PDA

Bekijk de volledige versie : KONICA MINOLTA 2300W [LPT] - Unable to print



mattez
09-06-2006, 16:18
Hi guys,
in first of all I would like to (like others) thank all the persons that work on the WL-500g for their amazing job, and especially Oleg.

Im trying to print to KONICA MINOLTA 2300W over LPT. I spent some hours with that, with no special results. I try to find this printer model in (non)Compatible Hardware (http://wl700g.info/showthread.php?t=93) with no result.

Windows XP SP2

My Product ID:WL500g
My Firmware Version:1.9.2.7
My Firmware Release:1.9.2.7-7d

In "Status & Log - Status" section is
Printer Model:KONICA MINOLTA mc2300W
Printer Status:On-line

this is fine ;)

I installed standart printer drivers. Then I seted up a PORT.
I tried both LPR (http://wl500g.info/faq.php?faq=asus_wl_x#faq_wirelesslowslowdropsconn ection) and RAW (PORT nr. 9101 indeed).
All the time when I try to print test page popup in tray appears with error msg - someting like "Printing of this file was unsuccessful". But It tries to print it again and again. Status is changing "printing"/"printing-error"/"printing"/"printing-error"/...
When I use LPR there is nothning in LOG. When I use RAW there is

.....
.....
Jun 9 15:19:54 p9101d[67]: Connection from 192.168.1.10 port 1282 accepted
Jun 9 15:19:54 p9101d[67]: Finished job: 9 bytes received
Jun 9 15:19:59 p9101d[67]: Connection from 192.168.1.10 port 1283 accepted
Jun 9 15:20:00 p9101d[67]: Finished job: 9 bytes received
Jun 9 15:20:05 p9101d[67]: Connection from 192.168.1.10 port 1289 accepted
Jun 9 15:20:05 p9101d[67]: Finished job: 9 bytes received
Jun 9 15:20:10 p9101d[67]: Connection from 192.168.1.10 port 1290 accepted
Jun 9 15:20:10 p9101d[67]: Finished job: 9 bytes received
Jun 9 15:20:15 p9101d[67]: Connection from 192.168.1.10 port 1292 accepted
Jun 9 15:20:15 p9101d[67]: Finished job: 9 bytes received
Jun 9 15:20:20 p9101d[67]: Connection from 192.168.1.10 port 1297 accepted
Jun 9 15:20:20 p9101d[67]: Finished job: 9 bytes received
Jun 9 15:20:25 p9101d[67]: Connection from 192.168.1.10 port 1301 accepted
Jun 9 15:20:25 p9101d[67]: Finished job: 9 bytes received
.....
.....again & again until print abort


Where is the problem? Is this printer supported? Is here any solution? Thanx a lot for your help.
..and realy sorry for my English :rolleyes:

Oleg
13-06-2006, 20:19
Looks like it's not supported. Try other drivers on your PC for similar models...