Bekijk de volledige versie : GUI for Iptable & Oleg Firmware
Robinton
30-01-2006, 09:29
Does anyone uses a GUI for Iptable ?
I would like to find one (under windows) to manipulate iptable, but i don't know if this exist ...... I found FWBuilder but i don't know if it apply in wl500g case.
I am using fwbuilder to create the firewall rules for my wl-500g. But this is not easy since you have to configure a lot to make it work. Since the router is running linux, you must have some experience with linux, especially with the network configuration.
So since you are asking for a windows frontend I guess fwbuilder is not the right choice for you.
Robinton
07-02-2006, 13:57
In fact, i have found a Fwbuilder running under Windows, but i don't know what template to use to create rules for the linux installed on the WL500.
May be the best should be to try ..... and to reset the box if nothing work :)
Thanks for your answer wfleck !
Yes, I know there is a fwbuilder version for windows, but it is commercial software.
As a starting point you could use the Linksys/Sveasoft template. This is for a Linksys WRT54G running Sveasoft firmware. But be aware that the generated firewall script will not run out of the box.
But maybe I can answer some of your questions when you try it got stuck.