Firmware v1.8.1.9

[Antiloop]

USE THIS FIRMWARE AT YOUR OWN RISK!
Firmware for the WL-500g can be found here:
http://www.asus.com.cn/pub/ASUS/wireless/WL-500b-03/wg01080109_WL500b_EN.zip
http://www.asuscom.de/pub/ASUS/wireless/WL-500b-03/wg01080109_WL500b_EN.zip
ftp://ftp.asus.com.tw/pub/ASUS/wireless/WL-500b-03/wg01080109_WL500b_EN.zip
http://www.asus.com.tw/pub/ASUS/wireless/WL-500b-03/wg01080109_WL500b_EN.zip

Changelog:

1. Fixed: Remote Port Pringting
2. Fixed: Port Range Issue
3. Fixed: Web Camera May Sleep When There is no motion.

important!!

When upgrading from 1.7.x.x based firmware: Reset your WL500g to defaults via the restore button at the back after upgrading to this firmware!

you do not have to do this when you upgrade from 1.8.x.x based firmware!


Mirror @ Chupa.nl:
http://files.wl500g.info/asus/wl500b/firmware/wg01080109_WL500b_EN.zip

[Muffinman]

Bandwidth management is my main motivation for trying this firmware, but i guess i got disappointed. As i would like to make sure my voip adapter has adequate bandwidth available, this feature is handy. But i would need to be able to set minimum value for a range of udp 16300 through 16700, and that makes a lot of entries...unless it is actually possible to enter a range and not one port at a time. Hopefully Asus will implement support for upload control by ip adress soon like they have for download.

[Antiloop]

Bandwidth management is my main motivation for trying this firmware, but i guess i got disappointed. As i would like to make sure my voip adapter has adequate bandwidth available, this feature is handy. But i would need to be able to set minimum value for a range of udp 16300 through 16700, and that makes a lot of entries...unless it is actually possible to enter a range and not one port at a time. Hopefully Asus will implement support for upload control by ip adress soon like they have for download.
hm?

this firmware doesn't have bandwidth management at all

try firmware 1.8.2.4

[waz]

Bandwidth management is my main motivation for trying this firmware, but i guess i got disappointed. As i would like to make sure my voip adapter has adequate bandwidth available, this feature is handy. But i would need to be able to set minimum value for a range of udp 16300 through 16700, and that makes a lot of entries...unless it is actually possible to enter a range and not one port at a time. Hopefully Asus will implement support for upload control by ip adress soon like they have for download.

HI, have you had any luck with the upload side of things, I'm in the same boat, is there another custom firmware around that can accomplish this, I don't want to have to go buying usb stick or hdds, to run some of hte stuff I've read on this forum