Bekijk de volledige versie : use 2 printers at the same time
anonymoez
22-08-2004, 10:17
Is it possible to connect two printers to my WL-500g and use the at the same time using the original Asus firmware? I have 1 HP Laserjet 1100 on LPT and 1 Canon i865 on USB. I'm using firmware 1.8.1.7. If it is possible how do I set it up?
Antiloop
22-08-2004, 12:07
No, read the FAQ at the ASUS site first please
according to asus it will NEVER be
Hi
The LPR solution in the Original firmware wont support this, but in the custom Firmware it is quite simple to modify the p9100d daemon call to use lp0 and lp1 on USB rather than lp0 and the hardware LPT port...
Antiloop
22-08-2004, 23:57
Hi
The LPR solution in the Original firmware wont support this, but in the custom Firmware it is quite simple to modify the p9100d daemon call to use lp0 and lp1 on USB rather than lp0 and the hardware LPT port...
the custom firmware supports this already standard out of box (current latest is 1.7.5.9cr5)
port 9100 = for LPT printer
port 9101 = for USB printer
i'm using this configuration myself for a few months already with success
Ah, seems im blind :p.
Thought he ment 2 USB Printers...
Ah, seems im blind :p.
Thought he ment 2 USB Printers...
No he did mean one LPT and one USB (sometimes reading is difficult, I know :D )
The original question:
Is it possible to connect two printers to my WL-500g and use the at the same time using the original Asus firmware? I have 1 HP Laserjet 1100 on LPT and 1 Canon i865 on USB. I'm using firmware 1.8.1.7. If it is possible how do I set it up?
So to clarify, according to Antiloop....
It is not possible with Asus firmware,
"No, read the FAQ at the ASUS site first please...
according to asus it will NEVER be"
but... "the custom firmware supports this already standard out of box (current latest is 1.7.5.9cr5)
port 9100 = for LPT printer
port 9101 = for USB printer
i'm using this configuration myself for a few months already with success"
I'm pretty excited because I've been wondering if I could do this. I'll have to try it when I get home tonight.
BTW thanks for all of your work Antiloop.
Antiloop
24-08-2004, 14:04
So to clarify, according to Antiloop....
It is not possible with Asus firmware,
"No, read the FAQ at the ASUS site first please...
according to asus it will NEVER be"
but... "the custom firmware supports this already standard out of box (current latest is 1.7.5.9cr5)
port 9100 = for LPT printer
port 9101 = for USB printer
i'm using this configuration myself for a few months already with success"
I'm pretty excited because I've been wondering if I could do this. I'll have to try it when I get home tonight.
BTW thanks for all of your work Antiloop.
yes it works for me, but connect 1 to LPT and 1 to USB ofcourse
and especially thank Oleg for supplying this great custom firmwares and knowledge about it
yes it works for me, but connect 1 to LPT and 1 to USB ofcourse
and especially thank Oleg for supplying this great custom firmwares and knowledge about it
Yes I am looking to connect 1 to LPT and 1 to USB as well.
And...
Most certainly a big thanks goes out to Oleg as well!!
If you used a usb hub, could you print from 2 usb printers? I guessing that currently this is a no, but would it be possible in the future?
Thanks.
Antiloop
20-01-2005, 08:00
If you used a usb hub, could you print from 2 usb printers? I guessing that currently this is a no, but would it be possible in the future?
Thanks.
this is already possible, see the first custom release which supports 2 printers (see the wl500g firmware releases), it notes what to do if you want to use 2 usb printers
Do I just need to run a command like this:
/usr/sbin/p9101d -f /dev/usb/lp1 2 (from http://wl500g.info/showthread.php?p=3924&postcount=4 )
I can confirm that 1 LPT and 1 USB printer will work with the custom firmwares. I have it up and working that way right now.
Don't know about 2 USB's
Do I just need to run a command like this:
/usr/sbin/p9101d -f /dev/usb/lp1 2 (from http://wl500g.info/showthread.php?p=3924&postcount=4 )
yes and then use port 9102 for this printer.
mike_dowler
11-10-2005, 13:23
:confused:
Please help me, and sorry if this has already been covered, but I have NO experience of UNIX so I'm not really sure...
I recently bought a WL-500g Deluxe (aka WL-500gx), mainly because I wanted to be able to share two USB printers. Of course, when I got it home, I discovered that it will only (natively) work with one printer, although I think it is a great router in lots of other ways.
As I understand it, I can make it work with two printers by doing the following:
1) Install Oleg's custom firmware
Will I still have access to the features in the ASUS firmware? e.g. WPA, web interface etc.? I don't want to change the firmware and then find that I can't operate the router any more due to total lack of UNIX knowledge
2) Telnet into the router
Can I do this vis standard Win XP telnet? Or do I need some other software. Presumably I just type "open 192.168.1.1" and login as usual?
3) Type "/usr/sbin/p9101d -f /dev/usb/lp1 2"
Is this correct? Remember, I have no idea what this does, so would be grateful if someone would tell me exactly what I need to do!
4) Connect the two printers and set them up in RAW mode on Windows, with one printer on port 9101 and the other on 9102
How do I know which port to use for which printer? Does it matter?
Will I have to reconfigure all the wireless settings, or will they still be stored?
Sorry to be a nuisance, and thanks in advance for your help!
P.S. Is it also possible to change the login name to something other than "admin"? I have changed the password, but would feel a bit happier if the login was something other than the default as well.
mike_dowler
11-10-2005, 21:44
OK - I have taken the plunge and had a play, and I have installed Oleg's latest custom firmware (thanks, Oleg!). Many of my questions have been answered (it is exactly the same web interface, only with more features, and it is possible to change the login name!)
I have installed one USB printer (on port 9100), and /dev/usb/ shows lp0.
However, /usr/sbin/ doesn't have a file called "p9101d" (although it does have "p910nd"), so when I try "/usr/sbin/p9101d -f /dev/usb/lp1 2", it says:
"-sh: /usr/sbin/p9101d: not found"
What do I need to type/do? Also, Oleg's excellent how-to is only for one printer - do I add the second printer on the same printer port, or do I need to create another port on the same IP address (IP2_198.160.1.1?) - with port 9101?
Please help! :o
Mike
Using 2 usb printers is a mess... The problem is that they could be renumbered due to plug-and-play, so you will got problems, like printers are get swapped at some point. The 2 printers trick works great with wl500g (not deluxe), driving one usb and one parallel printer.
Anyway, here is the line you're looking for:
p910nd -f /dev/usb/lp1 1
This way second usb printer attached to deluxe would be available as port 9101.