PDA

Bekijk de volledige versie : USB Transfer rate



Zigster
05-11-2006, 22:29
Hi Forum,

by buying the wl500gp I assumed, that the USB port was USB2.0 (Asus says that too), but the transfer performance (Samba) is really horrible: copying from USB attached HDD takes ages (3 GB = 45 mins!!).

Is this Samba related ? Anything configurable ?

Thank you for your help and/or suggestions

Zigster

PS: Oleg's FW running... btw: great work !!

yellowbug
09-11-2006, 17:06
I got 600-700KB/s Samba download speed and 800-900KB/s Samba upload speed(yes, upload is even more fast than download) with my wl500gp,FTP will got extra 200KB/s speed,Works with my IBM T-42 laptop(Intel Wireless 2200BG inside)

calaba
09-11-2006, 17:23
So you have the same transfer rate because:

cca. 1MB/s for 3 000 MB (3GB) = 3000 sec = cca. 50mins.

:rolleyes:

yellowbug
10-11-2006, 00:24
But USB 1.1 bound-rate should be 12Mbps, And USB 2.0 bound-rate should be 480Mbps.

_H_o_L_E_
10-11-2006, 13:02
i get around 2,5mb/s with samba

nfs is faster, 4mb/s

GLO
26-12-2006, 03:46
So if transfer rates with the WL-500Gp is slow, could it really only be a usb1.1 connection? :confused:

And if its it that slow with the USB2.0, then we may as well just buy a USB1.1 external HDD and not USB 2.0 as it wont use the bandwidth at all.

Do i understand this properly?

viktike
26-12-2006, 21:38
I don't think it's usb1.1 because for me download speed is 1.5MB/s whitch means around 16-18Mbps what is faster than 1.1. My opinion is the "System bus" is too slow, because I turned off WEP, disabled the internet firewall... And it's getting faster for me.

KSzasza
28-12-2006, 20:15
hmmm... about speed.... I've created a local network through this router. Instaelled an ftp server (Serv-U) on the desktop while, I am connecting to this server with my laptop. If I connect the USB HD to the desktop USB Port then I have 11,000 kbyte/s dl speed through ftp. If I connect the same USB HD to the router USB port than I have only 1200 kbyte/s with the same protocol, which is wierd.

I would like to use my HD as a shared centralized drive together with my 2-3 computers. But now the only option is to connect it to one of my computer, because 1/10 of the physical speed is just not enough.