transfers
-c, --crc-check Enable crc check on received packets
-D, --daemon Start the ftpd standalone
-d, --debug Debug mode
--device n Select topfield device (first is 0, second is 1, etc.)
-E, --eplf Send listing in EPLF mode
-l, --logging Increase verbosity of syslog messages
-p, --pidfile=[PIDFILE] Change default location of pidfile
-P, --port=[port] Change the port to listen on in server mode
-q, --no-version Do not display version in banner
-R, --resolve-dns Do reverse DNS lookups
-t, --timeout=[TIMEOUT] Set default idle timeout
-T, --max-timeout Reset maximum value of timeout allowed
-u, --umask Set default umask(base 8)
--help Print this message
-V, --version Print version
-a, --auth=[AUTH] Use AUTH for authentication, it can be:
default passwd authentication.


Íî ÿ ïîëó÷àþ îøèáêó-


/opt/sbin/ftpd-topfield -D -P 21 -a password
Warning: option -a ignored


Êàê íàñòîèòü serving directories?

Ñïàñèáî.

[piezomotor]

I have found this-

ftpd-topfield is a program which allows you to communication with your Topfield PVR via the ftp protocol.

My question is if it can work as a stand alone FTP? How can I set configuration?

Thanks.