Problem with Seitec USB Memory Stick

[likeapear]

Hello, I have problem with my USB Memory Stick. It is not recognized. It is Seitec PR 1020 128MB. On my laptop it works fine but on router it doesn't. Other usb sticks works fine on both (on laptop and on router).

I'm using latest Oleg's firmware (1.9.2.7-7b). What to do?

Thank you

There is my system log:


Feb 21 17:28:32 kernel: hub.c: new USB device 00:04.0-1, assigned address 5
Feb 21 17:28:32 kernel: hub.c: USB hub found
Feb 21 17:28:32 kernel: hub.c: 1 port detected
Feb 21 17:28:33 kernel: hub.c: new USB device 00:04.0-1.1, assigned address 6
Feb 21 17:28:37 kernel: sda : READ CAPACITY failed.
Feb 21 17:28:37 kernel: sda : status = 1, message = 00, host = 0, driver = 08
Feb 21 17:28:37 kernel: Current sd00:00: sns = 70 2
Feb 21 17:28:37 kernel: ASC=3a ASCQ= 0
Feb 21 17:28:37 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
Feb 21 17:28:37 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Feb 21 17:28:37 kernel: sda: Write Protect is off
Feb 21 17:28:37 kernel: /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Feb 21 17:28:37 kernel: I/O error: dev 08:00, sector 0
Feb 21 17:28:37 kernel: sda : READ CAPACITY failed.
Feb 21 17:28:37 kernel: sda : status = 1, message = 00, host = 0, driver = 08
Feb 21 17:28:37 kernel: Current sd00:00: sns = 70 2
Feb 21 17:28:37 kernel: ASC=3a ASCQ= 0
Feb 21 17:28:37 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00
Feb 21 17:28:37 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Feb 21 17:28:37 kernel: sda: Write Protect is off
Feb 21 17:28:37 kernel: /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Feb 21 17:28:37 kernel: I/O error: dev 08:00, sector 0
Feb 21 17:28:37 kernel: unable to read partition table
Feb 21 17:28:37 kernel: Device busy for revalidation (usage=1)
Feb 21 17:28:37 kernel: Device 08:00 not ready.
Feb 21 17:28:37 kernel: I/O error: dev 08:00, sector 2
Feb 21 17:28:37 kernel: EXT3-fs: unable to read superblock
Feb 21 17:28:37 kernel: MSDOS FS: Using codepage 950
Feb 21 17:28:37 kernel: MSDOS FS: IO charset cp950
Feb 21 17:28:37 kernel: Device 08:00 not ready.
Feb 21 17:28:37 kernel: I/O error: dev 08:00, sector 0
Feb 21 17:28:37 kernel: FAT: unable to read boot sector
Feb 21 17:28:37 kernel: FAT: freeing iocharset=cp950
Feb 21 17:28:37 kernel: Device 08:00 not ready.
Feb 21 17:28:37 kernel: I/O error: dev 08:00, sector 0
Feb 21 17:28:37 kernel: FAT: unable to read boot sector
Feb 21 17:28:37 kernel: Device 08:00 not ready.
Feb 21 17:28:37 kernel: I/O error: dev 08:00, sector 0
Feb 21 17:28:37 kernel: NTFS: Reading super block failed
Feb 21 17:28:37 kernel: Device not ready. Make sure there is a disc in the drive.
Feb 21 17:28:37 kernel: sdb : READ CAPACITY failed.
Feb 21 17:28:37 kernel: sdb : status = 1, message = 00, host = 0, driver = 08
Feb 21 17:28:37 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70 2
Feb 21 17:28:37 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00
Feb 21 17:28:37 kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
Feb 21 17:28:37 kernel: /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: Device not ready. Make sure there is a disc in the drive.
Feb 21 17:28:37 kernel: sdb : READ CAPACITY failed.
Feb 21 17:28:37 kernel: sdb : status = 1, message = 00, host = 0, driver = 08
Feb 21 17:28:37 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70 2
Feb 21 17:28:37 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00
Feb 21 17:28:37 kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
Feb 21 17:28:37 kernel: /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: unable to read partition table
Feb 21 17:28:37 kernel: Device not ready. Make sure there is a disc in the drive.
Feb 21 17:28:37 kernel: sdb : READ CAPACITY failed.
Feb 21 17:28:37 kernel: sdb : status = 1, message = 00, host = 0, driver = 08
Feb 21 17:28:37 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70 2
Feb 21 17:28:37 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00
Feb 21 17:28:37 kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
Feb 21 17:28:37 kernel: /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: unable to read partition table
Feb 21 17:28:37 kernel: Device not ready. Make sure there is a disc in the drive.
Feb 21 17:28:37 kernel: sdb : READ CAPACITY failed.
Feb 21 17:28:37 kernel: sdb : status = 1, message = 00, host = 0, driver = 08
Feb 21 17:28:37 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70 2
Feb 21 17:28:37 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00
Feb 21 17:28:37 kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
Feb 21 17:28:37 kernel: /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: unable to read partition table
Feb 21 17:28:37 kernel: Device not ready. Make sure there is a disc in the drive.
Feb 21 17:28:37 kernel: sdb : READ CAPACITY failed.
Feb 21 17:28:37 kernel: sdb : status = 1, message = 00, host = 0, driver = 08
Feb 21 17:28:37 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70 2
Feb 21 17:28:37 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00
Feb 21 17:28:37 kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
Feb 21 17:28:37 kernel: /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: I/O error: dev 08:10, sector 0
Feb 21 17:28:37 kernel: unable to read partition table

[likeapear]

So now I trying another USB stick and it is also very strange. If this USB stick (jogr, 128MB) is pluged-in after boot then it is recognized and works fine, but if the USB stick is plugged-in before boot it doesn't. Strange. What's wrong?

[likeapear]

May I try to format USB stick to ext2 or ext3 filesystem?

[likeapear]

Well, Oleg, is there any chance this issue will be solved in next firmware version? Or must I buy a new USB disk?

I'm little bit confused :-(

[Oleg]

No, this is not a firmware bug and looks like a hw compatibility problem. So, do not use this stick.

[likeapear]

No, this is not a firmware bug and looks like a hw compatibility problem. So, do not use this stick.

Thank you for answer.