schmidt_as
20-01-2007, 12:19
Ich habe ein Problem mit meinem WL500g.
Der Router speichert die Uhrzeit nicht.
Im LOG
Unter IP/Config/Miscellaneous/ ist
Enable UPnP: Yes
Remote Log Server: leer
Time Zone: GMT+1
NTP: time.nist.gov
Die LOG-Datei sieht wie folgt aus:
Jan 1 00:00:06 pppd[87]: Plugin rp-pppoe.so loaded.
Jan 1 00:00:06 pppd[87]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 00:00:06 pppd[88]: pppd 2.4.2 started by (unknown), uid 0
Jan 1 00:00:06 pppd[88]: Using interface ppp0
Jan 1 00:00:06 pppd[88]: local IP address 10.64.xx.xx
Jan 1 00:00:06 pppd[88]: remote IP address 10.112.112.112
Jan 1 00:00:34 pppd[88]: Starting link
Jan 1 00:00:35 pppd[88]: PPP session is 261
Jan 1 00:00:35 pppd[88]: Connect: ppp0 -> vlan1
Jan 1 00:00:35 pppd[88]: PAP authentication succeeded
Jan 1 00:00:35 pppd[88]: peer from calling number 00:90:1A:A0:15:24
Jan 20 06:16:32 ntp client: time is synchronized to time.nist.gov
Jan 20 08:16:32 ntp client: time is synchronized to time.nist.gov
Jan 20 10:16:34 ntp client: time is synchronized to time.nist.gov
Jan 20 12:16:34 ntp client: time is synchronized to time.nist.gov
Öffne ich das LOG z.B. morgen, sieht es genauso aus. Er speichert die Uhrzeit irgendwie nicht
Kann mir da jemand helfen
Der Router speichert die Uhrzeit nicht.
Im LOG
Unter IP/Config/Miscellaneous/ ist
Enable UPnP: Yes
Remote Log Server: leer
Time Zone: GMT+1
NTP: time.nist.gov
Die LOG-Datei sieht wie folgt aus:
Jan 1 00:00:06 pppd[87]: Plugin rp-pppoe.so loaded.
Jan 1 00:00:06 pppd[87]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 00:00:06 pppd[88]: pppd 2.4.2 started by (unknown), uid 0
Jan 1 00:00:06 pppd[88]: Using interface ppp0
Jan 1 00:00:06 pppd[88]: local IP address 10.64.xx.xx
Jan 1 00:00:06 pppd[88]: remote IP address 10.112.112.112
Jan 1 00:00:34 pppd[88]: Starting link
Jan 1 00:00:35 pppd[88]: PPP session is 261
Jan 1 00:00:35 pppd[88]: Connect: ppp0 -> vlan1
Jan 1 00:00:35 pppd[88]: PAP authentication succeeded
Jan 1 00:00:35 pppd[88]: peer from calling number 00:90:1A:A0:15:24
Jan 20 06:16:32 ntp client: time is synchronized to time.nist.gov
Jan 20 08:16:32 ntp client: time is synchronized to time.nist.gov
Jan 20 10:16:34 ntp client: time is synchronized to time.nist.gov
Jan 20 12:16:34 ntp client: time is synchronized to time.nist.gov
Öffne ich das LOG z.B. morgen, sieht es genauso aus. Er speichert die Uhrzeit irgendwie nicht
Kann mir da jemand helfen