printproblem with Lexmark E321

[viffer]

See that several others have had prblems with printing via network.
I have a win XP sp2, connected to the 500g via ethernet-cable, and a Lexmark E321 laserprinter connected to the 500g with aUSB-cable. and firmware 1.9.2.7
last driver from Lexmark on the computer, and the printerdriver i set to use 9100/raw.
1st print is ok, second keep spitting out paper untill i turn the printer off.

Anyone can help me?

[WlanMan]

Hi

Lexmark is the worst buy on printers you can do, but this has not necessarily to do with your printing problem. You habe olegs firmware and enabled raw printing (i suspect so)?

Greets
Wlanman

[viffer]

Hi

Lexmark is the worst buy on printers you can do, but this has not necessarily to do with your printing problem. You habe olegs firmware and enabled raw printing (i suspect so)?

Greets
Wlanman

you have to differ between the ink-printers and the lasers. the E321 is one of the best small business monochrome laserprinters out there.

And i have the 1.9.2.7 firmware and RAWprint.

[viffer]

Looks like the problems are gone with Olegs 1.9.2.7-7b firmware, and the removal of "activate advanced printer settings" in the printer setup of the Lexmark E321.

[WlanMan]

Looks like the problems are gone with Olegs 1.9.2.7-7b firmware, and the removal of "activate advanced printer settings" in the printer setup of the Lexmark E321.

Hi

The later one is the important part, it disables the advanced reporting stuff of the printer which on most printers does not work over network.

Mfg