schigndix
08-10-2006, 14:35
Hello all,
after several flashing-actions of Oleg and OpenWRT firmware, the Oleg-Wegconfig of Oleg-firmware is now requesting to select a user-name, every time when i want to configure the WAN&LAN settings.
Therefore a new window pops up, with 4 empty entries:
<>
<>
<>
<>
I tried to find out, which settings (NVRAM) are the reason for this strange behavior.. but i couldnt figure them out.
Is there a possibility to delete all needless NVRAM settings?
I have read, that erasing the NVRAM on WL-500gp (mtd -r erase nvram) will result in a dead-box, because the WL-500gp does not write default-settings on startup.
I have already flashed the wl500g-clear-nvram.trx and wl500g-recover.trx but without any success. It seems that that the ...clear-nvram.trx is only clearing the NVRAM-settings used by Oleg, not all NVRAM-settings
THX in advance
after several flashing-actions of Oleg and OpenWRT firmware, the Oleg-Wegconfig of Oleg-firmware is now requesting to select a user-name, every time when i want to configure the WAN&LAN settings.
Therefore a new window pops up, with 4 empty entries:
<>
<>
<>
<>
I tried to find out, which settings (NVRAM) are the reason for this strange behavior.. but i couldnt figure them out.
Is there a possibility to delete all needless NVRAM settings?
I have read, that erasing the NVRAM on WL-500gp (mtd -r erase nvram) will result in a dead-box, because the WL-500gp does not write default-settings on startup.
I have already flashed the wl500g-clear-nvram.trx and wl500g-recover.trx but without any success. It seems that that the ...clear-nvram.trx is only clearing the NVRAM-settings used by Oleg, not all NVRAM-settings
THX in advance