bugs_bunny
28-01-2006, 22:27
i need help! I bought a asus wl-500g some time ago and last week i configured it was a printserver and it works fine,
but now I bought a philips SPD5100CC hard disk 160Gb and i it doesn't work, in the system log "Jan 28 16:12:22 USB webcam: attached" and it's a HDD!!
can you tell me how can i make it work?? step by step?
the firmware is 1.9.5.0 from asus
I have the same problem! im using a Creative Muvo Slim (Portable media player)
kernel: hub.c: new USB device 00:04.0-1, assigned address 4
USB webcam: attached
I tryed another usb stick, and that one was working good, but i want this one to work!
Here i have some more information, i realy hope someone can help me:
"T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=b8004000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=041e ProdID=4112 Rev=11.13
S: Manufacturer=CREATIVE
S: Product=MuVo Slim
S: SerialNumber=00000104DDDC071B
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms