Dokus
01-03-2006, 17:16
Onderstaande heb ik zojuist per ongeluk op de verkeerde plek gepost:o
Hoi ik gebruik het programma RemotelyAnywhere. (http://www.remotelyanywhere.com/)
Dat gaat goed binnen het netwerk, maar als ik mijn computer wil benaderen vanuit een andere locatie dan wil me dat niet lukken. :mad:
In de Q&A van RemotelyAnywhere staat het volgende:
Stel extern IP adres router is: 111.111.111.111
en van de computer is: 192.168.0.10 en ik gebruik poort 2000 om binnen te komen. dan moet ik... (nu even letterlijk de tekst):
STEP 1) Map a port from the router to the computer. In this case, you could pick a port on the router (say, 5200) and map it to 192.168.0.10:2000.
Mapping ports from routers to computers is router-specific. Usually your router will have a web-based interface that allows you to configure and maintain it. Sometimes router companies refer to this action as 'Port Forwarding', Port Mapping', 'Opening a Pinhole', and 'Port Range Forwarding.'
STEP 2) Having done the above, you will now be able to fully access the RemotelyAnywhere computer with the URL http://111.111.111.111:5200 or https://111.111.111.111:5200 - that is, the router's external IP and the port you mapped to the RemotelyAnywhere machine.
Maar ik krijg het niet voor elkaar.
Kan iemand het mij stap voor stap uitleggen hoe dat gaat in de Asus WL500g?
Alvast bedankt
Hoi ik gebruik het programma RemotelyAnywhere. (http://www.remotelyanywhere.com/)
Dat gaat goed binnen het netwerk, maar als ik mijn computer wil benaderen vanuit een andere locatie dan wil me dat niet lukken. :mad:
In de Q&A van RemotelyAnywhere staat het volgende:
Stel extern IP adres router is: 111.111.111.111
en van de computer is: 192.168.0.10 en ik gebruik poort 2000 om binnen te komen. dan moet ik... (nu even letterlijk de tekst):
STEP 1) Map a port from the router to the computer. In this case, you could pick a port on the router (say, 5200) and map it to 192.168.0.10:2000.
Mapping ports from routers to computers is router-specific. Usually your router will have a web-based interface that allows you to configure and maintain it. Sometimes router companies refer to this action as 'Port Forwarding', Port Mapping', 'Opening a Pinhole', and 'Port Range Forwarding.'
STEP 2) Having done the above, you will now be able to fully access the RemotelyAnywhere computer with the URL http://111.111.111.111:5200 or https://111.111.111.111:5200 - that is, the router's external IP and the port you mapped to the RemotelyAnywhere machine.
Maar ik krijg het niet voor elkaar.
Kan iemand het mij stap voor stap uitleggen hoe dat gaat in de Asus WL500g?
Alvast bedankt