PDA

Bekijk de volledige versie : Printer works but there are mistakes on pages



Tnet
01-06-2004, 21:47
I have LaserJet 4 Plus, WIN XP, WL500b original firmware. When I print it works perfect but on some pages it makes terrible mistaken symbols or empty places. :(
Is it problem of router, printer driver or RAW mode? (I have tried several print drivers)

Any advices?
Thank you.

Oleg
01-06-2004, 22:26
Wild guess. Is your printer connected via LPT port? If so, try shorter cable. :)

Tnet
02-06-2004, 19:53
When I connect LPT cable to PC everithing is OK.->Cable is OK :o Router makes errors.

Oleg
02-06-2004, 21:10
Yes, but ASUS wl500g does not have many things which PCs has - like the shielding, ground wire and so on.
The biggest reason for "mistakes" is the noise, not the software.

Technik
02-06-2004, 21:56
When I connect LPT cable to PC everithing is OK.->Cable is OK :o Router makes errors.
So what's the length of your printer cable? If it's longer than 2 meters, I would also recommend to use shorter one.
Another solution could be to replace 4k7 pull-up resistors inside the router... :D

Tnet
06-06-2004, 20:54
The cable was 3m long:eek: I have replaced it with better shielded 2m long one. I didn't thought that router is more affected by noise. I hope it will be perfect now. Thank you :D :D